• Filter type: In-Line Filter
• Height [mm]: 142
• Outer Diameter [mm]: 32
• Outer Diameter 1 [mm]: 37
• Lisainfo: Fuel filter
• Additional information: Fuel filter

• Filter type: Spin-on Filter
• Outer Diameter [mm]: 36
• Inner Diameter [mm]: 6
• Height [mm]: 105
• Name: Fuel filter
• Quality class: PJ

Lisainfo: "Tootja: COOPERSFIAAM FILTERS
UNI
(kvaliteediklass: PJ)" Additional information: "Tootja: COOPERSFIAAM FILTERS
UNI
(kvaliteediklass: PJ)"

• Filter type: In-Line Filter
• Manufacturer Restriction: universal
• Height [mm]: 109
• Outer Diameter [mm]: 36
• Name: Ktusefilter
• Manufacturer: MAX

• Filter type: In-Line Filter
• Height [mm]: 106.5
• Outer Diameter [mm]: 35.5
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 6
• Name: KšTUSEFILTER
• Manufacturer: ALC

• Outer Diameter [mm]: 31.5
• Length [mm]: 140
• Width [mm]: 95
• Height [mm]: 142
• Filter type: Spin-on Filter
• Outer Diameter 1 [mm]: 37
• Weight [kg]: 0.104
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Filter type: In-Line Filter
• Outer Diameter [mm]: 36
• Overall Length [mm]: 136
• Manufacturer: HENGST FILTER

• Filter type: In-Line Filter
• Fuel Type: Petrol
• Height [mm]: 125
• Outer Diameter [mm]: 48
• Inlet Ø [mm]: 6
• Outlet Ø [mm]: 6
• Manufacturer: KAMOKA FILTRY PALIWA

• Engine Code: AC
• Filter type: In-Line Filter
• Height [mm]: 116
• Outer Diameter [mm]: 51
• Outer Diameter 1 [mm]: 44
• Inlet Ø [mm]: 6
• Outlet Ø [mm]: 6
• Weight [kg]: 0.07
• Manufacturer: VALEO

• Filter type: In-Line Filter
• Height [mm]: 118
• Outer Diameter [mm]: 48
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• SVHC: No SVHC present!
• Manufacturer: FILTRON

• Filter type: In-Line Filter
• Length [mm]: 97
• Outer Diameter [mm]: 49
• Diameter 1/ Diameter 2 [mm]: IN/OUT: 8
• Manufacturer: JAPKO

• Height [mm]: 142
• Outer Diameter [mm]: 31.5
• Outer Diameter 1 [mm]: 37
• Outlet Ø [mm]: 6.5
• Inlet Ø [mm]: 8.4
• Filter type: Filter Insert
• Manufacturer: SOFIMA

• Filter type: In-Line Filter
• Diameter [mm]: 30
• Height [mm]: 143.5
• Inlet Ø [mm]: 6
• Outlet Ø [mm]: 6.1
• Net Weight [g]: 17
• Packaging width [cm]: 4
• Packaging height [cm]: 4
• Packaging length [cm]: 8
• Manufacturer: KNECHT

• Filter type: In-Line Filter
• Height [mm]: 142
• Outer Diameter [mm]: 32
• Outlet Ø [mm]: 6
• Outer Diameter 1 [mm]: 37
• Outer Diameter 2 [mm]: 8
• SVHC: No SVHC present!
• Manufacturer: MANN-FILTER

• Engine Code: AB
• Height [mm]: 118
• Fuel Type: Petrol
• Filter type: In-Line Filter
• External Thread [mm]: 6
• Outer Diameter [mm]: 48
• Manufacturer: MAGNETI MARELLI

• Construction Year from: 08.1971
• Construction Year to: 07.1972
• Fitting Position: Front Axle
• Thickness [mm]: 15
• Registration Type: ECE approved
• Manufacturer: JP GROUP
• Lisainfo: Brake pad set, 15.0 mm
• Additional information: Brake pad set, 15.0 mm

• Fitting Position: Front Axle
• FMSI Code: D30-7200 D322-7221
• Test Mark: E1 90R-011094/1266
• WVA Number: 20009
• Brake System: Continental
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• Friction Lining Material: Organic
• Wear Warning Contact: not prepared for wear indicator
• Width 1 [mm]: 55.8
• Width 2 [mm]: 55.7
• Height 1 [mm]: 52.8
• Height 2 [mm]: 52.8
• Thickness 1 [mm]: 14.7
• Thickness 2 [mm]: 14.7
• Manufacturer: DELPHI

• WVA Number: 20009
• Fitting Position: Front Axle
• Manufacturer: JAPKO

• Vehicle Identification Number (VIN) to: 1332013626
• Fitting Position: Front Axle, Rear Axle
• Brake System: TEVES
• Width [mm]: 56
• Height [mm]: 53.4
• Thickness [mm]: 15
• WVA Number: 20010
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: without anti-squeak plate
• Test Mark: ECE-R90
• Weight [kg]: 0.585
• Manufacturer: VALEO

• Fitting Position: Front Axle
• Construction Year from: 07.1971
• Manufacturer Restriction: ATE
• Wear Warning Contact: not prepared for wear indicator
• Height [mm]: 53
• Thickness [mm]: 15
• Width [mm]: 56
• Name: Piduriklotsi komplekt,ketaspidur
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Diameter [mm]: 230
• Width [mm]: 40
• Net weight [kg]: 1.65
• Name: PIDURIKLOTSIDE KOMPLEKT
• Manufacturer: NK

• Fitting Position: Front Axle
• Construction Year from: 07.1971
• Manufacturer Restriction: ATE
• Wear Warning Contact: not prepared for wear indicator
• Height [mm]: 53
• Width [mm]: 55.7
• Thickness [mm]: 15
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Construction Year to: 07.1972
• Fitting Position: Rear Axle
• Inner brake drum diameter [mm]: 230
• Width [mm]: 40
• MAPP code available:
• Article number of recommended accessories: 03.0137-9005.2, 03.0137-9229.2
• Observe dimensions:
• Name: Piduriklotside komplekt
• Manufacturer: ATE

• Construction Year from: 08.1972
• Fitting Position: Front Axle
• Thickness [mm]: 16.3
• Wear Warning Contact: excl. wear warning contact
• Brake System: Lucas / TRW
• Manufacturer: JP GROUP
• Lisainfo: Brake pad set, 16.3 mm, front
• Additional information: Brake pad set, 16.3 mm, front

• Fitting Position: Rear Axle
• Manufacturer Restriction: VAG
• Test Mark: E1 90R 01195/041
• Inner brake drum diameter [mm]: 230
• Width [mm]: 40
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Inner brake drum diameter [mm]: 230
• Width [mm]: 40
• Thickness [mm]: 6.5
• Friction Surface Width [mm]: 38
• Supplementary Article/Supplementary Info: without accessories
• Brake System: VAG
• Supplementary Article/Info 2: without handbrake lever
• Packaging length [cm]: 21.5
• Packaging width [cm]: 18.7
• Packaging height [cm]: 9.7
• Weight [kg]: 1.53
• Name: PIDURIKLOTSIDE KOMPLEKT
• Manufacturer: TEX

• Vehicle Identification Number (VIN) from: 1122076274
• Vehicle Identification Number (VIN) to: 1332013626
• Fitting Position: Front Axle
• Width [mm]: 55.7
• Height [mm]: 53
• Thickness [mm]: 15
• Brake System: ATE
• MAPP code available:
• Article number of recommended accessories: 13.0460-0014.2
• Observe dimensions:
• Name: Piduriklotsi komplekt,ketaspidur
• Manufacturer: ATE

Wear Warning Contact: not prepared for wear indicator, excl. wear warning contact

• Construction Year to: 07.1972
• Fitting Position: Rear Axle
• Supplementary Article/Supplementary Info: with wheel brake cylinder, with accessories
• Piston Diameter [mm]: 17.5
• Inner brake drum diameter [mm]: 230
• Width [mm]: 40
• Brake System: ATE
• Manufacturer: ATE