Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: Rear Axle
- Transmission Type: Manual Transmission
- Braking System: not for vehicles with reinforced brakes
- Inner brake drum diameter [mm]: 180
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Inner brake drum height [mm]: 39
- Manufacturer: DELLO AUTOMEGA
- Fitting Position: Rear Axle
- Braking System: for vehicles with reinforced brakes
- Rim Hole Number: 4
- Bolt Hole Circle Ø [mm]: 100
- Inner brake drum diameter [mm]: 200
- Manufacturer: DELLO AUTOMEGA
- Fitting Position: Rear Axle
- Centering Diameter [mm]: 39.8
- Inner brake drum height [mm]: 49.5
- Total brake drum height [mm]: 81
- Inner brake drum diameter [mm]: 200
- max. brake drum reboring dimension [mm]: 201
- Rim Hole Number: 4
- Manufacturer: LPR
- Fitting Position: Rear Axle
- Outer brake drum diameter [mm]: 240
- Bolt Hole Circle Ø [mm]: 100
- Centering Diameter [mm]: 39.8
- max. brake drum reboring dimension [mm]: 201
- Total brake drum height [mm]: 81
- Inner brake drum height [mm]: 50
- Name: PIDURITRUMMEL
- Manufacturer: MAX
Supplementary Article/Info 2: with wheel hub, without wheel bearing, without wheel studs
- Transmission Type: Manual Transmission
- Braking System: not for vehicles with reinforced brakes
- Rim Hole Number: 4
- Width [mm]: 30
- Thickness [mm]: 74.5
- Outer Diameter [mm]: 211.5
- Bolt Hole Circle Ø [mm]: 100
- Inner brake drum diameter [mm]: 180
- Fitting Position: Rear Axle
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Inner brake drum height [mm]: 50.5
- Number of Holes: 4
-
Thread Size: M 12x1,
5 - max. brake drum reboring dimension [mm]: 201.5
- Support plate diameter [mm]: 50.3
-
Supplementary Article/Info 2: without ABS sensor ring,
without wheel bearing - Inner Diameter 2 [mm]: 39.9
- Total brake drum height [mm]: 81
- Drum diameter [mm]: 200
- Outer brake drum diameter [mm]: 240
- Bolt Hole Circle Ø [mm]: 100
- Fitting Position: Rear Axle
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Transmission Type: Manual Transmission
- Braking System: not for vehicles with reinforced brakes
- Rim Hole Number: 4
- Width [mm]: 30
- Thickness [mm]: 74.5
- Outer Diameter [mm]: 211.5
- Bolt Hole Circle Ø [mm]: 100
- Inner brake drum diameter [mm]: 180
- Fitting Position: Rear Axle
- Name: SW 32 90 2123
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Braking/Driving Dynamics: for vehicles with ABS
- Fitting Position: Rear Axle
- Outer brake drum diameter [mm]: 240
- Inner brake drum diameter [mm]: 200
- max. brake drum reboring dimension [mm]: 201
- Inner brake drum height [mm]: 50
- Total brake drum height [mm]: 82.2
- Centering Diameter [mm]: 50.3
- Bolt Hole Circle Ø [mm]: 100
- Number of Holes: 4
- Required quantity: 2
- Name: PIDURITRUMMEL
- Manufacturer: MEY
- Rim Hole Number: 4
- Thickness [mm]: 40
- Bolt Hole Circle Ø [mm]: 100
- Inner brake drum diameter [mm]: 200
- Fitting Position: Rear Axle
- Weight [kg]: 8.7
- Supplementary Article/Info 2: without wheel bearing
- Manufacturer: FEBI BILSTEIN
- Quantity per packing unit: 2
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year to: 01.1983
- Fitting Position: Rear Axle
- Inner brake drum diameter [mm]: 200
- Outer brake drum diameter [mm]: 239.3
- Inner brake drum height [mm]: 49
- Total brake drum height [mm]: 81.5
- Number of Holes: 4
- Centering Diameter [mm]: 50.2
- Bolt Hole Circle Ø [mm]: 100
- Name: Brake drum
- Quality class: PJ
Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Replace in pairs only:
- Registration Type: ECE approved
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Fitting Position: Rear Axle
- Inner brake drum diameter [mm]: 200
- Inner brake drum height [mm]: 50
- Bolt Hole Circle Ø [mm]: 100
- Total brake drum height [mm]: 81
- Outer brake drum diameter [mm]: 240
- Number of Holes: 4
- Centering Diameter [mm]: 39.8
- Manufacturer: DELPHI LOCKHEED HAMULCE
- Fitting Position: Rear Axle
- Inner brake drum diameter [mm]: 200
- Inner brake drum height [mm]: 50
- Total brake drum height [mm]: 82
- Rim Hole Number: 4
- Wheel Hub Diameter [mm]: 40
- Outer brake drum diameter [mm]: 240
- Weight [kg]: 5.8
- Bolt Hole Circle Ø [mm]: 100
- Wheel Hub Diameter 2 [mm]: 50
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: ABS
- Fitting Position: Rear Axle
- Diameter [mm]: 200
- Inner brake drum height [mm]: 50
-
Hole Arrangement/Number: 4/
4 - Lisainfo: Brake drum
- Additional information: Brake drum
- Fitting Position: Rear Axle
- Outer brake drum diameter [mm]: 240
- Total brake drum height [mm]: 81
- Inner brake drum diameter [mm]: 200
- Inner brake drum height [mm]: 50
- max. brake drum reboring dimension [mm]: 201
-
Hole Arrangement/Number: 04/
04 - Bolt Hole Circle Ø [mm]: 100
- Centering Diameter [mm]: 39.8
- Wheel Bolt Bore Diameter [mm]: 12
- Packaging length [cm]: 26.3
- Packaging width [cm]: 25.9
- Packaging height [cm]: 11.1
- Weight [kg]: 5.5
- Name: PIDURITRUMMEL
- Manufacturer: TEX
Supplementary Article/Info 2: with wheel hub, without wheel bearing, without wheel studs
- Fitting Position: Rear Axle
- Quantity per packing unit: 2
-
Supplementary Article/Info 2: without wheel bearing,
without ABS sensor ring - Inner brake drum diameter [mm]: 200
- max. brake drum reboring dimension [mm]: 201
- Inner brake drum height [mm]: 50
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
-
Thread Size: M12x1,
5 - Total brake drum height [mm]: 81.3
- Outer brake drum diameter [mm]: 240
- Support plate diameter [mm]: 50.3
- Inner Diameter 2 [mm]: 39.9
-
Test Mark: E1 90R-
02D0955/ 0094 - MAPP code available:
- Name: Piduritrummel
- Manufacturer: ATE
- Fitting Position: Rear Axle
- Inner brake drum diameter [mm]: 200
- Outer brake drum diameter [mm]: 239.3
- Inner brake drum height [mm]: 49
- Total brake drum height [mm]: 81.5
- Bolt Hole Circle Ø [mm]: 100
- Number of Holes: 4
- Centering Diameter [mm]: 50.2
- Manufacturer: BOSCH
- Fitting Position: Rear Axle
- Quantity per packing unit: 2
-
Supplementary Article/Info 2: with wheel bearing,
without ABS sensor ring - Inner brake drum diameter [mm]: 200
- max. brake drum reboring dimension [mm]: 201
- Inner brake drum height [mm]: 50
- Number of Holes: 4
- Bolt Hole Circle Ø [mm]: 100
-
Thread Size: M12x1,
5 - Total brake drum height [mm]: 81.3
- Outer brake drum diameter [mm]: 240
- Support plate diameter [mm]: 50.3
- Inner Diameter 2 [mm]: 39.9
-
Test Mark: E1 90R-
02D0955/ 0094 - MAPP code available:
- Manufacturer: ATE
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks