• Engine Code: YP
• Manufacturer: ENERGY

• Vehicle Identification Number (VIN) from: 32-B-100 001
• for OE number: 026 121 005 A
• Water Pump Type: for V-ribbed belt use
• Manufacturer: KAMOKA

• Diameter 2 [mm]: 115
• Length [mm]: 180
• Housing Type: without housing
• Supplementary Article/Supplementary Info: without accessories
• Supplementary Article/Info 2: with water pump seal ring
• Diameter 1 [mm]: 110
• Operating Mode: Mechanical
• Heating/Cooling: Metal impeller
• Weight [kg]: 1.048
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Housing Type: without housing
• Manufacturer: DENCKERMANN FILTRY

Manufacturer: JPN

• Vehicle Identification Number (VIN) from: 32B100001
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: JP GROUP
• Lisainfo: Water pump with seals
• Additional information: Water pump with seals

• Supplementary Article/Supplementary Info: with gasket/seal
• Name: VEEPUMP
• Manufacturer: MAX

• Vehicle Identification Number (VIN) from: 32B100001
• Housing Type: without housing
• Operating Mode: Mechanical
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: without lid
• Water Pump Type: for V-ribbed belt use
• Manufacturer: DRIVE

• Vehicle Identification Number (VIN) from: 32B100001
• Housing Type: without housing
• Operating Mode: Mechanical
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: without lid
• Number of blades/vanes: 6
• Impeller Diameter [mm]: 58.65
• Water Pump Type: for V-ribbed belt use
• Water pump impeller material: Metal
• Name: VEEPUMP
• Manufacturer: GRA

• Water pump impeller material: Metal
• Seal Material: Paper
• Material: Cast Aluminium
• Number of blades/vanes: 6
• Weight [kg]: 0.787
• Supplementary Article/Supplementary Info: with seal rings
• Observe service information:
• Name: VEEPUMP
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Weight [kg]: 1.001
• Required quantity: 1
• General Information: water pump
• Manufacturer: VIKA

• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: DELLO AUTOMEGA

• Vehicle Identification Number (VIN) from: 32B100001
• Overall Height [mm]: 107
• Manufacturer: ASHIKA

• new version:
• Water pump impeller material: Metal
• Seal Material: Paper
• Material: Cast Aluminium
• Number of blades/vanes: 6
• Weight [kg]: 0.787
• Supplementary Article/Supplementary Info: with seal rings
• Observe service information:
• Name: SW 32 15 0001
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• New Part:
• Housing Type: without housing
• Weight [kg]: 1.01
• Manufacturer: DOLZ

• Engine Code: YP
• Manufacturer: MAGNETI MARELLI
• Name: MM WPQ1161

• New Part:
• Pulleys: without belt pulley
• Housing Type: without housing
• Weight [kg]: 0.87
• reinforced version:
• Manufacturer: DOLZ
• Name: DO A151RS

• Supplementary Article/Supplementary Info: with gasket/seal
• Housing Type: without housing
• for shaft diameter [mm]: 30
• New part without deposit:
• Article number of the recommended special tool: 999 990 0002
• Name: VEEPUMP
• Manufacturer: MEY
• Lisainfo: 1130120001
• Additional information: 1130120001

General Information: MEYLE provides a 100,000-mile guarantee for all MEYLE water pumps and a 4-year warranty for MEYLE-HD water pumps. The 100,00 mile warranty requires the cooling system to be flushed before installation.

• Vehicle Identification Number (VIN) to: 32-E-100001
• Housing Type: with housing, Metal Housing
• Manufacturer: BGA

• Vehicle Identification Number (VIN) from: ******32*B*100000
• Water pump impeller material: Plastic
• Seal Material: Paper
• Material: Cast Aluminium
• Number of blades/vanes: 6
• Weight [kg]: 0.839
• Supplementary Article/Supplementary Info: with gasket/seal
• Observe service information:
• Name: VEEPUMP
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pulleys: without belt pulley
• Housing Type: without housing
• Packaging length [cm]: 17.8
• Packaging width [cm]: 11.4
• Packaging height [cm]: 11.4
• Weight [kg]: 0.76
• Manufacturer: AKSDASIS

• Vehicle Identification Number (VIN) from: 32-B-100 001
• Diameter 2 [mm]: 130
• Operating Mode: Mechanical
• Heating/Cooling: Plastic impeller
• Housing Type: without housing
• Supplementary Article/Info 2: with water pump seal ring
• Diameter 1 [mm]: 125
• Length [mm]: 185
• Weight [kg]: 1.168
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) from: 32B100001
• Housing Type: without housing
• Operating Mode: Mechanical
• Water Pump Type: for V-ribbed belt use
• Water pump impeller material: Aluminium
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: without cover
• for OE number: 026 121 005A
• Name: Water pump
• Quality class: PJ

Lisainfo: "Tootja: SRL
TRANSPORTER (T3)
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
TRANSPORTER (T3)
(kvaliteediklass: PJ)"

• Water Pump Type: for V-ribbed belt use
• Supplementary Article/Supplementary Info: with gasket/seal
• Housing Type: without housing
• Number of threaded holes: 3
• SVHC: No SVHC present!
• Name: VEEPUMP
• Manufacturer: INA
• Lisainfo: 538033910
• Additional information: 538033910

• Operating Mode: Mechanical
• Housing Type: single-part housing
• Supplementary Article/Supplementary Info: with gasket/seal
• Water pump impeller material: Metal
• for article number: P513
• Manufacturer: HEPU

• Pulleys: without belt pulley
• Housing Type: without housing
• reinforced version:
• Packaging length [cm]: 17.8
• Packaging width [cm]: 11.4
• Packaging height [cm]: 11.4
• Weight [kg]: 0.842
• Manufacturer: AKSDASIS

• Vehicle Identification Number (VIN) from: 32-E-100 001
• Engine Code: YP
• Operating Mode: Mechanical
• Water pump impeller material: Metal
• Impeller Diameter [mm]: 59.5
• Number of blades/vanes: 6
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with seal ring, without coolant regulator
• Manufacturer: PIERBURG

• Housing Type: with housing
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Housing Type: without housing
• Weight [kg]: 1.56
• Manufacturer: AKSDASIS

• Vehicle Identification Number (VIN) from: 32-B-100 001
• Housing Type: with housing
• Water Pump Type: for V-ribbed belt use
• Manufacturer: KAMOKA

• Pulleys: without belt pulley
• Supplementary Article/Info 2: without lid
• Supplementary Article/Supplementary Info: with gaskets/seals
• Manufacturer: VALEO
• Name: VA 506666

• Width [mm]: 18
• Number of Teeth: 121
• Surface: PTFE (Polytetrafluorethylene) coated
• Belts: with trapezoidal tooth profile
• Weight [kg]: 1.99
• for OE number: 051 198 119 S2
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 32B100001
• Weight [kg]: 0.857
• Packaging length [cm]: 13
• Packaging width [cm]: 13
• Packaging height [cm]: 16
• Supplementary Article/Supplementary Info: with gasket/seal
• Operating Mode: Mechanical
• Supplementary Article/Info 2: without lid
• Name: VEEPUMP
• Manufacturer: CON

• Vehicle Identification Number (VIN) from: 32B100001
• Housing Type: with housing
• Operating Mode: Mechanical
• Supplementary Article/Info 2: with lid, with seal ring
• Number of blades/vanes: 6
• Impeller Diameter [mm]: 58.65
• Water Pump Type: for V-ribbed belt use
• Water pump impeller material: Metal
• Name: VEEPUMP
• Manufacturer: GRA

• Vehicle Identification Number (VIN) from: 32-B-100 001
• Water Pump Type: for V-ribbed belt use
• Water pump impeller material: Sheet Steel
• Supplementary Article/Supplementary Info: with gaskets/seals
• Technical Information: SKF Aquamax
• Name: VEEPUMP
• Manufacturer: SKF
• Lisainfo: VKPC 81410 SKF
• Additional information: VKPC 81410 SKF

• New Part:
• Pulleys: without belt pulley
• Housing Type: with housing
• Height [mm]: 73.4
• Weight [kg]: 1.71
• reinforced version:
• Name: DO A161RS
• Manufacturer: DOLZ

• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Water pump impeller material: Plastic
• Seal Material: Rubber
• Hub Outer Diameter [mm]: 30
• Material: Cast Aluminium
• Number of blades/vanes: 6
• Weight [kg]: 1.568
• for OE number: 037 121 010 C
• Supplementary Article/Supplementary Info: with gaskets/seals
• Observe service information:
• Name: VEEPUMP
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle configuration line / variant: PV
• Weight [kg]: 2
• Manufacturer: DAYCO POMPY WODY

• Vehicle Identification Number (VIN) from: 32B100001
• Housing Type: with housing
• Operating Mode: Mechanical
• Supplementary Article/Info 2: with lid
• Water Pump Type: for V-ribbed belt use
• Manufacturer: DRIVE

• Supplementary Article/Supplementary Info: with gasket/seal
• Housing Type: with housing
• for shaft diameter [mm]: 30
• New part without deposit:
• Article number of the recommended special tool: 999 990 0002
• Name: VEEPUMP
• Manufacturer: MEY
• Lisainfo: 1130120008
• Additional information: 1130120008

General Information: MEYLE provides a 100,000-mile guarantee for all MEYLE water pumps and a 4-year warranty for MEYLE-HD water pumps. The 100,00 mile warranty requires the cooling system to be flushed before installation.

• Water pump impeller material: Plastic
• Seal Material: Rubber
• Hub Outer Diameter [mm]: 40
• Material: Cast Aluminium
• Number of blades/vanes: 6
• Weight [kg]: 1.597
• Supplementary Article/Supplementary Info: with gaskets/seals
• for OE number: 026 121 010 D
• Observe service information:
• Name: VEEPUMP
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Water pump impeller material: Plastic
• Seal Material: Rubber
• Hub Outer Diameter [mm]: 30
• Material: Cast Aluminium
• Number of blades/vanes: 6
• Weight [kg]: 1.568
• for OE number: 037 121 010 C
• Supplementary Article/Supplementary Info: with gaskets/seals
• Observe service information:
• Name: SW 32 15 0006
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) to: 32B100000
• Housing Type: with housing
• Operating Mode: Mechanical
• Supplementary Article/Info 2: with lid, with seal ring
• Number of blades/vanes: 6
• Impeller Diameter [mm]: 58.65
• Water Pump Type: for V-ribbed belt use
• Water pump impeller material: Metal
• Name: VEEPUMP
• Manufacturer: GRA

• Vehicle Identification Number (VIN) from: 32B100001
• Housing Type: with housing
• Operating Mode: Mechanical
• Water Pump Type: for V-ribbed belt use
• Water pump impeller material: Aluminium
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with cap, with seal ring
• Name: Water pump
• Quality class: PJ

Lisainfo: "Tootja: SRL
TRANSPORTER (T3)
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
TRANSPORTER (T3)
(kvaliteediklass: PJ)"

• Engine Code: YP
• Manufacturer: MAGNETI MARELLI

• Width [mm]: 18
• Number of Teeth: 121
• Surface: PTFE (Polytetrafluorethylene) coated
• Belts: with trapezoidal tooth profile
• Weight [kg]: 2.77
• for OE number: 051 198 119 S3
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Operating Mode: Mechanical
• Housing Type: two-part housing, with housing
• Water pump impeller material: Metal
• Supplementary Article/Supplementary Info: with seal rings
• Manufacturer: HEPU

• Housing Type: with housing
• SVHC: No SVHC present!
• Name: VEEPUMP
• Manufacturer: INA

• Vehicle Identification Number (VIN) from: 32B100001
• Weight [kg]: 1.66
• Packaging length [cm]: 20
• Packaging width [cm]: 15
• Packaging height [cm]: 22.5
• Supplementary Article/Supplementary Info: with gasket/seal
• Operating Mode: Mechanical
• Supplementary Article/Info 2: with seal ring, with lid
• Manufacturer: CONTITECH-POMPY WODY

• Pulleys: without belt pulley
• Housing Type: with housing
• Packaging length [cm]: 29.8
• Packaging width [cm]: 17.5
• Packaging height [cm]: 14.5
• Weight [kg]: 1.74
• Manufacturer: AKSDASIS

• Number of belts: 1
• Width [mm]: 18
• Number of Teeth: 121
• Pulleys contained: 1
• Alternatively:
• Manufacturer: HEPU ZESTAWY ROZRZĄDU

• Number of Teeth 1: 121
• Width 2 [mm]: 18
• Observe service information:
• SVHC: No SVHC present!
• Name: Veepump hammasrihmakomplekt
• Manufacturer: INA

• Pulleys: without belt pulley
• Housing Type: with housing
• reinforced version:
• Packaging length [cm]: 29.8
• Packaging width [cm]: 17.5
• Packaging height [cm]: 14.5
• Weight [kg]: 1.64

• Vehicle Identification Number (VIN) from: 32-B-100 001
• Water Pump Type: for V-ribbed belt use
• Number of bolts/screws: 8
• Water pump impeller material: Sheet Steel
• Housing Type: with housing
• Supplementary Article/Supplementary Info: with gaskets/seals
• Name: VEEPUMP
• Manufacturer: SKF

• Pulleys: without belt pulley
• Supplementary Article/Info 2: with lid
• Supplementary Article/Supplementary Info: with gaskets/seals
• reinforced version:
• Weight [kg]: 1.87
• Manufacturer: VALEO