Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Rear Axle,
Rear - Quality: OE Performance
- Material: Rubber
- Colour: black
- Weight [g]: 35
- Inner Diameter [mm]: 27
- Manufacturer: GATES PASKI PRZEWODY
- Engine Code: CXHC
- Stabiliser Bar Diameter [mm]: 22
- Length [mm]: 43
- Width [mm]: 43
- Thickness [mm]: 46
- Inner Diameter [mm]: 21
- Material: Rubber
-
Fitting Position: Rear Axle,
outer - Weight [kg]: 0.04
- Manufacturer: FEBI
- Additional information: 100 076 HP
- Lisainfo: 100 076 HP
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Stabiliser Bar Diameter [mm]: 23
- Model Year to: 2020
- Fitting Position: Front Axle both sides
- Width [mm]: 48
- Height 1 [mm]: 42
- Height 2 [mm]: 35
- Inner Diameter [mm]: 22
- Mounting Type: Rubber Mount
- Length [m]: 52
- Manufacturer: OPTIMAL ZAWIESZENIE
-
Fitting Position: Rear Axle,
inner - Stabiliser Bar Diameter [mm]: 24
- Mounting Type: Rubber Mount
- Inner Diameter [mm]: 27
- Outer Diameter [mm]: 47
- Width 1 [mm]: 49
- Width 2 [mm]: 40
- SVHC: No SVHC present!
- Name: LU 819023410
- Manufacturer: FAG
- Stabiliser Bar Diameter [mm]: 23
- Model Year to: 2020
- Weight [kg]: 0.05
- Inner Diameter [mm]: 22
- Mounting Type: Rubber Mount
- Fitting Position: Front Axle both sides
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: CXHC
- Stabiliser Bar Diameter [mm]: 28
- Length [mm]: 44
- Width [mm]: 47
- Thickness [mm]: 37
- Inner Diameter [mm]: 27
- Outer Diameter [mm]: 47
- Material: Rubber
- Fitting Position: Rear Axle
- Weight [kg]: 0.3
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: outer,
Rear Axle both sides - Inner Diameter [mm]: 23
- Outer Diameter [mm]: 27
- Manufacturer: FAST
- Engine Code: CXHC
- Stabiliser Bar Diameter [mm]: 28
- Length [mm]: 44
- Width [mm]: 47
- Thickness [mm]: 37
- Inner Diameter [mm]: 27
- Outer Diameter [mm]: 47
- Material: Rubber
- Fitting Position: Rear Axle
- Weight [kg]: 0.3
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Mounting Type: Rubber Mount
- Inner Diameter [mm]: 22
- Width [mm]: 52
- SVHC: No SVHC present!
- Name: LU 819023210
- Manufacturer: FAG
- Engine Code: CXHC
- Stabiliser Bar Diameter [mm]: 24
- Length [mm]: 53.5
- Width [mm]: 47.6
- Thickness [mm]: 41.7
- Inner Diameter [mm]: 23
- Outer Diameter [mm]: 48
- Material: Rubber
-
Fitting Position: Rear Axle,
inner - Weight [kg]: 0.3
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: CXHC
- Stabiliser Bar Diameter [mm]: 24
- Inner Diameter [mm]: 23
- Outer Diameter [mm]: 27
-
Fitting Position: Rear Axle,
outer - Weight [kg]: 0.054
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: CXHC
- Stabiliser Bar Diameter [mm]: 24
- Inner Diameter [mm]: 23
- Outer Diameter [mm]: 27
-
Fitting Position: Rear Axle,
outer - Weight [kg]: 0.054
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle,
inner - Stabiliser Bar Diameter [mm]: 22
- Mounting Type: Rubber Mount
- Inner Diameter [mm]: 21
- Outer Diameter [mm]: 47
- Width 1 [mm]: 50
- Width 2 [mm]: 40
- SVHC: No SVHC present!
- Name: LU 819023510
- Manufacturer: FAG
- Engine Code: CXHC
- Stabiliser Bar Diameter [mm]: 22
- Length [mm]: 43
- Width [mm]: 43
- Thickness [mm]: 46
- Inner Diameter [mm]: 21
- Material: Rubber
-
Fitting Position: Rear Axle,
outer - Weight [kg]: 0.04
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: CXHC
- Stabiliser Bar Diameter [mm]: 22
- Length [mm]: 50
- Width [mm]: 48.2
- Thickness [mm]: 49.7
- Inner Diameter [mm]: 20.9
- Outer Diameter [mm]: 47
- Material: Rubber
- Fitting Position: Rear Axle
- Weight [kg]: 0.5
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: CXHC
- Stabiliser Bar Diameter [mm]: 28
- Length [mm]: 48
- Width [mm]: 50
- Thickness [mm]: 42
- Inner Diameter [mm]: 27
- Outer Diameter [mm]: 48
- Material: Rubber
-
Fitting Position: Rear Axle,
inner - Weight [kg]: 0.039
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: CXHC
- Stabiliser Bar Diameter [mm]: 22
- Length [mm]: 50
- Width [mm]: 48.2
- Thickness [mm]: 49.7
- Inner Diameter [mm]: 20.9
- Outer Diameter [mm]: 47
- Material: Rubber
- Fitting Position: Rear Axle
- Weight [kg]: 0.5
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: CXHC
- Stabiliser Bar Diameter [mm]: 28
- Length [mm]: 48
- Width [mm]: 50
- Thickness [mm]: 42
- Inner Diameter [mm]: 27
- Outer Diameter [mm]: 48
- Material: Rubber
-
Fitting Position: Rear Axle,
inner - Weight [kg]: 0.039
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Stabiliser Bar Diameter [mm]: 23
- Model Year to: 2020
-
Fitting Position: Front Axle Left,
Front Axle Right - Width [mm]: 48
- Height 1 [mm]: 42
- Height 2 [mm]: 35
- Inner Diameter [mm]: 22
- Mounting Type: Rubber Mount
- Quantity Unit: Set
- Length [m]: 52
- Manufacturer: OPTIMAL ZAWIESZENIE
- Fitting Position: Front Axle
- Mounting Type: Rubber Mount
- Inner Diameter [mm]: 24
- Width [mm]: 52
- SVHC: No SVHC present!
- Name: LU 819023110
- Manufacturer: FAG
- Model Year from: 2020
- Fitting Position: Rear Axle both sides
- Weight [kg]: 0.203
- Inner Diameter [mm]: 27
- Packaging length [cm]: 8.8
- Packaging width [cm]: 8.2
- Packaging height [cm]: 4.8
- Manufacturer: FEBEST
-
for PR number: 1BA,
1BB, 1BJ, 2MD, 1BL -
Fitting Position: Rear Axle Left,
Rear Axle Right, inner - Inner Diameter [mm]: 23
- Quantity per axle: 2
- Observe dimensions:
- Manufacturer: LEMFÃRDER
- Name: LMI 4217401
SVHC: No information available, please contact the manufacturer!
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks