Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Base body material: Steel
- Surface: Rubberized
- Outer Diameter [mm]: 47
- Colour: black
- for OE number: 078103113E
- Manufacturer: DELLO AUTOMEGA
- Required quantity: 2
- Height [mm]: 10
- Outer Diameter 1 [mm]: 47
- Inner Diameter 1 [mm]: 32
- Fitting Position: Front
- Manufacturer: BGA
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Manufacturer: DELLO AUTOMEGA
- Additional information: 190017010 DELLO
- Lisainfo: 190017010 DELLO
-
Engine Code: AFB,
AKN - Fitting Position: frontal sided
-
Material: FPM
(fluoride rubber) - Inner Diameter 1 [mm]: 32
- Outer Diameter 1 [mm]: 47
- Height 1 [mm]: 10
- Swirl Type: Alternating Twist
- Dust Cover: with dust lip
- for OE number: 026103085D
-
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: COT
- Additional information: 12012709
- Lisainfo: 12012709
- Fitting Position: frontal sided
- Required quantity: 2
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Width [mm]: 10
- SVHC: No SVHC present!
- Manufacturer: INA
- Name: LU 413009310
- Required quantity: 2
- Fitting Position: frontal sided
-
Engine Code: AFB,
AKN - Block Separation:
-
Material: FPM
(fluoride rubber) - Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Radial Shaft Seal Design: A SL
- Swirl Type: Alternating Twist
-
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: REI
-
Lisainfo: 81-
19299- 10 -
Additional information: 81-
19299- 10
- Required quantity: 2
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Radial Shaft Seal Design: ASW
- Swirl Type: Alternating Twist
-
Material: FPM
(fluoride rubber)/ ACM (polyacrylate rubber) - Dust Cover: with dust lip
- Alternative Repair Kit: 325.156
- Manufacturer: ELRING
- Lisainfo: 325.155 ELR
- Additional information: 325.155 ELR
- Required quantity: 2
- Thickness [mm]: 10
- for OE number: 068 103 085 E
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Weight [kg]: 0.023
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Quantity: 2
- Thickness [mm]: 14.8
- Weight [kg]: 0.02
- General Information: end cap
- Manufacturer: VIKA
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
-
Material: FPM
(fluoride rubber)/ ACM (polyacrylate rubber) - Dust Cover: with dust lip
- Swirl Type: Alternating Twist
- Fitting Position: frontal sided
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Name: Sulgurkate,
nukkvoll - Manufacturer: DRM
Brief Information: Always compare old and new part (in particular OE No.)
- Required quantity: 2
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Radial Shaft Seal Design: ASW
- Swirl Type: Alternating Twist
-
Material: FPM
(fluoride rubber) - Dust Cover: with dust lip
- Alternative Repair Kit: 325.155
- Manufacturer: ELRING
Manufacturer: ELRING
- Thickness [mm]: 14.8
- Weight [kg]: 0.02
-
Name: SULGURKATE,
NUKKVOLL - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Thickness [mm]: 15
- Weight [kg]: 0.02
- Manufacturer: SWAG
- Name: SW 30 93 2255
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Axle beam
- General Information: shaft oil seal
- Manufacturer: BORSEHUNG
- Weight [kg]: 0.135
- Quantity: 10
- Packaging length [cm]: 6
- Packaging width [cm]: 6
- Packaging height [cm]: 1
- Manufacturer: FEBEST
- Required quantity: 2
-
Engine Code: AKN,
AFB - Block Separation:
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Swirl Type: Alternating Twist
-
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: AJU
- Outer Diameter [mm]: 47
- Thickness [mm]: 10
- Inner Diameter [mm]: 32
- Fitting Position: transmission sided
- Weight [kg]: 0.195
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Engine Code: AKN,
AFB - Block Separation:
- Fitting Position: Exhaust Side
- Length [mm]: 322
- Diameter [mm]: 56
- for OE number: 059 109 022BC
- Name: NUKKVOLL
- Manufacturer: FRE
-
Engine Code: AKN,
AFB - Block Separation:
- Fitting Position: Exhaust Side
- Length [mm]: 322
- Diameter [mm]: 56
- for OE number: 059 109 022BD
- Name: NUKKVOLL
- Manufacturer: FRE
-
Engine Code: AKN,
AFB - Block Separation:
- Fitting Position: Intake Side
- Length [mm]: 405
- Diameter [mm]: 56
- for OE number: 059 109 021BQ
- Name: NUKKVOLL
- Manufacturer: FRE
-
Engine Code: AKN,
AFB - Block Separation:
- Fitting Position: Intake Side
- Length [mm]: 405
- Diameter [mm]: 56
- for OE number: 059 109 021BP
- Name: NUKKVOLL
- Manufacturer: FRE
-
Engine Code: AKN,
AFB - Block Separation:
- Fitting Position: Intake Side
-
General Information: for cylinder 4-
6 - Name: NUKKVOLL
- Manufacturer: KS
-
Engine Code: AKN,
AFB - Block Separation:
- Fitting Position: Exhaust Side
-
General Information: for cylinder 4-
6 - Name: NUKKVOLL
- Manufacturer: KS
-
Engine Code: AKN,
AFB - Block Separation:
- Fitting Position: Exhaust Side
-
General Information: for cylinder 1-
3 - Name: NUKKVOLL
- Manufacturer: KS
-
Fitting Position: Intake Side,
for cylinder 1- 3 - Manufacturer: BGA
-
Fitting Position: Intake Side,
for cylinder 4- 6 - Manufacturer: BGA
- Fitting Position: Intake Side
- Manufacturer: BGA
-
Fitting Position: Exhaust Side,
for cylinder 1- 3 - SVHC: No SVHC present!
- Name: NUKKVOLL
- Manufacturer: INA
- Engine Code: AKN
-
Fitting Position: for cylinder 4-
6, Inlet - Material: Cast Iron
- Manufacturer: FEDERAL MOGUL
- Engine Code: AKN
-
Fitting Position: for cylinder 1-
3, Inlet - Material: Cast Iron
- Manufacturer: FEDERAL MOGUL
- Engine Code: AKN
-
Fitting Position: for cylinder 1-
3 - Material: Cast Steel
- Valve type: for inlet valves
-
Additionally required articles (article numbers): R159S/
BFS127S - Manufacturer: FAI
-
Fitting Position: Exhaust Side,
for cylinder 4- 6 - SVHC: No SVHC present!
- Name: NUKKVOLL
- Manufacturer: INA
-
Fitting Position: Exhaust Side,
for cylinder 1- 3 - Weight [kg]: 1.99
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Intake Side,
for cylinder 1- 3 - SVHC: No SVHC present!
- Name: NUKKVOLL
- Manufacturer: INA
-
Fitting Position: Intake Side,
for cylinder 4- 6 - SVHC: No SVHC present!
- Manufacturer: INA
-
Fitting Position: Intake Side,
for cylinder 4- 6 - Weight [kg]: 2.43
- for OE number: 059 109 021 BQ
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
for OE number: 059109021BQ,
059109021P -
Fitting Position: Exhaust Side,
Driver side - Overall Length [mm]: 404
- Manufacturer: AMC
- SVHC: No SVHC present!
- Name: NUKKVOLLIKOMPLEKT
- Manufacturer: INA