Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Quantity per packing unit: 10
- Inner Diameter [mm]: 28.5
- Sealing Ring Diameter [mm]: 28.5
- Thickness [mm]: 3.8
-
Shape: O-
Ring - Manufacturer: TOPRAN HANS PRIES
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Quantity per packing unit: 10
- Thickness [mm]: 3.8
- Outer Diameter [mm]: 28.5
- Material: Rubber
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Main Expansion Tank
- Quantity per packing unit: 25
- Inner Diameter [mm]: 28.3
- Outer Diameter [mm]: 32.1
- Thickness [mm]: 3.9
-
Shape: O-
Ring - Manufacturer: ELRING
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
-
Vehicle Identification Number (VIN) from: 70-
N- 140001 - Diameter [mm]: 78
- Height [mm]: 35.5
- Pressure [bar]: 1.2
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Name: Radiator
- Quality class: ZJ
Lisainfo: TRANSPORTER T4 91- (kvaliteediklass ZJ)
- Transmission Type: Manual Transmission
- Radiator type: Mechanically jointed cooling fins
- Core Depth [mm]: 32
- Core Length [mm]: 720
- Core Width [mm]: 378
- Inlet Ø [mm]: 32
- Outlet Ø [mm]: 32
- Manufacturer: TYC
- Core Length [mm]: 720
- Core Width [mm]: 355
- Core Depth [mm]: 34
- Inlet Ø [mm]: 32
- Outlet Ø [mm]: 32
- Radiator type: Mechanically jointed cooling fins
- reinforced version:
- Packaging length [cm]: 87
- Packaging width [cm]: 42.5
- Packaging height [cm]: 11
- Weight [kg]: 3.56
- Manufacturer: AKSDASIS
- Core Length [mm]: 722
- Core Width [mm]: 378
- Core Depth [mm]: 32
-
Transmission Type: Automatic Transmission,
Manual Transmission - Heating/Cooling: with thermal switch connector
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS LORO
Vehicle Equipment: for vehicles with air conditioning, for vehicles with short driver cab, for vehicles without air conditioning General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Radiator type: Mechanically jointed cooling fins
- Cooling fins material: Aluminium
- Water Tank Material (radiator): Plastic
- Core Depth [mm]: 32
- Core Length [mm]: 718
- Core Width [mm]: 359
- Manufacturer: KAMOKA
- Adjustment: with manual adjustment
- Core Depth [mm]: 0
- Core Length [mm]: 0
- Core Width [mm]: 0
- General Information: radiator; MT
- Manufacturer: VIKA
- Transmission Type: Manual Transmission
-
Vehicle Equipment: for vehicles with/
without air conditioning - Construction Year from: 10.1991
- Core Depth [mm]: 32
- Core Length [mm]: 720
- Core Width [mm]: 348
- Radiator type: Brazed cooling fins
- Water Tank Material (radiator): Plastic
- Name: Radiator
- Quality class: PJ
Lisainfo: TRANSPORTER T4 91- (kvaliteediklass PJ) Additional information: TRANSPORTER T4 91- (kvaliteediklass PJ)
- Material: Aluminium
- Core Length [mm]: 720
- Core Width [mm]: 346
- Core Depth [mm]: 34
- Supplementary Article/Info 2: with mounting parts
- Radiator type: Brazed cooling fins
- Manufacturer: NRF
-
Lisainfo: 720*345,
8*34 -
Additional information: 720*345,
8*34
- Core Length [mm]: 720
- Core Width [mm]: 377
- Core Depth [mm]: 32
- Cooling fins material: Aluminium
- Water Tank Material (radiator): Plastic
- Manufacturer: JP GROUP
-
Lisainfo: Radiator,
720x377 mm, PL/ ALU -
Additional information: Radiator,
720x377 mm, PL/ ALU
- Engine Code: 1X
- Core Width [mm]: 341
- Core Length [mm]: 720
- Core Depth [mm]: 34
- Radiator type: Mechanically jointed cooling fins
- Technical Information: Aluminium core with plastyic tanks
- Name: MM BM1746
- Manufacturer: MAGNETI MARELLI
- Cooling fins material: Aluminium
- Core Depth [mm]: 34
- Core Length [mm]: 723
- Core Width [mm]: 378
- Inlet Ø [mm]: 32
- Outlet Ø [mm]: 32
- Radiator type: Mechanically jointed cooling fins
- Supplementary Article/Info 2: without expansion tank
- Water Tank Material (radiator): Plastic
- Manufacturer: AVA
- Cooling fins material: Aluminium
- Core Depth [mm]: 32
- Core Length [mm]: 718
- Core Width [mm]: 359
- Inlet Ø [mm]: 31.5
- Outlet Ø [mm]: 31.5
- Radiator type: Brazed cooling fins
-
Supplementary Article/Info 2: with cap,
without expansion tank -
Supplementary Article/Supplementary Info: with gaskets/
seals - Water Tank Material (radiator): Plastic
- Manufacturer: NISSENS
- Name: NI 65273A
-
Lisainfo: VOLKSWAGEN TRANSPORTER T4
(70X, 7D) (90- ) 2.4 D -
Additional information: VOLKSWAGEN TRANSPORTER T4
(70X, 7D) (90- ) 2.4 D
Installation Information: MultiFit - Nissens has combined multiple product designs into one part
- Radiator type: Mechanically jointed cooling fins
- Heating/Cooling: with thermal switch connector
- Core Length [mm]: 720
- Core Width [mm]: 349
- Core Depth [mm]: 32
- Water Tank Material (radiator): Plastic
- Vehicle Equipment: for vehicles with short driver cab
-
Transmission Type: Automatic Transmission,
Manual Transmission - Packaging height [cm]: 12
-
Net Weight [g]: 3,
407 - Packaging width [cm]: 45
- Packaging length [cm]: 92
- Name: MH CR398000S
- Manufacturer: MAHLE
General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
- Core Length [mm]: 720
- Core Width [mm]: 302
- Core Depth [mm]: 34
- Inlet Ø [mm]: 32
- Outlet Ø [mm]: 32
- Radiator type: Mechanically jointed cooling fins
- Water Tank Material (radiator): Plastic
- Cooling fins material: Aluminium
- reinforced version:
- Packaging length [cm]: 93
- Packaging width [cm]: 44.5
- Packaging height [cm]: 11.5
- Weight [kg]: 2.66
- Manufacturer: AKSDASIS
- Material: Aluminium
- Core Length [mm]: 720
- Core Width [mm]: 378
- Core Depth [mm]: 34
- Version: Alternative
- Radiator type: Mechanically jointed cooling fins
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks