• Transmission Type: Manual Transmission, Automatic Transmission
• Length [mm]: 106
• Inner Diameter 1 [mm]: 57
• Inner Diameter 2 [mm]: 25
• Material: Polychloroprene (Neoprene)
• Manufacturer: JP GROUP
• Lisainfo: Axle boot kit, front, inner
• Additional information: Axle boot kit, front, inner

Fitting Position: Front Axle Left, Front Axle Right, transmission sided

• Transmission Type: Manual Transmission, Automatic Transmission
• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Length [mm]: 127
• Inner Diameter 1 [mm]: 87
• Inner Diameter 2 [mm]: 27
• Material: Polychloroprene (Neoprene)
• Lisainfo: Bellow Set, drive shaft
• Additional information: Bellow Set, drive shaft

• Vehicle Identification Number (VIN) from: 70-R-136 291
• Fitting Position: Wheel Side, Front Axle
• Braking/Driving Dynamics: for vehicles without ABS
• Height [mm]: 156
• Joint Type: Universal Joint
• Supplementary Article/Info 2: with clamps
• Inner Diameter 1 [mm]: 23
• Inner Diameter 2 [mm]: 112
• Name: KAITSEKUMMIKOMPLEKT, VEOVOLL
• Manufacturer: SKF

• Fitting Position: Wheel Side
• Height [mm]: 90
• Weight [kg]: 0.14
• Weight [g]: 139
• Inner Diameter 1 [mm]: 24
• Inner Diameter 2 [mm]: 88
• Manufacturer: METALCAUCHO

• Fitting Position: transmission sided, Front Axle
• Material: Rubber
• Weight [g]: 106
• Length [mm]: 100
• Inner Diameter 1 [mm]: 24
• Inner Diameter 2 [mm]: 57
• Name: IM 30703
• Manufacturer: ORIGINAL IMPERIUM

General Information: The installation of this product can be performed only in a workshop environment by trained professionals

• Fitting Position: Wheel Side
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 98
• Length [mm]: 145
• Name: Kaitsekummikomplekt, veovoll
• Manufacturer: MAX
• Lisainfo: 49-1928
• Additional information: 49-1928

• Fitting Position: transmission sided
• Inner Diameter 1 [mm]: 23
• Inner Diameter 2 [mm]: 56
• Height [mm]: 99
• Name: KAITSEKUMMIKOMPLEKT, VEOVOLL
• Manufacturer: AUT
• Additional information: D8049
• Lisainfo: D8049

• Installatsiooni pool: kastipoolselt, Esisild
• Pikkus (mm): 100
• Siseläbimõõt 1 [mm]: 24
• Siseläbimõõt 2 (mm): 57
• Manufacturer: JPN

• Fitting Position: transmission sided
• Length [mm]: 102
• Inner Diameter 1 [mm]: 24
• Inner Diameter 2 [mm]: 56
• Supplementary Article/Info 2: with clamps
• Fabrication Number: NOP-009

• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Quantity per axle: 2
• Bellows Material: Thermoplast
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 96
• Height [mm]: 145
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle
• Inner Diameter [mm]: 22
• Outer Diameter [mm]: 100
• Manufacturer: 3RG

• Fitting Position: Wheel Side
• Length [mm]: 92
• Inner Diameter 1 [mm]: 24
• Inner Diameter 2 [mm]: 92
• Supplementary Article/Info 2: with clamps
• Fabrication Number: NOP-055
• Manufacturer: NTY

• Fitting Position: Wheel Side, Front Axle both sides
• Height [mm]: 90
• Weight [kg]: 0.24
• Weight [g]: 240
• Inner Diameter 1 [mm]: 24
• Inner Diameter 2 [mm]: 90
• Manufacturer: METALCAUCHO

• Fitting Position: Wheel Side
• Inner Diameter 1 [mm]: 24
• Inner Diameter 2 [mm]: 91
• Height [mm]: 88
• Name: KAITSEKUMMIKOMPLEKT, VEOVOLL
• Manufacturer: AUT

• Length [mm]: 100
• Material: Rubber
• Fitting Position: Front Axle, transmission sided
• Inner Diameter 1 [mm]: 24
• Inner Diameter 2 [mm]: 57
• Observe service information:
• Name: KAITSEKUMMIKOMPLEKT, VEOVOLL
• Manufacturer: MAX
• Lisainfo: 104078546
• Additional information: 104078546

• Fitting Position: Front Axle
• Weight [kg]: 0.57
• Inner Diameter 1 [mm]: 31
• Inner Diameter 2 [mm]: 97
• Required quantity: 2
• Length [mm]: 146
• Material: Thermoplast
• General Information: Dust cover for outer joint
• Manufacturer: VIKA

• Fitting Position: transmission sided, Wheel Side
• Length [mm]: 147
• Thread Size: M22x1,5
• Material: Thermoplast
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 100
• Supplementary Article/Info 2: with clamps
• Fabrication Number: NOP-016
• Manufacturer: NTY

for article number: NPW-HY-514, NPW-PL-021, NPZ-BM-001, NPZ-FR-017, NPZ-HY-507, NPZ-ME-009, NPZ-MZ-049

• Fitting Position: transmission sided, Front Axle, Front Axle Left
• Length [mm]: 99
• Material: Rubber
• Inner Diameter 1 [mm]: 24
• Inner Diameter 2 [mm]: 57
• Observe service information:
• Name: KAITSEKUMMIKOMPLEKT, VEOVOLL
• Manufacturer: MAX

• Fitting Position: transmission sided, Front Axle
• Inner Diameter 1 [mm]: 24
• Inner Diameter 2 [mm]: 57
• Required quantity: 2
• Length [mm]: 99
• Material: Rubber
• General Information: Dust cover for inner joint
• Manufacturer: VIKA

• Fitting Position: Wheel Side, Front Axle both sides
• Height [mm]: 90
• Weight [kg]: 0.24
• Weight [g]: 240
• Inner Diameter 1 [mm]: 24
• Inner Diameter 2 [mm]: 90
• Manufacturer: METALCAUCHO

• Transmission Type: Manual Transmission, Automatic Transmission
• Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
• Length [mm]: 126.5
• Material: Polychloroprene (Neoprene)
• Inner Diameter 1 [mm]: 87
• Inner Diameter 2 [mm]: 26.5
• Manufacturer: GSP

• Transmission Type: Manual Transmission, Automatic Transmission
• Length [mm]: 106
• Material: Polychloroprene (Neoprene)
• for OE number: 701498201
• Inner Diameter 1 [mm]: 56.5
• Inner Diameter 2 [mm]: 25
• Manufacturer: GSP

Fitting Position: transmission sided, Front Axle Left, Front Axle Right

• Fitting Position: Front Axle, transmission sided
• for OE number: 701498201
• Manufacturer: SASIC

• Inner Diameter 1 [mm]: 25
• Inner Diameter 2 [mm]: 56.5
• Height [mm]: 106
• Manufacturer: SNR /NTN-SNR/
• Name: SN IBK54.001

Fitting Position: transmission sided, Front Axle Left, Front Axle Right

• Fitting Position: transmission sided, Front Axle
• Length [mm]: 99
• Material: Rubber
• Inner Diameter 1 [mm]: 24
• Inner Diameter 2 [mm]: 57
• Observe service information:
• Name: KAITSEKUMMIKOMPLEKT, VEOVOLL
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: transmission sided, Front Axle
• Material: Rubber
• Weight [g]: 251
• Clip manufacturer: OETIKER
• Length [mm]: 100
• Inner Diameter 1 [mm]: 24
• Inner Diameter 2 [mm]: 57
• Name: IM 30609
• Manufacturer: ORIGINAL IMPERIUM

General Information: The installation of this product can be performed only in a workshop environment by trained professionals

• Transmission Type: Manual Transmission, Automatic Transmission
• Inner Diameter 1 [mm]: 87
• Material: Polychloroprene (Neoprene)
• Length [mm]: 126
• Inner Diameter 2 [mm]: 27
• Name: KAITSEKUMMIKOMPLEKT, VEOVOLL
• Manufacturer: MAX

Fitting Position: Wheel Side, Front Axle Left, Front Axle Right, Front Axle

• Length [mm]: 100
• Material: Rubber
• Fitting Position: Front Axle, transmission sided
• Inner Diameter 1 [mm]: 24
• Weight [kg]: 0.43
• Inner Diameter 2 [mm]: 57
• Name: KAITSEKUMMIKOMPLEKT, VEOVOLL
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 130
• Inner Diameter [mm]: 62
• Outer Diameter [mm]: 94, 86, 78, 66, 38, 32, 28, 24
• Material: Rubber
• Fitting Position: Front Axle, Rear Axle
• Weight [kg]: 0.27
• Inner Diameter 3 [mm]: 74
• Supplementary Article/Info 2: with clamps
• Name: KAITSEKUMM, VEOVOLL
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Right, Wheel Side, Front Axle Left
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 96
• Height [mm]: 145
• Bellows Material: Thermoplast
• Quantity per axle: 2
• for OE number: 701 498 203AS
• Alternative Repair Kit: 108 210
• Slim Set:
• Components deviate from OE:
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: transmission sided, Front Axle
• Length [mm]: 99
• Material: Rubber
• Inner Diameter 1 [mm]: 24
• Inner Diameter 2 [mm]: 57
• Observe service information:
• Name: SW 30 93 8345
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 100
• Material: Rubber
• Fitting Position: Front Axle, transmission sided
• Inner Diameter 1 [mm]: 24
• Inner Diameter 2 [mm]: 57
• Weight [kg]: 0.43
• Observe service information:
• Name: SW 30 83 0012
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Esisild, rattapool
• Pikkus (mm): 146
• Kõrgus (mm): 146
• Siseläbimõõt 1 [mm]: 31
• Siseläbimõõt 2 (mm): 97
• Manufacturer: JPN

• Inner Diameter 1 [mm]: 24
• Inner Diameter 2 [mm]: 108
• Height [mm]: 120
• Bellows Material: Rubber
• Quantity per axle: 2
• Full Set:
• Manufacturer: TOPRAN

Fitting Position: Front Axle Left, Front Axle Right, transmission sided General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Transmission Type: Manual Transmission, Automatic Transmission
• Inner Diameter 1 [mm]: 24
• Inner Diameter 2 [mm]: 56
• Height [mm]: 102
• Thread Size: M10x1.5x48
• Bellows Material: NBR (nitrile butadiene rubber)
• New Part:
• Supplementary Article/Info 2: with screw
• Supplementary Article/Supplementary Info: with grease
• Name: Kaitsekummikomplekt, veovoll
• Manufacturer: GKN

Fitting Position: transmission sided, Front Axle Left, Front Axle Right General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.

• Vehicle Identification Number (VIN): [70-R-136291;]
• Height [mm]: 138
• Inner Diameter 1 [mm]: 26
• Inner Diameter 2 [mm]: 86
• Fitting Position: Wheel Side
• Manufacturer: SNR
• Name: SN OBK54.016

• Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
• Inner Diameter 1 from [mm]: 30
• Inner Diameter 1 to [mm]: 36
• Inner Diameter 2 from [mm]: 79
• Inner Diameter 2 to [mm]: 90
• Height [mm]: 118.5
• New Part:
• Supplementary Article/Supplementary Info: with grease
• Manufacturer: LOBRO

General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.

• Inner Diameter 1 [mm]: 24
• Slim Set:
• Length [mm]: 103
• Height [mm]: 100
• Inner Diameter 2 [mm]: 57
• Fitting Position: transmission sided, Front Axle
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
• Inner Diameter 1 [mm]: 23
• Inner Diameter 2 [mm]: 116
• Height [mm]: 136
• Name: SN OBK10.002
• Manufacturer: SNR

• Fitting Position: Wheel Side
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 98
• Height [mm]: 145
• Name: KAITSEKUMMIKOMPLEKT, VEOVOLL
• Manufacturer: AUT
• Additional information: D8187T AUT
• Lisainfo: D8187T AUT

• Fitting Position: transmission sided
• Inner Diameter 1 [mm]: 24
• Inner Diameter 2 [mm]: 108
• Height [mm]: 120
• Name: KAITSEKUMMIKOMPLEKT, VEOVOLL
• Manufacturer: AUT

• Inner Diameter 1 from [mm]: 21
• Inner Diameter 1 to [mm]: 25
• Inner Diameter 2 from [mm]: 57
• Inner Diameter 2 to [mm]: 65
• Height [mm]: 90
• New Part:
• Supplementary Article/Supplementary Info: with grease
• Name: Kaitsekumm, veovoll
• Manufacturer: GKN

Fitting Position: transmission sided, Front Axle Left, Front Axle Right General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.

• Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
• Inner Diameter 1 from [mm]: 25
• Inner Diameter 1 to [mm]: 30
• Inner Diameter 2 from [mm]: 84
• Inner Diameter 2 to [mm]: 96
• Height [mm]: 105
• New Part:
• Supplementary Article/Supplementary Info: with grease
• Name: Kaitsekumm, veovoll
• Manufacturer: GKN

General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.

• Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
• Inner Diameter 1 from [mm]: 24
• Inner Diameter 1 to [mm]: 28
• Inner Diameter 2 from [mm]: 92
• Inner Diameter 2 to [mm]: 105
• Height [mm]: 83
• New Part:
• Supplementary Article/Supplementary Info: with grease
• Name: Kaitsekumm, veovoll
• Manufacturer: GKN

General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.

• Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
• Transmission Type: Manual Transmission, Automatic Transmission
• Inner Diameter 1 [mm]: 30
• Inner Diameter 2 [mm]: 95
• Height [mm]: 144
• Thread Size: M16x1.5x77
• Bellows Material: TPE (thermoplastic elastomer)
• New Part:
• Supplementary Article/Info 2: with screw
• Supplementary Article/Supplementary Info: with grease
• Name: Kaitsekummikomplekt, veovoll
• Manufacturer: GKN

General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.

• Vehicle Identification Number (VIN) from: 70-S-000001
• Fitting Position: Front Axle, Wheel Side
• Height [mm]: 90
• Inner Diameter 1 [mm]: 24
• Inner Diameter 2 [mm]: 90
• Name: KAITSEKUMMIKOMPLEKT, VEOVOLL
• Manufacturer: SKF

• Fitting Position: Wheel Side
• Length [mm]: 145
• Material: TPE (thermoplastic elastomer)
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 96
• Manufacturer: METALCAUCHO

• Vehicle Identification Number (VIN) from: 70-R-136 291
• Fitting Position: Front Axle, Wheel Side
• Braking/Driving Dynamics: for vehicles with ABS
• Height [mm]: 144
• Inner Diameter 1 [mm]: 27
• Inner Diameter 2 [mm]: 94
• General Information: Rubber as alternative
• Manufacturer: SKF
• Name: SK VKJP3046R

• Fitting Position: transmission sided
• Inner Diameter 1 [mm]: 24
• Inner Diameter 2 [mm]: 58
• Height [mm]: 101
• Manufacturer: 3RG

• Fitting Position: Wheel Side, Front Axle
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 98
• Length [mm]: 145
• Material: Thermoplast
• Name: KAITSEKUMMIKOMPLEKT, VEOVOLL
• Manufacturer: MEY

• Vehicle Identification Number (VIN) from: 70-R-136 291
• Fitting Position: transmission sided, Front Axle
• Height [mm]: 98
• Joint Type: CV Joint
• Inner Diameter 1 [mm]: 24
• Inner Diameter 2 [mm]: 57
• Manufacturer: SKF
• Name: SK VKJP6012

• Full Set:
• Fitting Position: transmission sided, Front Axle
• Required quantity: 2
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Length [mm]: 115
• Height [mm]: 83
• Inner Diameter 1 [mm]: 34
• Inner Diameter 2 [mm]: 80
• Full Set:
• Fitting Position: transmission sided, Front Axle
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) from: 70-R-136 291
• Fitting Position: Wheel Side, Front Axle
• Braking/Driving Dynamics: for vehicles with ABS
• Height [mm]: 145
• Material: Thermoplast
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 96
• Manufacturer: SKF
• Name: SK VKJP3046

• Fitting Position: Front Axle, Wheel Side
• Diameter 1/Diameter 2 [mm]: 29/98
• Length [mm]: 145
• Material: Thermoplast
• Net weight [kg]: 0.27
• Name: KAITSEKUMMIKOMPLEKT, VEOVOLL
• Manufacturer: NK

• Length [mm]: 146
• Material: Thermoplast
• Fitting Position: Front Axle, Wheel Side
• Height [mm]: 146
• Inner Diameter 1 [mm]: 31
• Weight [kg]: 0.57
• Inner Diameter 2 [mm]: 97
• Observe service information:
• Name: KAITSEKUMMIKOMPLEKT, VEOVOLL
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Outer Diameter [mm]: 27, 75, 92, 100, 108, 116
• Material: Rubber
• Fitting Position: Front Axle, Rear Axle
• Height [mm]: 151
• Weight [kg]: 0.23
• Supplementary Article/Info 2: with clamps
• Observe service information:
• Name: KAITSEKUMM, VEOVOLL
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Length [mm]: 43
• Material: NBR (nitrile butadiene rubber)
• Inner Diameter 1 [mm]: 22
• Inner Diameter 2 [mm]: 100
• Manufacturer: FEBEST

• Height [mm]: 100
• Material: Thermoplast
• Length [mm]: 100
• Inner Diameter 1 [mm]: 27
• Inner Diameter 2 [mm]: 100
• Slim Set:
• Fitting Position: transmission sided, Rear Axle
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.