Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Engine Code: ARZ,
AQA, AWD -
Construction Year from: 05.1999,
12.1999 -
Construction Year to: 09.2000,
04.2001 - Oxygen Sensor: Diagnostic Probe
- Block Separation:
- Number of circuits: 4
- Overall Length [mm]: 750
-
Manufacturer: JP GROUP A/
S - Lisainfo: Lambda sensor
- Additional information: Lambda sensor
-
External Thread [mm]: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 4
- Cable Length [mm]: 510
- Oxygen Sensor: Planar probe
- Manufacturer: JP GROUP
- Lisainfo: Lambda sensor
- Additional information: Lambda sensor
-
External Thread [mm]: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 4
- Cable Length [mm]: 620
- Oxygen Sensor: Heated
- Manufacturer: JP GROUP
- Lisainfo: Lambda sensor
- Additional information: Lambda sensor
-
External Thread [mm]: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 4
- Cable Length [mm]: 480
- Oxygen Sensor: Planar probe
- Manufacturer: JP GROUP
- Lisainfo: Lambda sensor
- Additional information: Lambda sensor
-
Oxygen Sensor: Diagnostic Probe,
Thread pre- greased - Fitting Position: after catalytic converter
-
Fabrication Number: ESL-
AU- 007 - Manufacturer: NTY
-
Name: NTY ESL-
AU- 007
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Oxygen Sensor: Diagnostic Probe,
Thread pre- greased -
Fabrication Number: ESL-
SK- 000 - Manufacturer: NTY
-
Name: NTY ESL-
SK- 000
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Oxygen Sensor: Regulating Probe,
Thread pre- greased - Number of circuits: 4
- Fitting Position: before catalytic converter
-
Fabrication Number: ESL-
AU- 011 - Manufacturer: NTY
-
Name: NTY ESL-
AU- 011
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Oxygen Sensor: Regulating Probe,
Thread pre- greased - Fitting Position: before catalytic converter
-
Fabrication Number: ESL-
AU- 008 - Manufacturer: NTY
-
Name: NTY ESL-
AU- 008
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Oxygen Sensor: Regulating Probe
- Number of circuits: 4
- Manufacturer: KAMOKA
-
Oxygen Sensor: Heated,
Regulating Probe -
Thread Size: M18 x 1,
5 - Cable Length [mm]: 625
- Number of pins: 4
- Manufacturer: JP GROUP
- Lisainfo: Lambda sensor
- Additional information: Lambda sensor
- Technical Information Number: Universal
- Overall Length [mm]: 325
- Number of pins: 4
- Oxygen Sensor: Regulating Probe
- Manufacturer: ASHIKA
-
Lisainfo: 43-
U04 -
Additional information: 43-
U04
-
Overall Length [mm]: 1,
000 - Number of pins: 4
- Oxygen Sensor: Heated
- Manufacturer: JP GROUP
- Lisainfo: Lambda sensor
- Additional information: Lambda sensor
- Technical Information Number: Universal
- Overall Length [mm]: 325
- Number of pins: 4
- Oxygen Sensor: Regulating Probe
- Manufacturer: JAPKO
-
Engine Code: ARZ,
AUM, AGU -
Oxygen Sensor: Diagnostic Probe,
Planar probe - Fitting Position: after catalytic converter
- Number of pins: 4
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Engine Code: AGU,
AQA - Construction Year to: 05.2003
-
Oxygen Sensor: Regulating Probe,
Heated - Fitting Position: before catalytic converter
- Number of circuits: 4
- Overall Length [mm]: 720
- Name: LAMBDA ANDUR
- Manufacturer: MAX
-
Engine Code: AGU,
AQA - Construction Year to: 05.2003
-
Oxygen Sensor: Regulating Probe,
Finger probe - Fitting Position: before catalytic converter
- Number of circuits: 4
- Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: MAX
-
Lisainfo: MGS-
505 -
Additional information: MGS-
505
-
Engine Code: ARZ,
AUM - Length [mm]: 880
- Oxygen Sensor: Planar probe
- Manufacturer: DELLO AUTOMEGA
- Engine Code: ARZ
-
Oxygen Sensor: Diagnostic Probe,
Oxygen Sensor -
Fitting Position: Front,
after catalytic converter - Number of circuits: 4
- Length [mm]: 480
- Name: LAMBDA ANDUR
- Manufacturer: MAX
- Engine Code: ARZ
- Construction Year from: 05.1999
- Construction Year to: 09.2000
-
Oxygen Sensor: Diagnostic Probe,
Heated - Fitting Position: after catalytic converter
- Number of circuits: 4
- Overall Length [mm]: 750
- Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: MAX
-
Engine Code: ARZ,
AUM, AGU - Fitting Position: after catalytic converter
- Number of pins: 4
- Rated Voltage [V]: 12
-
Oxygen Sensor: Planar probe,
Heated - Connector Shape: D Shape
- Cable Length [mm]: 730
- Overall Length [mm]: 757
- Spanner Size: 22
- Thread Size: M 18
- Thread Pitch [mm]: 1.5
- Supplementary Article/Supplementary Info: with cable tie
- Lubrication: with grease lubrication
- Full Set:
- Manufacturer: TOPRAN HANS PRIES
Supplementary Article/Info 2: with plastic socket, with heat shield pipe, with mounting manual General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Front
- Engine Code: ARZ
- Oxygen Sensor: Diagnostic Probe
- Length [mm]: 940
- Number of connectors: 4
- Manufacturer: VERNET
- Engine Code: AGU
- Construction Year from: 08.1998
- Construction Year to: 04.2002
- Transmission Type: Automatic Transmission
-
Exhaust System: for pre-
catalytic converter - Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 750
- Number of pins: 4
- Weight [g]: 103
- Gross Weight [g]: 152
- Manufacturer: DENSO
-
Name: DN DOX-
0117
Oxygen Sensor: Regulating Probe, Heated, Finger probe, Oxygen Sensor
Additional information: "Tootja: DENSO
A4 AVANT (8D5, B5),
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
A4 AVANT (8D5, B5),
(kvaliteediklass: Q)"
-
Engine Code: ARZ,
AUM - Construction Year from: 05.1999
-
Construction Year to: 09.2000,
05.2003 -
Oxygen Sensor: Regulating Probe,
Diagnostic Probe, Heated - Block Separation:
- Number of circuits: 4
- Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: MAX
-
Lisainfo: MGS-
615 -
Additional information: MGS-
615
Fitting Position: before catalytic converter, after catalytic converter
- Engine Code: AGU
-
Oxygen Sensor: Regulating Probe,
Heated -
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 4
- Cable Length [mm]: 720
- Weight [kg]: 0.118
- for OE number: 06A 906 265 F
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: AGU
-
Fitting Position: Front,
before catalytic converter -
Line insulation design: with silicone-
coated woven- fibre insulation - Connector Shape: D Shape
- for OE number: 030 906 265 CB
- Length [mm]: 465
- Weight [kg]: 0.171
-
Thread Size: M18 x 1,
5 - Socket colour: black
- Cable Length [mm]: 470
- Number of pins: 4
-
Oxygen Sensor: Regulating Probe,
Thread pre- greased - Number of circuits: 4
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Front,
after catalytic converter - Engine Code: ARZ
-
Line insulation design: with silicone-
coated woven- fibre insulation - Cable Length [mm]: 720
-
Oxygen Sensor: Diagnostic Probe,
Thread pre- greased - Number of circuits: 4
- Weight [kg]: 0.156
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year from: 05.1999
- Construction Year to: 09.2000
-
Oxygen Sensor: Regulating Probe,
Planar probe, Heated - Engine Code: ARZ
-
Cable Length [mm]: 1,
530 - Name: LAMBDA ANDUR
- Manufacturer: DLP
- Quality class: PJ
Additional information: "Tootja: DELPHI
A3 (8L1), 09.96-05.0
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
A3 (8L1), 09.96-05.0
(kvaliteediklass: PJ)"
-
Oxygen Sensor: Regulating Probe,
Finger probe, Heated - Fitting Position: before catalytic converter
- Engine Code: AGU
- Cable Length [mm]: 730
- Name: LAMBDA ANDUR
- Manufacturer: DLP
Additional information: "Tootja: DELPHI
OCTAVIA COMBI (1U5),
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
OCTAVIA COMBI (1U5),
(kvaliteediklass: PJ)"
- Engine Code: ARZ
- Construction Year from: 05.1999
- Construction Year to: 09.2000
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Length [mm]: 700
- Technical Information Number: Universal 77015
- Manufacturer: FAE
-
Oxygen Sensor: Regulating Probe,
Heated - Number of pins: 4
- Cable Length [mm]: 600
- for OE number: 06A906265F
- Manufacturer: MEAT&DORIA
- Construction Year from: 10.1997
- Oxygen Sensor: Regulating Probe
- Voltage [V]: 12
- Length [mm]: 730
- Guarantee: 3 years guarantee
- Number of circuits: 4
- Weight [kg]: 0.16
- Resistor [Ohm]: 2.1
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Name: CE 09SKV602
- Manufacturer: ESEN SKV
- Engine Code: ARZ
- Construction Year from: 05.1999
- Construction Year to: 09.2000
-
Oxygen Sensor: Regulating Probe,
Unheated - Fitting Position: Exhaust Manifold
- Number of pins: 4
- Cable Length [mm]: 630
- Quality: OE EQUIVALENT
- for OE number: 06A906262AS
- Manufacturer: MEAT&DORIA
- Resistor [Ohm]: 9
- Length [mm]: 721
- Number of circuits: 4
- Conductor Number: 4
- Cable Length [mm]: 721
- Oxygen Sensor: Heated
- Name: LAMBDA ANDUR
- Manufacturer: MAG
- Oxygen Sensor: Oxygen Sensor
- Cable Length [mm]: 760
- Alternatively:
- Number of circuits: 4
- Alternative Repair Kit: 570030
- Manufacturer: ERA
- Engine Code: ARZ
-
Line insulation design: with silicone-
coated woven- fibre insulation - Socket colour: brown
- for OE number: 036 906 265 H
- Length [mm]: 625
- Weight [kg]: 0.171
-
Thread Size: M18 x 1,
5 - Connector Shape: D Shape
- Cable Length [mm]: 620
- Number of pins: 4
-
Oxygen Sensor: Diagnostic Probe,
Thread pre- greased - Number of circuits: 4
- Manufacturer: VEMO GERMANY
Fitting Position: after catalytic converter, before catalytic converter General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year from: 05.1999
- Construction Year to: 09.2000
-
Oxygen Sensor: Diagnostic Probe,
Planar probe, Heated - Engine Code: ARZ
- Cable Length [mm]: 700
- Name: LAMBDA ANDUR
- Manufacturer: DLP
- Quality class: PJ
Additional information: "Tootja: DELPHI
BORA (1J2), 10.98-09
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
BORA (1J2), 10.98-09
(kvaliteediklass: PJ)"
- Oxygen Sensor: Oxygen Sensor
-
Cable Length [mm]: 1,
750 - Number of circuits: 4
- Manufacturer: ERA
- Engine Code: ARZ
-
Oxygen Sensor: Diagnostic Probe,
Heated -
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 4
- Cable Length [mm]: 580
- Weight [kg]: 0.097
- for OE number: 06A 906 262 AH
- Name: SW 33 10 3202
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: AGU
- Fitting Position: before catalytic converter
- Length [mm]: 700
- Cable Length [mm]: 720
- Conductor Number: 4
- Available as universal article as well, see article no.: 1.997.007
- Number of circuits: 4
- Name: EP 1.997.163
- Manufacturer: EPS
Oxygen Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased
- Engine Code: AUM
- Construction Year from: 09.2000
- Construction Year to: 05.2003
-
Oxygen Sensor: Diagnostic Probe,
Unheated - Number of pins: 4
-
Cable Length [mm]: 1,
050 - Quality: OE EQUIVALENT
- for OE number: 058906265B
- Manufacturer: MEAT&DORIA
- Construction Year from: 05.1999
- Construction Year to: 09.2000
- Oxygen Sensor: Diagnostic Probe
- Voltage [V]: 12
- Length [mm]: 760
- Guarantee: 3 years guarantee
- Number of circuits: 4
- Weight [kg]: 0.15
- Resistor [Ohm]: 9
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Name: CE 09SKV694
- Manufacturer: ESEN SKV
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Engine Code: ARZ
- Construction Year from: 05.1999
- Construction Year to: 09.2000
- Length [mm]: 550
- Technical Information Number: Universal 77015
- Manufacturer: FAE
- Engine Code: AGU
- Construction Year from: 10.1997
- Construction Year to: 05.2003
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Length [mm]: 720
- Number of pins: 4
- Technical Information Number: Universal 77004
- Manufacturer: FAE
- Construction Year to: 05.2003
- Engine Code: AGU
- Oxygen Sensor: Heated
- Number of pins: 4
- Cable Length [mm]: 500
- Quality: OE EQUIVALENT
- for OE number: 466016355034
- Manufacturer: MEAT & DORIA
-
Oxygen Sensor: Diagnostic Probe,
Planar probe, Heated - Fitting Position: after catalytic converter
- Engine Code: ARZ
- Cable Length [mm]: 740
- Name: LAMBDA ANDUR
- Manufacturer: DLP
- Construction Year from: 10.1997
- Oxygen Sensor: Oxygen Sensor
- Voltage [V]: 12
- Length [mm]: 760
- Guarantee: 3 years guarantee
- Number of circuits: 4
- Weight [kg]: 0.15
- Resistor [Ohm]: 9
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Name: CE 09SKV644
- Manufacturer: ESEN SKV
- Construction Year from: 09.2000
- Construction Year to: 05.2003
- Fitting Position: after catalytic converter
- Engine Code: AUM
- Cable Length [mm]: 880
-
Oxygen Sensor: Planar probe,
Heated - Manufacturer: DELPHI
-
Name: DE ES20343-
12B1
- Construction Year from: 05.1999
- Construction Year to: 09.2000
- Oxygen Sensor: Diagnostic Probe
- Voltage [V]: 12
- Length [mm]: 650
- Guarantee: 3 years guarantee
- Number of circuits: 4
- Weight [kg]: 0.15
- Resistor [Ohm]: 6
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Name: CE 09SKV706
- Manufacturer: ESEN SKV
-
Oxygen Sensor: Regulating Probe,
Thread pre- greased - Number of circuits: 5
- Fitting Position: before catalytic converter
-
Fabrication Number: ESL-
AU- 002 - Manufacturer: NTY
-
Name: NTY ESL-
AU- 002
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Engine Code: ARZ
-
Line insulation design: with silicone-
coated woven- fibre insulation - Supplementary Article/Info 2: without plug
- Number of pins: 4
- for OE number: V99760001
- Cable Length [mm]: 210
- Number of circuits: 4
- Weight [kg]: 0.09
- Length [mm]: 350
- Fitting Position: after catalytic converter
- Manufacturer: VEMO GERMANY
Oxygen Sensor: Regulating Probe, Finger probe, Heated, Thread pre-greased General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: AGU
- Construction Year from: 10.1997
- Construction Year to: 05.2003
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: BOS
-
Engine Code: ARZ,
AUM - Construction Year from: 05.1999
-
Construction Year to: 09.2000,
05.2003 -
Oxygen Sensor: Regulating Probe,
Diagnostic Probe - Block Separation:
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: BOS
Fitting Position: before catalytic converter, after catalytic converter
- Construction Year from: 10.1997
- Engine Code: AGU
- Fitting Position: before catalytic converter
-
Line insulation design: with silicone-
coated woven- fibre insulation -
Oxygen Sensor: Planar probe,
Heated, Thread pre- greased - Supplementary Article/Info 2: without plug
- Cable Length [mm]: 210
- Number of circuits: 4
- Weight [kg]: 0.09
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year from: 05.1999
- Construction Year to: 09.2000
- Engine Code: ARZ
-
Line insulation design: with silicone-
coated woven- fibre insulation - Conductor Number: 4
- Connector Shape: D Shape
- Cable Length [mm]: 225
-
Thread Size: M18 x 1,
5 - Length [mm]: 350
- Number of pins: 4
-
Version: ZR-
PLANAR - Weight [kg]: 0.129
-
Oxygen Sensor: Thread pre-
greased - Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: ARZ
- Construction Year from: 05.1999
- Construction Year to: 09.2000
- Transmission Type: Manual Transmission
-
Exhaust System: for pre-
catalytic converter - Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 750
- Number of pins: 4
- Weight [g]: 93
- Gross Weight [g]: 140
- Manufacturer: DENSO
-
Name: DN DOX-
0150 - Quality class: Q
Oxygen Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Oxygen Sensor
Additional information: "Tootja: DENSO
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"
-
Oxygen Sensor: Diagnostic Probe,
Planar probe, Heated - Fitting Position: after catalytic converter
- Engine Code: AUM
-
Cable Length [mm]: 1,
200 - Name: LAMBDA ANDUR
- Manufacturer: DLP
- Quality class: PJ
Additional information: "Tootja: DELPHI
OCTAVIA (1U2), 09.96
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
OCTAVIA (1U2), 09.96
(kvaliteediklass: PJ)"
-
Engine Code: ARZ,
AUM -
Construction Year from: 05.1999,
09.2000 -
Construction Year to: 09.2000,
05.2003 -
Oxygen Sensor: Regulating Probe,
Diagnostic Probe, Heated - Block Separation:
- Number of circuits: 4
-
Overall Length [mm]: 1,
760 - Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: MAX
Fitting Position: before catalytic converter, after catalytic converter
- Construction Year from: 05.1999
- Construction Year to: 05.2003
-
Engine Code: ARZ,
AUM -
Line insulation design: with silicone-
coated woven- fibre insulation -
Overall Length [mm]: 1,
800 - Number of pins: 4
-
Recommended change interval [km]: 160,
000 - Weight [kg]: 0.166
-
Oxygen Sensor: Thread pre-
greased - Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: AUM
- Construction Year from: 09.2000
- Construction Year to: 05.2003
- Number of pins: 5
-
Overall Length [mm]: 1,
510 - Oxygen Sensor: Regulating Probe
-
Manufacturer: JP GROUP A/
S - Lisainfo: Lambda Sensor
- Additional information: Lambda Sensor
- Fitting Position: before catalytic converter
- Engine Code: AGU
- Oxygen Sensor: Regulating Probe
- Cable Length [mm]: 720
- Number of pins: 4
- Exhaust System: before catalytic converter
- Assy./disassy. by qualified personnel required!:
- Name: Lambda andur
- Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.
-
Engine Code: ARZ,
AQA, AWD - Fitting Position: after catalytic converter
-
Oxygen Sensor: Diagnostic Probe,
Heated - Model Year from: 1999
-
Model Year to: 2000,
2001 - Block Separation:
- Length [mm]: 645
-
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 4
- Cable Length [mm]: 740
- Weight [kg]: 0.095
- Name: SW 30 93 4388
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: AGU
- Construction Year from: 08.1998
- Construction Year to: 04.2002
- Transmission Type: Automatic Transmission
-
Exhaust System: for pre-
catalytic converter - for OE number: 06A906265E
- Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 705
- Number of pins: 4
- Weight [g]: 128
- Gross Weight [g]: 158
- Manufacturer: DENSO
-
Name: DN DOX-
1551 - Quality class: Q
Oxygen Sensor: Regulating Probe, Heated, Finger probe, Oxygen Sensor
Additional information: "Tootja: DENSO
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"
- Construction Year from: 05.1999
- Construction Year to: 09.2000
- Engine Code: ARZ
-
Line insulation design: with silicone-
coated woven- fibre insulation - Weight [kg]: 0.122
- Socket colour: brown
- Connector Shape: D Shape
-
Thread Size: M18 x 1,
5 - Length [mm]: 570
- for OE number: 06A 906 262 F
- Cable Length [mm]: 570
- Number of pins: 4
-
Oxygen Sensor: Diagnostic Probe,
Thread pre- greased - Number of circuits: 4
- Fitting Position: after catalytic converter
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Engine Code: AUM
- Construction Year from: 09.2000
- Construction Year to: 05.2003
- Length [mm]: 800
- Technical Information Number: Universal 77015
- Manufacturer: FAE
- Construction Year from: 10.1997
- Construction Year to: 05.2004
- Engine Code: AGU
- Fitting Position: before catalytic converter
-
Oxygen Sensor: Planar probe,
Thread pre- greased, Heated - Number of pins: 4
- Cable Length [mm]: 720
-
Thread Size: M18x1,
5 - Switch Pressure [bar]: 4
- Connector Shape: oval
- Name: VA 368436
- Manufacturer: VALEO
- Engine Code: ARZ
- Construction Year from: 05.1999
- Construction Year to: 09.2000
- Transmission Type: Manual Transmission
- for OE number: 022906262BG
- Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 650
- Number of pins: 4
- Weight [g]: 189
- Gross Weight [g]: 222
- Manufacturer: DENSO
-
Name: DN DOX-
2000 - Quality class: Q
Oxygen Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Oxygen Sensor
Additional information: "Tootja: DENSO
POLO SEDAN, 09.02-
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
POLO SEDAN, 09.02-
(kvaliteediklass: Q)"
-
Engine Code: AUM,
ARZ, AGU, AWD, AWW - Oxygen Sensor: Heated
-
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 4
-
Cable Length [mm]: 1,
760 - Weight [kg]: 0.155
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: AGU
-
Vehicle Identification Number (VIN) from: 1J-
W- 000 001 -
Line insulation design: with silicone-
coated woven- fibre insulation - Weight [kg]: 0.139
- Number of circuits: 4
- Connector Shape: D Shape
- Socket colour: black
- Number of pins: 4
- for OE number: 030 906 265 BS
- Cable Length [mm]: 600
-
Thread Size: M18 x 1,
5 - Length [mm]: 720
- Number of connectors: 4
-
Oxygen Sensor: Regulating Probe,
Thread pre- greased - Fitting Position: before catalytic converter
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: ARZ
- Construction Year from: 05.1999
- Construction Year to: 09.2000
- Transmission Type: Manual Transmission
-
Exhaust System: for pre-
catalytic converter - for OE number: 06A906262Q
- Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
-
Cable Length [mm]: 1,
100 - Number of pins: 4
- Weight [g]: 117
- Gross Weight [g]: 150
- Manufacturer: DENSO
- Name: Lambda sensor
- Quality class: Q
Oxygen Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Oxygen Sensor
Additional information: "Tootja: DENSO
SHARAN (7M8, 7M9, 7M
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
SHARAN (7M8, 7M9, 7M
(kvaliteediklass: Q)"
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Engine Code: AUM
- Construction Year from: 09.2000
- Construction Year to: 05.2003
-
Length [mm]: 1,
500 - Number of pins: 6
- Manufacturer: FAE
-
Oxygen Sensor: Regulating Probe,
Planar probe - Fitting Position: before catalytic converter
- Engine Code: ARZ
- Cable Length [mm]: 750
- Number of pins: 4
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6PA358066401
Brief Information: *** HELLA Electronics OE competence for over 60 years.
-
Engine Code: ARZ,
AUM -
Construction Year from: 05.1999,
09.2000 -
Construction Year to: 09.2000,
05.2003 -
Oxygen Sensor: Regulating Probe,
Diagnostic Probe - Block Separation:
- Number of circuits: 4
-
Overall Length [mm]: 1,
760 - Available as universal article as well, see article no.: 0258986615
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: BOS
Fitting Position: before catalytic converter, after catalytic converter
- Construction Year to: 05.2003
- Engine Code: AGU
-
Line insulation design: with silicone-
coated woven- fibre insulation - Socket colour: black
- Number of circuits: 4
- Cable Length [mm]: 540
- Connector Shape: D Shape
- Weight [kg]: 0.166
- for OE number: 06A 906 265 AP
-
Thread Size: M18 x 1,
5 - Length [mm]: 680
- Number of pins: 4
-
Oxygen Sensor: Regulating Probe,
Thread pre- greased - Fitting Position: before catalytic converter
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year to: 05.2003
- Engine Code: AGU
- Connector Shape: D Shape
- for OE number: 03D 906 265 B
- Weight [kg]: 0.15
-
Thread Size: M18 x 1,
5 - Socket colour: black
- Number of circuits: 4
- Length [mm]: 650
- Number of pins: 4
- Number of connectors: 4
-
Oxygen Sensor: Regulating Probe,
Thread pre- greased - Fitting Position: before catalytic converter
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Oxygen Sensor: Regulating Probe
-
Length [mm]: 1,
700 - Number of pins: 4
- Supplementary Article/Info 2: with mounting manual
- Manufacturer: FAE
- Fitting Position: before catalytic converter
- Rated Voltage [V]: 12
- Number of pins: 6
- Connector Shape: oval
-
Cable Length [mm]: 1,
510 -
Overall Length [mm]: 1,
538 - Spanner Size: 22
- Thread Size: M 18
- Thread Pitch [mm]: 1.5
- Supplementary Article/Supplementary Info: with cable tie
-
Supplementary Article/Info 2: with plastic socket,
with heat shield pipe - Lubrication: with grease lubrication
- Full Set:
- Manufacturer: TOPRAN
Oxygen Sensor: Regulating Probe, Broadband oxygen sensor, Heated, Planar probe General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: before catalytic converter
- Engine Code: ARZ
- Oxygen Sensor: Regulating Probe
-
Cable Length [mm]: 1,
750 - Number of pins: 4
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6PA358066391
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Engine Code: ARZ
- Construction Year from: 05.1999
- Construction Year to: 09.2000
-
Line insulation design: with silicone-
coated woven- fibre insulation -
Length [mm]: 1,
100 - Number of pins: 4
- Number of circuits: 4
- Connector Shape: D Shape
- Socket colour: black
- Weight [kg]: 0.173
- for OE number: 06F 906 262 D
- Cable Length [mm]: 925
-
Thread Size: M18 x 1,
5 - Housing Colour: black
-
Version: ZR-
PLANAR - Manufacturer: VEMO
Oxygen Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased Fitting Position: before catalytic converter, after catalytic converter General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Oxygen Sensor: Heated
- Number of pins: 4
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Construction Year from: 05.1999
- Construction Year to: 05.2004
-
Engine Code: ARZ,
AUM, AWD -
Oxygen Sensor: Planar probe,
Thread pre- greased, Heated - Number of pins: 4
-
Cable Length [mm]: 1,
800 -
Thread Size: M18x1,
5 - Switch Pressure [bar]: 4
- Connector Shape: oval
- Manufacturer: VALEO
Fitting Position: before catalytic converter, after catalytic converter
- Engine Code: AGU
- Construction Year from: 10.1997
- Construction Year to: 05.2003
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Number of circuits: 4
- Overall Length [mm]: 720
- Available as universal article as well, see article no.: 0258986505
-
Recommended change interval [km]: 160,
000 - Name: LAMBDA ANDUR
- Manufacturer: BOS
- Engine Code: ARZ
- Construction Year from: 05.1999
- Construction Year to: 09.2000
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Number of circuits: 4
- Overall Length [mm]: 760
- Available as universal article as well, see article no.: 0258986615
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: BOS
- Number of circuits: 5
-
Length [mm]: 1,
510 - Conductor Number: 5
-
Cable Length [mm]: 1,
510 - Oxygen Sensor: Heated
- Name: LAMBDA ANDUR
- Manufacturer: MAG
- Construction Year from: 05.1999
- Construction Year to: 09.2000
- Engine Code: ARZ
- Fitting Position: before catalytic converter
-
Oxygen Sensor: Planar probe,
Thread pre- greased, Heated - Number of pins: 4
- Cable Length [mm]: 720
-
Thread Size: M18x1,
5 - Switch Pressure [bar]: 4
- Connector Shape: oval
- Manufacturer: VALEO
- Name: VA 368041
- Construction Year from: 10.1997
- Construction Year to: 05.2004
- Engine Code: AGU
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Length [mm]: 730
- Number of circuits: 4
- Manufacturer: VDO
- Engine Code: AUM
-
Oxygen Sensor: Regulating Probe,
Heated - Fitting Position: before catalytic converter
- Number of circuits: 5
-
Length [mm]: 1,
500 - Name: LAMBDA ANDUR
- Manufacturer: MAX
-
Oxygen Sensor: Regulating Probe,
Oxygen Sensor, Heated - Fitting Position: before catalytic converter
- Quantity: 1
- Engine Code: AUM
- Cable Length [mm]: 950
- Name: LAMBDA ANDUR
- Manufacturer: DLP
- Oxygen Sensor: Oxygen Sensor
- Voltage [V]: 12
- Colour: red
- Guarantee: 3 years guarantee
- Number of circuits: 5
- Weight [kg]: 0.15
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Name: CE 09SKV905
- Manufacturer: ESEN SKV
- Engine Code: ARZ
- Construction Year from: 05.1999
- Construction Year to: 09.2000
- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Length [mm]: 650
- Number of circuits: 4
- Manufacturer: VDO
- Construction Year from: 09.2000
- Construction Year to: 05.2003
- Engine Code: AUM
-
Oxygen Sensor: Regulating Probe,
Unheated - Fitting Position: Exhaust Manifold
- Number of pins: 5
- Cable Length [mm]: 600
- for article number: 81528E
- Quality: OE EQUIVALENT
- for OE number: 06A906262AE
- Manufacturer: MEAT&DORIA
- Engine Code: AUM
-
Vehicle Identification Number (VIN) from: 1J-
W- 000 001 -
Oxygen Sensor: Diagnostic Probe,
Heated - Voltage [V]: 12
- Conductor Number: 4
- Cable Length [mm]: 950
- Manufacturer: PIERBURG
- Construction Year from: 09.2000
- Construction Year to: 05.2003
- Engine Code: AUM
- Oxygen Sensor: Oxygen Sensor
- Voltage [V]: 12
-
Length [mm]: 1,
510 - Guarantee: 3 years guarantee
- Number of circuits: 5
- Weight [kg]: 0.22
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Name: CE 09SKV852
- Manufacturer: ESEN SKV
-
Engine Code: ARZ,
AUM -
Oxygen Sensor: Regulating Probe,
Diagnostic Probe, Heated - Block Separation:
- Fitting Position: before catalytic converter
- Number of circuits: 5
- Length [mm]: 800
- Name: Lambda andur
- Manufacturer: MAX
- Oxygen Sensor: Oxygen Sensor
- Voltage [V]: 12
- Length [mm]: 520
- Guarantee: 3 years guarantee
- Number of circuits: 5
- Weight [kg]: 0.15
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV868
-
Oxygen Sensor: Regulating Probe,
Oxygen Sensor - Construction Year from: 09.2000
- Construction Year to: 05.2003
- Engine Code: AUM
- Voltage [V]: 12
- Length [mm]: 630
- Guarantee: 3 years guarantee
- Number of circuits: 5
- Weight [kg]: 0.16
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV858
- Construction Year from: 09.2000
- Construction Year to: 05.2003
- Engine Code: AUM
- Oxygen Sensor: Oxygen Sensor
- Voltage [V]: 12
-
Length [mm]: 1,
470 - Guarantee: 3 years guarantee
- Number of circuits: 5
- Weight [kg]: 0.22
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Name: CE 09SKV860
- Manufacturer: ESEN SKV
- Engine Code: AUM
- Construction Year from: 09.2000
- Construction Year to: 05.2003
- Oxygen Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Number of circuits: 5
- Overall Length [mm]: 760
-
Recommended change interval [km]: 160,
000 - Name: LAMBDA ANDUR
- Manufacturer: BOS
- Oxygen Sensor: Oxygen Sensor
- Guarantee: 3 years guarantee
- Weight [kg]: 0.16
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV911
- Oxygen Sensor: Heated
- Conductor Number: 5
- General Information: lambda probe; 5 wire
- Manufacturer: VIKA
-
Oxygen Sensor: Regulating Probe,
Broadband oxygen sensor - Fitting Position: before catalytic converter
- Engine Code: ARZ
- Cable Length [mm]: 800
- Number of pins: 6
- Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead - Name: Lambda andur
- Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.
-
Oxygen Sensor: Regulating Probe,
Oxygen Sensor - Construction Year from: 09.2000
- Construction Year to: 05.2003
- Exhaust System: before catalytic converter
- Voltage [V]: 12
- Guarantee: 3 years guarantee
- Weight [kg]: 0.16
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV907
- Oxygen Sensor: Oxygen Sensor
- Guarantee: 3 years guarantee
- Weight [kg]: 0.15
- Always compare old and new part (in particular OE No.):
- Technical Information: Universal
- Name: CE 09SKV915
- Manufacturer: ESEN SKV
- Fitting Position: before catalytic converter
- Required quantity: 1
- Engine Code: AUM
- Oxygen Sensor: Regulating Probe
-
Cable Length [mm]: 1,
500 - Number of pins: 6
- Exhaust System: before catalytic converter
- Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead - Manufacturer: HELLA
- Name: HE 6PA009166821
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Fitting Position: Front
- Quantity: 1
- Engine Code: AUM
-
Line insulation design: with silicone-
coated woven- fibre insulation - Conductor Number: 5
-
Thread Size: M18 x 1,
5 - Connector Shape: D Shape
-
Cable Length [mm]: 1,
510 - Supplementary Article/Supplementary Info: with cable tie
-
Oxygen Sensor: Broadband oxygen sensor,
Thread pre- greased - Number of circuits: 5
- Weight [kg]: 0.155
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: AUM
-
Oxygen Sensor: Regulating Probe,
Heated - Voltage [V]: 12
- Conductor Number: 5
- Cable Length [mm]: 900
- Manufacturer: PIERBURG
- Oxygen Sensor: Unheated
- Number of pins: 5
- Cable Length [mm]: 600
- for article number: 81528
- for OE number: 1K0998262H
- Manufacturer: MEAT&DORIA
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks