• Vehicle Identification Number (VIN) to: 3B-X-600 000
• External Thread [mm]: M14x1,5
• Length [mm]: 16
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Vehicle Identification Number (VIN) to: 3B-X-600 000
• Length [mm]: 23.8
• External Thread Size: M14 x 1,5
• Quality/ Grade: 5.8
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Material: Steel
• Surface: Phosphatized
• Screw length below head [mm]: 16
• Weight [kg]: 0.031
• Supplementary Article/Info 2: without seal ring
• Observe service information:
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Lisainfo: 99 90 3272 SWA Pikkus (mm): 23,8 Väliskeere [mm]: M14 x 1,5 Additional information: 99 90 3272 SWA Pikkus (mm): 23,8 Väliskeere [mm]: M14 x 1,5

• Vehicle Identification Number (VIN) from: 3B-Y-000 001
• Length [mm]: 22
• External Thread [mm]: M14 x 1,5
• Material: Steel
• Bolt Head-/Nut Design: Male Hex
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk, kuvatakse 1tk hind
• Additional information: PAKENDIS 10 tk, kuvatakse 1tk hind

• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 20
• Thickness [mm]: 1.5
• Material: Copper
• Shape: A Shape
• DIN/ISO: 7603
• Alternative Repair Kit: 017.736, 505.550, 505.540
• Manufacturer: ELRING
• Lisainfo: 115.100 ELR
• Additional information: 115.100 ELR

• Engine Code: AFN
• Material: Copper
• Inner Diameter [mm]: 14
• Thickness [mm]: 1.5
• Outer Diameter [mm]: 20
• Weight [kg]: 0.007
• Fitting Position: Oil Sump
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: AFN
• Thickness [mm]: 1.5
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 20
• DIN/ISO: 7603 A/CU
• Material: Copper
• Weight [kg]: 0.002
• Observe service information:
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: AFN
• Thickness [mm]: 1.5
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 20
• DIN/ISO: 7603 A/CU
• Material: Copper
• Weight [kg]: 0.002
• Name: RONGASTIHEND, OLI ŽRAVOOLUKRUVI
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Outer Diameter [mm]: 20
• Inner Diameter [mm]: 14
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Vehicle Identification Number (VIN) to: 3B-X-600000
• Material: Copper
• Outer Diameter [mm]: 20
• Inner Diameter [mm]: 14
• Thickness [mm]: 1.5
• Shape: A Shape
• DIN/ISO: 7603
• Name: Rongastihend, oli „ravoolukruvi
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: AFN, AVG
• Block Separation:
• Construction Year from: 05.1998
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 20
• Thickness [mm]: 1.5
• Manufacturer: AJUSA

• Vehicle Identification Number (VIN) to: 3B-X-600 000
• Length [mm]: 23.8
• External Thread [mm]: M14 x 1,5
• Material: Steel
• Bolt Head-/Nut Design: Male Hex
• Supplementary Article/Info 2: without seal ring
• Thread Pitch [mm]: 1.5
• Fitting Position: engine sided
• Thread Size: M14 x 1,5
• Required quantity: 1
• Spanner Size: 19
• Thread Length [mm]: 17.5
• Surface: Phosphatized
• Weight [kg]: 0.032
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thread Size: M14x1,5
• Length [mm]: 17
• Additionally required articles (article numbers): 259.150.100
• Spanner Size: SW19
• Name: SULGURKRUVI, OLIVANN
• Manufacturer: FIS

• Vehicle Identification Number (VIN) from: 3B-Y-000001
• Bolt/Nut Version: Prevent-loss disc
• Thread Size: M 14
• Thread Length [mm]: 22
• Thread Pitch [mm]: 1.5
• Overall Length [mm]: 30
• Material: Steel
• Surface: Zink-nickel coated
• Bolt Head-/Nut Design: Male Hex
• Spanner Size: 19
• Name: Sulgurkruvi, olivann
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Thread Size: M14x1,5
• Length [mm]: 22
• Supplementary Article/Info 2: with seal ring
• Name: SULGURKRUVI, OLIVANN
• Manufacturer: FIS

• Vehicle Identification Number (VIN) to: 3B-X-600 000
• Length [mm]: 23.8
• External Thread Size: M14 x 1,5
• Quality/ Grade: 5.8
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Material: Steel
• Surface: Phosphatized
• Screw length below head [mm]: 16
• Supplementary Article/Info 2: without seal ring
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) to: 3B-X-600000
• Article number of recommended accessories: 104 474
• Thread Size: M 14
• Thread Pitch [mm]: 1.5
• Overall Length [mm]: 23.5
• Thread Length [mm]: 16
• Strength class: 5.8
• Material: Steel
• Bolt Head-/Nut Design: Male Hex
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Identification Number (VIN) from: 3B-Y-000 001
• Length [mm]: 30
• External Thread Size: M14 x 1,5
• Thread Length [mm]: 18
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Material: Steel
• Surface: Zinc-coated
• Screw length below head [mm]: 22
• Weight [kg]: 0.04
• Supplementary Article/Info 2: with seal ring
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) to: 3B-X-600 000
• Length [mm]: 23.8
• Thread Size: M14 x 1,5
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Supplementary Article/Info 2: with seal ring
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Vehicle Identification Number (VIN) from: 3B-Y-000 001
• Length [mm]: 22
• Thread Size: M14 x 1,50
• Manufacturer: 3RG

• Vehicle Identification Number (VIN) to: 3B-X-600 000
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 20
• Material: Copper
• Thickness [mm]: 1.5
• Packing Type: Blister Pack
• Manufacturer: CORTECO

• Vehicle Identification Number (VIN) to: 3B-X-600 000
• Length [mm]: 23.8
• External Thread Size: M14 x 1,5
• Quality/ Grade: 5.8
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Material: Steel
• Surface: Phosphatized
• Screw length below head [mm]: 16
• Weight [kg]: 0.031
• Supplementary Article/Info 2: without seal ring
• Name: SULGURKRUVI, OLIVANN
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: N 908 132 02
• Thread Size: M14 x 1,5
• Manufacturer: TRUCKTEC

• Vehicle Identification Number (VIN) to: 3B-X-600 000
• Length [mm]: 23.8
• Inner Diameter [mm]: 14.4
• Outer Diameter [mm]: 20
• External Thread Size: M14 x 1,5
• Quality/ Grade: 5.8
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Material: Steel
• Surface: Phosphatized
• Screw length below head [mm]: 16
• Weight [kg]: 0.033
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Name: SULGURKRUVI, OLIVANN
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: M14x1,5
• Length [mm]: 17
• Spanner Size: SW19
• Supplementary Article/Info 2: with seal ring

• Vehicle Identification Number (VIN) to: 3B-X-600 000
• Length [mm]: 24
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 20
• External Thread Size: M14 x 1,5
• Quality/ Grade: 5.8
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Material: Steel
• Surface: Zinc-coated, Phosphatized
• Screw length below head [mm]: 16
• Weight [kg]: 0.32
• Supplementary Article/Info 2: with seal ring
• Name: SULGURKRUVI, OLIVANN
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 3B-Y-000 001
• Length [mm]: 29.5
• External Thread Size: M14 x 1,5
• Thread Length [mm]: 17.5
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Material: Steel
• Surface: Zinc-coated
• Screw length below head [mm]: 22
• Weight [kg]: 0.04
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Name: SULGURKRUVI, OLIVANN
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 3B-Y-000 001
• Length [mm]: 29.5
• External Thread Size: M14 x 1,5
• Thread Length [mm]: 17.5
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Material: Steel
• Surface: Zinc-coated
• Screw length below head [mm]: 22
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) to: 3B-X-600 000
• Length [mm]: 23.8
• Inner Diameter [mm]: 14.4
• Outer Diameter [mm]: 20
• External Thread Size: M14 x 1,5
• Quality/ Grade: 5.8
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Material: Steel
• Surface: Zinc-coated, Phosphatized
• Screw length below head [mm]: 16
• Weight [kg]: 0.033
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 3B-Y-000 001
• Length [mm]: 29.5
• External Thread Size: M14 x 1,5
• Thread Length [mm]: 17.5
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Material: Steel
• Surface: Zinc-coated
• Screw length below head [mm]: 22
• Weight [kg]: 0.04
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Lisainfo: 32 91 5374 SWA Pikkus (mm): 29,5 Väliskeere [mm]: M14 x 1,5 Additional information: 32 91 5374 SWA Pikkus (mm): 29,5 Väliskeere [mm]: M14 x 1,5

• Vehicle Identification Number (VIN) to: 3B-X-600 000
• Thread Size: M14x1,5
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Name: —RUBA SPUSTU OLEJU AUDI A4 1.6 04-
• Manufacturer: DRM

• Vehicle Identification Number (VIN) to: 3B-X-600 000
• Material: Steel
• Thread Size: M14x1,5
• Length [mm]: 24
• Screw length below head [mm]: 16
• Bolt Head-/Nut Design: Male Hex
• Spanner Size: 19
• Seal Material: Copper
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 20
• Thickness [mm]: 1.5
• Packing Type: Bag
• Supplementary Article/Info 2: with seal ring
• Manufacturer: METZGER

• Vehicle Identification Number (VIN) from: 3B-Y-000 001
• Material: Steel
• Thread Size: M14x1,5
• Length [mm]: 30
• Screw length below head [mm]: 22
• Bolt Head-/Nut Design: Male Hex
• Spanner Size: 19
• Seal Material: Steel
• Alternative Repair Kit: 8030062
• Supplementary Article/Info 2: with seal ring
• Manufacturer: METZGER

• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 20
• Thickness [mm]: 1.5
• Shape: A Shape
• Material: Copper
• Alternatively:
• Name: Rongastihend, oli „ravoolukruvi
• Manufacturer: FIS

• Thread Size: M14x1,5x16
• Bolt Head-/Nut Design: Male Hex
• Spanner Size: 19 mm
• Alternative Repair Kit: 878.070
• Supplementary Article/Info 2: without seal ring
• Manufacturer: ELRING

• Vehicle Identification Number (VIN) from: 3B-Y-000 001
• External Thread [mm]: M14 x 1,5
• Required quantity: 1
• Bolt Head-/Nut Design: Hexagon Socket
• Thread Pitch [mm]: 1.5
• for OE number: N 016 027 6
• Fitting Position: engine sided
• Thread Size: M14 x 1,5
• Bolt/Nut Version: Flat Head
• Material: Steel
• Thread Length [mm]: 12
• Supplementary Article/Info 2: with seal ring
• Weight [kg]: 0.018
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) to: 3B-X-600 000
• Length [mm]: 16
• Thread Size: M 14 x 1,50
• Supplementary Article/Info 2: with seal ring
• Packing Type: Blister Pack
• Name: COU 220124S
• Manufacturer: CORTECO

• Vehicle Identification Number (VIN) from: 3B-Y-000 001
• External Thread [mm]: M14 x 1,5
• Supplementary Article/Info 2: with seal ring
• Length [mm]: 29.5
• Thread Size: M14 x 1,5
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Surface: Zink-nickel coated
• Bolt/Nut Version: Prevent-loss disc
• Thread Length [mm]: 22
• Required quantity: 1
• Material: Steel
• Thread Pitch [mm]: 1.5
• for OE number: N 908 132 02
• Fitting Position: engine sided
• Weight [kg]: 0.064
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) from: 3B-Y-000 001
• Length [mm]: 29.5
• Thread Size: M 14 x 1,50 x 22
• Spanner Size: 19
• Supplementary Article/Info 2: with seal ring
• Packing Type: Blister Pack
• Manufacturer: CORTECO
• Name: COU 220125S

• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 20
• Thickness [mm]: 1.5
• Shape: A Shape
• Material: Copper

• Vehicle Identification Number (VIN) from: 3B-Y-000 001
• Material: Steel
• Thread Size: M14x1,5
• Length [mm]: 30
• Screw length below head [mm]: 22
• Bolt Head-/Nut Design: Male Hex
• Spanner Size: 19
• Seal Material: Steel
• Packing Type: Box
• Quantity: 10
• Alternative Repair Kit: 8030043
• Supplementary Article/Info 2: with seal ring
• Manufacturer: METZGER