Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Left,
Right, Drive Axle -
Transmission Type: 5-
Speed Manual Transmission - Construction Year to: 04.2002
- Inner Diameter [mm]: 48
- Outer Diameter [mm]: 62
- Height [mm]: 7
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Construction Year to: 04.2001
- Shape: round
- Fitting Position: both sides
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Fitting Position: Rear Axle
- Outer Diameter [mm]: 60
- Inner Diameter [mm]: 45
- Thickness [mm]: 8
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Fitting Position: Outlet
- Alternatively:
- Thickness [mm]: 7
- Inner Diameter [mm]: 48
- Outer Diameter [mm]: 62
- Weight [kg]: 0.021
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Outlet,
outer - Inner Diameter [mm]: 50
- Thickness [mm]: 10
- Seal Diameter [mm]: 65.5
- Shape: O Shape
-
Material: ACM
(Polyacrylate) - Outer Diameter [mm]: 65.5
- Weight [kg]: 0.024
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Inner Diameter [mm]: 45
- Outer Diameter [mm]: 60
- Height [mm]: 8
-
Material: ACM
(Polyacrylate) - Dust Cover: with dust lip
- Swirl Type: Alternating Twist
-
Name: Volli rongastihend,
diferentsiaal - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Construction Year to: 04.2001
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 60
- Height [mm]: 12
- Fitting Position: Drive Axle
-
Material: NBR
(nitrile butadiene rubber) - Dust Cover: with dust lip
- Swirl Type: Alternating Twist
-
Name: Volli rongastihend,
diferentsiaal - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Engine Code: AGN
- Fitting Position: frontal sided
-
Material: FPM
(fluoride rubber) - Inner Diameter 1 [mm]: 32
- Outer Diameter 1 [mm]: 47
- Height 1 [mm]: 10
- Swirl Type: Alternating Twist
- Dust Cover: with dust lip
- for OE number: 026103085D
-
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: COT
- Additional information: 12012709
- Lisainfo: 12012709
- Required quantity: 2
- Thickness [mm]: 10
- for OE number: 068 103 085 E
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Weight [kg]: 0.023
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Shape: O Shape
-
Material: NBR
(nitrile butadiene rubber) - Inner Diameter [mm]: 45
- Thickness [mm]: 6
- Seal Diameter [mm]: 60
- Outer Diameter [mm]: 40
- Weight [kg]: 0.022
- Manufacturer: VAICO
Fitting Position: Rear Axle, Rear Axle both sides, Front Axle both sides General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Outlet
- Inner Diameter 1 [mm]: 48
- Outer Diameter 1 [mm]: 62
- Height 1 [mm]: 7
-
Material: ACM
(Polyacrylate) - Dust Cover: with dust lip
- Swirl Type: Alternating Twist
-
Name: VOLLI RONGASTIHEND,
JAOTUSKAST - Manufacturer: COT
- Model Year to: 2001
- Fitting Position: Left
- Weight [kg]: 0.035
- Packaging length [cm]: 7.4
- Packaging width [cm]: 7.4
- Packaging height [cm]: 0.8
- Manufacturer: FEBEST
-
Fitting Position: Front Axle,
Outlet, Left - Inner Diameter 1 [mm]: 60
- Outer Diameter 1 [mm]: 74
- Height 1 [mm]: 8
-
Material: ACM
(Polyacrylate) - Dust Cover: with dust lip
- Swirl Type: Alternating Twist
-
Name: VOLLI RONGASTIHEND,
DIFERENTSIAAL - Manufacturer: COT
- Fitting Position: Left
- Inner Diameter [mm]: 48
- Outer Diameter [mm]: 62
- Height [mm]: 7
- Radial Shaft Seal Design: ASW
-
Material: ACM
(Polyacrylate) - Dust Cover: with dust lip
- Manufacturer: ELRING
- Fitting Position: frontal sided
- Inner Diameter [mm]: 51
- Outer Diameter [mm]: 65
- Thickness [mm]: 7
- Weight [kg]: 0.016
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- General Information: tapered ring; small
- Manufacturer: VIKA
- General Information: taper roller bearing
- Manufacturer: VIKA
- Outer Diameter [mm]: 47
- Thickness [mm]: 10
- Inner Diameter [mm]: 32
- Fitting Position: transmission sided
- Weight [kg]: 0.195
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks