• Control/Trailing Arm Type: Control Arm
• Lisainfo: FORD, SEAT, VW
• Additional information: FORD, SEAT, VW

• Vehicle Identification Number (VIN) from: 70-M-083 343, 70-T-200 001
• Vehicle Identification Number (VIN) to: 70-SX140 000
• Block Separation:
• Fitting Position: Lower Front Axle, Rear
• Manufacturer: JP-GROUP
• Lisainfo: Rubber mount for wishbone, front
• Additional information: Rubber mount for wishbone, front

• Fitting Position: Front Axle
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 39
• Thickness [mm]: 60
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) to: 70-T-199 000
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 38
• Thickness [mm]: 60
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Rear, Upper Front Axle
• Vehicle Identification Number (VIN) to: 70-T-199 000
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Manufacturer: DELLO AUTOMEGA

• Vehicle Identification Number (VIN) to: 70-T-199 000
• Fitting Position: Lower Front Axle, Front
• Manufacturer: JP-GROUP
• Lisainfo: Rubber mount for wishbone, front
• Additional information: Rubber mount for wishbone, front

• Fitting Position: Upper Front Axle, Rear
• Lisainfo: Rubber mount for wishbone, rear
• Additional information: Rubber mount for wishbone, rear

• Fitting Position: Front Axle, Centre
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Weight [kg]: 0.14
• Name: DY 37-22814
• Manufacturer: DYS

• Fitting Position: Lower, Front Axle, both sides
• Outer Diameter 1 [mm]: 35
• Outer Diameter 2 [mm]: 38
• Height [mm]: 60
• Manufacturer: KAMOKA

• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
VW TRANSPOR.T4 9/90-
(kvaliteediklass: PJ)"

• Vehicle Identification Number (VIN) to: 70-T199999
• Control/Trailing Arm Type: Control Arm
• Fitting Position: Front, Lower Front Axle
• Axle alignment required after fitting:
• Weight [kg]: 0.121
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Control/Trailing Arm Type: Control Arm
• Fitting Position: Rear, Upper Front Axle
• Axle alignment required after fitting:
• paired article number: V10-1376
• Weight [kg]: 0.154
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Upper Front Axle, Front
• Lisainfo: Rubber mount for wishbone, front
• Additional information: Rubber mount for wishbone, front

• Fitting Position: Front Axle, Lower, Front
• Vehicle Identification Number (VIN) to: 70T 199 999
• Inner Diameter 1 [mm]: 14
• Outer Diameter 1 [mm]: 38
• Thickness 1 [mm]: 60
• Manufacturer: DELPHI

• Fitting Position: Front Axle, Upper, both sides, Front
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Name: Puks - K„„ndmik VW P. T4 GàRNE
• Manufacturer: MAX

• Fitting Position: Front
• General Information: wishbone arm; front
• Manufacturer: VIKA

• Fitting Position: Front Axle, Upper, both sides, Rear
• Name: Puks - K„„ndmik VW P. T4 GàRNE
• Manufacturer: MAX

• Fitting Position: Front Axle, Upper, Front
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 39
• Thickness 1 [mm]: 60
• Manufacturer: DELPHI
• Name: DE TD499W

• Vehicle Identification Number (VIN) to: 70T19900
• Fitting Position: Front Axle, Centre
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Weight [kg]: 0.11
• Name: DY 37-04060-6
• Manufacturer: DYS

• Fitting Position: Front Axle, both sides, Front
• Vehicle Identification Number (VIN) to: 70...T...199999
• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 13.5
• Outer Diameter [mm]: 38
• Width [mm]: 60
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 829037710

• Fitting Position: Upper, Front, Front Axle both sides
• Required quantity: 2
• paired article number: VKDS 331031
• Height [mm]: 60
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40
• Name: SK VKDS331031
• Manufacturer: SKF

• Fitting Position: Upper, Rear, Front Axle
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 35
• Weight [kg]: 0.13
• Manufacturer: CORTECO
• Name: COC 600457

• Fitting Position: Front Axle, Rear, Upper
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 35
• Thickness 1 [mm]: 60
• Manufacturer: DELPHI
• Name: DE TD525W

• Fitting Position: Front, Lower, Front Axle Left, Front Axle Right
• Height [mm]: 60
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 35
• Supplementary Article/Supplementary Info: without holder
• Required quantity: 2
• replacement in pairs recommended:
• Name: Puks - K„„ndmik VW P. T4 DOLNE
• Manufacturer: MEY

• Fitting Position: Lower
• General Information: bonded rubber bush
• Manufacturer: VIKA

• Fitting Position: Front Axle, Rear
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Lower
• General Information: bonded rubber bush
• Manufacturer: VIKA

• Vehicle Identification Number (VIN) to: 70-T-199 999
• Fitting Position: Lower, Front, Front Axle
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 14.2
• Outer Diameter [mm]: 38
• Weight [kg]: 0.11
• Manufacturer: CORTECO
• Name: COC 600458

• Fitting Position: Upper, Front, Front Axle
• Inner Diameter [mm]: 12.3
• Outer Diameter [mm]: 38
• Weight [kg]: 0.15
• Manufacturer: CORTECO
• Name: COC 21652950

• Axle alignment required after fitting:
• paired article number: V10-1377
• Fitting Position: both sides, Front, Upper Front Axle
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.149
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle, Lower, Left, Right, Front
• Name: Puks
• Manufacturer: TED

• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40
• Length [mm]: 60
• paired article number: 270566
• Weight [kg]: 0.14
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

Fitting Position: in front of axle, Front Axle Left, Front Axle Right, Upper

• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 35.3
• Length [mm]: 60
• paired article number: 270568
• Weight [kg]: 0.13
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

Fitting Position: behind the axle, Front Axle Left, Front Axle Right, Upper

• Fitting Position: Front Axle, Upper, Rear
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 35
• Height [mm]: 60
• Name: ALT 80965AL
• Manufacturer: ALTE AUTOMOTIVE

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
VW TRANSPOR.T4 9/90-
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
VW TRANSPOR.T4 9/90-
(kvaliteediklass: PJ)"

• Vehicle Identification Number (VIN) from: 70-T-200 001
• Fitting Position: Lower Front Axle, Front
• Lisainfo: Rubber mount for wishbone, front, lower
• Additional information: Rubber mount for wishbone, front, lower

• Fitting Position: Rear Axle both sides, inner, Lower, Rear Axle
• Required quantity: 2
• Axle alignment required after fitting:
• Weight [kg]: 0.252
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle, Front
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Manufacturer: DELLO AUTOMEGA

• Vehicle Identification Number (VIN) to: 70-T-199 999
• Quantity per axle: 2
• Fitting Position: Front Axle, Lower, Front, inner, both sides
• Name: Puks - K„„ndmik VW P. T4 DOLNE
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear, Upper, Front Axle both sides
• Required quantity: 2
• paired article number: VKDS 331032
• Height [mm]: 60.2
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 35
• Name: SK VKDS331032
• Manufacturer: SKF

• Fitting Position: Front Axle, Upper, Front
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 40
• Height [mm]: 60
• Name: ALT 80985AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: outer, Upper, Front Axle Left, Front Axle Right
• Height [mm]: 60
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 35
• Supplementary Article/Supplementary Info: without holder
• Required quantity: 2
• replacement in pairs recommended:
• Name: Puks - K„„ndmik VW P. T4 GàRNE
• Manufacturer: MEY

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
VW TRANSPOR.T4 9/90-
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
VW TRANSPOR.T4 9/90-
(kvaliteediklass: PJ)"

• Vehicle Identification Number (VIN) from: 70-T-200001
• Fitting Position: Front Axle, Lower, both sides, Front
• Mounting Type: Rubber-Metal Mount
• Name: Puks - K„„ndmik VW P. T4 DOLNE
• Manufacturer: MAX

• Fitting Position: Front Axle, Upper, both sides, Rear
• Quantity per axle: 2
• Name: Puks - K„„ndmik VW P. T4 GàRNE
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: inner, Upper, Front Axle Left, Front Axle Right
• Height [mm]: 60
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 39
• Control/Trailing Arm Type: Control Arm
• Supplementary Article/Supplementary Info: without holder
• Required quantity: 2
• replacement in pairs recommended:
• Name: Puks - K„„ndmik VW P. T4 GàRNE
• Manufacturer: MEY

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
SHARAN/GALAXY/ALHAMB
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
SHARAN/GALAXY/ALHAMB
(kvaliteediklass: PJ)"

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Quality class: PJ
• Name: Control arm bush left=right

Lisainfo: "Tootja: TEKNOROT
VW T4 '91-
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
VW T4 '91-
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle, Lower, Front
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 36
• Height [mm]: 60
• Name: ALT 80966AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle, Upper, both sides, Front
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Quantity per axle: 2
• Name: Puks - K„„ndmik VW P. T4 GàRNEGO (PRZEDNIA) LE/PR
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Lower, Front, Front Axle both sides
• Required quantity: 2
• paired article number: VKDS 331033
• Height [mm]: 60.2
• Inner Diameter [mm]: 14.2
• Outer Diameter [mm]: 35.5
• Name: SK VKDS331033
• Manufacturer: SKF

• Vehicle Identification Number (VIN) to: 70-T-199 000
• Fitting Position: outer, Rear Axle
• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 55
• Thickness [mm]: 75
• Manufacturer: DELLO AUTOMEGA

• Vehicle Identification Number (VIN) from: 70-V-000001
• Fitting Position: Lower, Front, Front Axle, both sides
• Height [mm]: 60
• Inner Diameter [mm]: 14
• Control/Trailing Arm Type: for control arm
• Mounting Type: Rubber-Metal Mount
• Outer Diameter 1 [mm]: 40
• Outer Diameter 2 [mm]: 52
• Manufacturer: OPTIMAL ZAWIESZENIE

• Construction Year to: 07.1995
• Fitting Position: Front Axle, Front
• Vehicle Identification Number (VIN) to: 70 T 199 999
• Weight [kg]: 0.1
• Control/Trailing Arm Type: Control Arm
• Mounting Type: Rubber-Metal Mount
• Packaging length [cm]: 11
• Packaging width [cm]: 6
• Packaging height [cm]: 6
• Manufacturer: MONROE

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
VW TRANSP.T3 79-92
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
VW TRANSP.T3 79-92
(kvaliteediklass: PJ)"

Fitting Position: Rear Axle, outer

• Vehicle Identification Number (VIN) from: 70-M-083343
• Fitting Position: Front Axle, both sides, Rear, Lower
• Inner Diameter [mm]: 14
• Name: Puks - K„„ndmik VW P. T4 DOLNE
• Manufacturer: MAX

• Fitting Position: outer, Rear Axle both sides, Lower
• Required quantity: 2
• paired article number: VKDS 431005
• Name: SK VKDS431005
• Manufacturer: SKF

• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
V.TRANSPORTER T4 91-
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle, Rear, Lower
• Construction Year from: 06.1991
• Vehicle Identification Number (VIN) from: 70M 083 343
• Inner Diameter 1 [mm]: 14
• Outer Diameter 1 [mm]: 46
• Thickness 1 [mm]: 60
• Manufacturer: DELPHI
• Name: DE TD531W

• Vehicle Identification Number (VIN) from: 70-M-083 343
• Fitting Position: Lower, Rear, Front Axle
• Inner Diameter [mm]: 14.2
• Outer Diameter [mm]: 45.5
• Weight [kg]: 0.12
• Manufacturer: CORTECO
• Name: COC 21652951

• Vehicle Identification Number (VIN) from: 70T200000
• Fitting Position: Front Axle, outer
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Weight [kg]: 0.19
• Name: DY 37-06058-6
• Manufacturer: DYS

• Fitting Position: Lower Front Axle
• Thickness [mm]: 60
• Weight [kg]: 0.13
• Required quantity: 2
• Material: Aluminium, Rubber/Metal
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 29, 45
• Mounting Type: Rubber-Metal Mount
• Weight [g]: 130
• Manufacturer: METALCAUCHO

• Fitting Position: Rear Axle, inner
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for semi-trailing arm
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 47
• Width [mm]: 75
• SVHC: No SVHC present!
• Name: LU 829009010
• Manufacturer: FAG

• Fitting Position: Front Axle, Lower, Front
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 31
• Height [mm]: 60
• Name: ALT 80987AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle, Lower, Rear
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 46
• Height [mm]: 60
• Name: ALT 80986AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle both sides, Upper, Front
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Weight [kg]: 0.14
• Manufacturer: RTS

• Fitting Position: Upper, Front Axle, both sides
• Mounting Type: Rubber-Metal Mount
• Length [mm]: 60
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 39
• Quantity per axle: 2
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle, outer
• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 54
• Width [mm]: 75
• SVHC: No SVHC present!
• Name: Puks
• Manufacturer: FAG

• Fitting Position: Rear Axle both sides, inner, Lower
• Required quantity: 2
• paired article number: VKDS 431004
• Name: SK VKDS431004
• Manufacturer: SKF

• Fitting Position: Rear Axle Left, Rear Axle Right, outer, Lower
• Inner Diameter [mm]: 14.1
• Outer Diameter [mm]: 47.5
• Length [mm]: 75
• paired article number: 271223
• Weight [kg]: 0.21
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Front Axle both sides, Upper, Rear
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 35
• Length [mm]: 60
• Weight [kg]: 0.126
• Manufacturer: RTS

• Fitting Position: Front Axle, Front
• Vehicle Identification Number (VIN) from: 70...T...200001
• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 14.2
• Outer Diameter [mm]: 40.1
• Width [mm]: 60
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 829010310

• Fitting Position: Front Axle, Rear
• Vehicle Identification Number (VIN) from: 70-M-083 343
• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 14.2
• Outer Diameter [mm]: 45.5
• Width [mm]: 60
• SVHC: No SVHC present!
• Name: Puks
• Manufacturer: FAG

• Mounting Type: Rubber-Metal Mount
• Fitting Position: mounting
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
VW TRANSPOR.T4 9/90-
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
VW TRANSPOR.T4 9/90-
(kvaliteediklass: PJ)"

• Construction Year to: 07.1995
• Fitting Position: Front Axle, Front
• Weight [kg]: 0.2
• Required quantity: 2
• Control/Trailing Arm Type: Control Arm
• Mounting Type: Rubber-Metal Mount
• Packaging length [cm]: 11
• Packaging width [cm]: 6
• Packaging height [cm]: 6
• Manufacturer: MONROE

• Fitting Position: Lower Front Axle, Rear, both sides
• Vehicle Identification Number (VIN) from: 70-M-083343
• Mounting Type: Rubber-Metal Mount
• Left-/right-hand drive vehicles: for left-hand/right-hand drive vehicles
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Lower
• General Information: bonded rubber bush
• Manufacturer: VIKA

• Vehicle Identification Number (VIN) from: 70-M-083 343
• Axle alignment required after fitting:
• Fitting Position: Rear, Lower, Front Axle
• Control/Trailing Arm Type: Control Arm
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.152
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.