• Fitting Position: Rear Axle Left, Rear Axle Right, outer
• Inner Diameter [mm]: 27
• Lisainfo: Grommet for stabilizer, rear, outer, ®27.0 mm
• Additional information: Grommet for stabilizer, rear, outer, ®27.0 mm

• Fitting Position: Front Axle Left, Front Axle Right
• Inner Diameter [mm]: 22
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Fitting Position: Front Axle, inner
• Mounting Type: Rubber Mount
• Stabiliser Bar Diameter [mm]: 22
• Inner Diameter [mm]: 20.5
• Length [mm]: 52
• Width [mm]: 50
• Height [mm]: 42
• for OE number: 7H0411313
• Manufacturer: SASIC

• Fitting Position: Rear Axle, inner
• Material: Rubber
• Thickness [mm]: 42
• Length [mm]: 54
• Width [mm]: 48
• Inner Diameter [mm]: 23
• Outer Diameter [mm]: 48
• Manufacturer: MERTZ

• Fitting Position: Rear Axle, outer
• Material: Rubber
• Thickness [mm]: 46
• Length [mm]: 43
• Width [mm]: 43
• Inner Diameter [mm]: 21
• Manufacturer: MERTZ

• Fitting Position: Rear Axle both sides
• Inner Diameter [mm]: 23
• Outer Diameter [mm]: 27
• Manufacturer: MERTZ

• Engine Code: CXHA, CXFA
• Stabiliser Bar Diameter [mm]: 22
• Length [mm]: 50
• Inner Diameter [mm]: 21
• Outer Diameter [mm]: 47
• Material: Rubber
• Fitting Position: Rear Axle Left, Rear Axle Right
• Thickness [mm]: 50
• Width [mm]: 48
• Name: Kinnitus,stabilisaator
• Manufacturer: MAX

• Fitting Position: Front Axle both sides
• Inner Diameter [mm]: 24
• Manufacturer: MERTZ

• Fitting Position: Rear Axle
• Material: Rubber
• Thickness [mm]: 50
• Length [mm]: 50
• Width [mm]: 48
• Inner Diameter [mm]: 21
• Outer Diameter [mm]: 47
• Manufacturer: MERTZ

• Fitting Position: Rear Axle, outer
• Mounting Type: Rubber Mount
• Stabiliser Bar Diameter [mm]: 24
• for OE number: 7H5511414
• Manufacturer: SASIC

• Fitting Position: Front Axle
• for OE number: 7H0 411 313
• Manufacturer: GSP

• Fitting Position: Front Axle Left, Front Axle Right
• Inner Diameter [mm]: 24
• Manufacturer: JP GROUP
• Lisainfo: Grommet for stabilizer, front, ®24.0 mm
• Additional information: Grommet for stabilizer, front, ®24.0 mm

• Fitting Position: Front
• Diameter [mm]: 24
• Weight [kg]: 0.065
• Inner Diameter [mm]: 24
• Packaging length [cm]: 5.1
• Packaging width [cm]: 4.8
• Packaging height [cm]: 4.1
• Manufacturer: FEBEST

• Fitting Position: Rear Axle, outer
• Mounting Type: Rubber Mount
• Stabiliser Bar Diameter [mm]: 27
• for OE number: 7H5511414A
• Manufacturer: SASIC

• Fitting Position: Rear Axle, outer
• Mounting Type: Rubber Mount
• Stabiliser Bar Diameter [mm]: 21
• for OE number: 7H0511414
• Manufacturer: SASIC

• Fitting Position: Rear Axle, inner
• Mounting Type: Rubber Mount
• Stabiliser Bar Diameter [mm]: 24.5
• Inner Diameter [mm]: 23
• Length [mm]: 42
• Width [mm]: 53
• Height [mm]: 48
• for OE number: 7H5511413B
• Manufacturer: SASIC

• Fitting Position: Front Axle
• Inner Diameter [mm]: 21
• SVHC: No SVHC present!
• Name: Kinnitus,stabilisaator
• Manufacturer: FAG

• Fitting Position: Rear Axle, Rear
• Quality: OE Performance
• Material: Rubber
• Colour: black
• Weight [g]: 35
• Inner Diameter [mm]: 27
• Manufacturer: GATES PASKI PRZEWODY

• Model Year from: 2016
• Model Year to: 2019
• Fitting Position: outer, Rear Axle
• Diameter [mm]: 21
• Weight [kg]: 0.066
• Inner Diameter [mm]: 21
• Packaging length [cm]: 4.7
• Packaging width [cm]: 4.4
• Packaging height [cm]: 4.3
• Manufacturer: FEBEST

• Fitting Position: Rear Axle, inner
• Mounting Type: Rubber Mount
• Stabiliser Bar Diameter [mm]: 27
• Inner Diameter [mm]: 26.5
• Length [mm]: 51
• Width [mm]: 48
• Height [mm]: 41
• for OE number: 7H5511413C
• Manufacturer: SASIC

• Fitting Position: Rear Axle Left, Rear Axle Right, outer
• Inner Diameter [mm]: 23
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Diameter [mm]: 21
• Fitting Position: Rear Axle both sides, inner, Left, Right
• Fabrication Number: ZGS-VW-006

• Fitting Position: Rear Axle, inner
• Mounting Type: Rubber Mount
• Stabiliser Bar Diameter [mm]: 21
• Inner Diameter [mm]: 20.5
• Length [mm]: 50
• Width [mm]: 47
• Height [mm]: 40
• for OE number: 7H0511413A
• Manufacturer: SASIC

• Fitting Position: Front Axle
• Inner Diameter [mm]: 22
• General Information: rubber bush; 22MM
• Manufacturer: VIKA

• for PR number: 1BL, 1BQ, 1BV, 2MF, 2MG, 2MH, 2MR
• Fitting Position: Front
• Inner Diameter [mm]: 24
• Observe dimensions:
• Name: Paigutus - K„„ndmik VW P. T5 03- 24MM
• Manufacturer: MAX

• Fitting Position: Front Axle, inner
• Mounting Type: Rubber Mount
• Stabiliser Bar Diameter [mm]: 25
• Inner Diameter [mm]: 23.5
• Length [mm]: 55
• Width [mm]: 50
• Height [mm]: 45
• for OE number: 7H5411313B
• Manufacturer: SASIC

• Fitting Position: Rear
• Inner Diameter [mm]: 23
• General Information: rubber bush
• Manufacturer: VIKA

• Fitting Position: Rear Axle Left, Rear Axle Right
• Inner Diameter [mm]: 21
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Fitting Position: Rear Axle
• Required quantity: 2
• Weight [g]: 58
• Inner Diameter [mm]: 19
• Name: IM 37642
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Rear
• Inner Diameter [mm]: 21
• General Information: rubber bush
• Manufacturer: VIKA

• Engine Code: CXHA, CXFA
• Stabiliser Bar Diameter [mm]: 22
• Length [mm]: 43
• Width [mm]: 43
• Thickness [mm]: 46
• Inner Diameter [mm]: 21
• Material: Rubber
• Fitting Position: Rear Axle, outer
• Weight [kg]: 0.04
• Name:
• Manufacturer: FEB
• Additional information: 100 076 HP
• Lisainfo: 100 076 HP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle both sides, Lower
• Inner Diameter [mm]: 21
• Length [mm]: 51
• Weight [kg]: 0.05
• Manufacturer: RTS

• Engine Code: CXHA, CXFA
• Stabiliser Bar Diameter [mm]: 22
• Fitting Position: Rear Axle Left, Rear Axle Right
• Material: Rubber
• Inner Diameter [mm]: 21
• Mounting Type: Rubber Mount
• Weight [kg]: 0.05
• Required quantity: 2
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear
• Inner Diameter [mm]: 27
• General Information: rubber bush
• Manufacturer: VIKA

• Fitting Position: Rear Axle, inner
• Stabiliser Bar Diameter [mm]: 24
• Mounting Type: Rubber Mount
• Inner Diameter [mm]: 27
• Outer Diameter [mm]: 47
• Width 1 [mm]: 49
• Width 2 [mm]: 40
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 819023410

• Inner Diameter 1 [mm]: 21
• Manufacturer: CORTECO
• Name: COC 80004692

Fitting Position: Front Axle, Right, Left, Front Axle Left, Front Axle Right

• Model Year from: 2016
• Model Year to: 2019
• Fitting Position: inner, Rear Axle
• Diameter [mm]: 21
• Weight [kg]: 0.068
• Inner Diameter [mm]: 21
• Packaging length [cm]: 5
• Packaging width [cm]: 4.8
• Packaging height [cm]: 4.2
• Manufacturer: FEBEST

• Stabiliser Bar Diameter [mm]: 23
• Model Year to: 2020
• Weight [kg]: 0.05
• Inner Diameter [mm]: 22
• Mounting Type: Rubber Mount
• Fitting Position: Front Axle both sides
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle
• Inner Diameter [mm]: 23
• Outer Diameter [mm]: 27
• Length [mm]: 44
• Required quantity: 2
• Mounting Type: Rubber Mount
• Name: ALT 86133AL
• Manufacturer: ALTE AUTOMOTIVE

• Engine Code: CXHA, CXFA
• Stabiliser Bar Diameter [mm]: 28
• Length [mm]: 44
• Width [mm]: 47
• Thickness [mm]: 37
• Inner Diameter [mm]: 27
• Outer Diameter [mm]: 47
• Material: Rubber
• Fitting Position: Rear Axle
• Weight [kg]: 0.3
• Name: Kinnitus,stabilisaator
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 50
• Width [mm]: 48.2
• Thickness [mm]: 49.7
• Inner Diameter [mm]: 20.9
• Outer Diameter [mm]: 47
• Material: Rubber
• Fitting Position: Rear Axle both sides
• Manufacturer: DENCKERMANN FILTRY

• Fitting Position: Rear Axle both sides
• Inner Diameter [mm]: 21
• Material: Rubber
• Required quantity: 1
• Manufacturer: FAST

• Fitting Position: Rear Axle
• Inner Diameter [mm]: 23
• General Information: rubber bush; 23MM
• Manufacturer: VIKA

• for PR number: 1BA, 1BB, 1BJ, 2MD, 2MK, 2ML, 2MQ, 1BL, 2MT
• Fitting Position: Front
• Inner Diameter [mm]: 22
• Observe dimensions:
• Name: Paigutus - K„„ndmik VW P. T5 03- 22MM
• Manufacturer: MAX

• Fitting Position: outer, Rear Axle both sides
• Inner Diameter [mm]: 23
• Outer Diameter [mm]: 27
• Manufacturer: FAST

• Fitting Position: Front Axle
• Required quantity: 2
• Weight [g]: 57
• Inner Diameter [mm]: 24
• Name: IM 37641
• Manufacturer: ORIGINAL IMPERIUM

• Model Year from: 2016
• Model Year to: 2019
• Fitting Position: Front Axle
• Diameter [mm]: 21
• Weight [kg]: 0.074
• Inner Diameter [mm]: 21
• Packaging length [cm]: 5.2
• Packaging width [cm]: 4.9
• Packaging height [cm]: 4.2
• Manufacturer: FEBEST

• Engine Code: CXHA, CXFA
• Stabiliser Bar Diameter [mm]: 28
• Length [mm]: 44
• Width [mm]: 47
• Thickness [mm]: 37
• Inner Diameter [mm]: 27
• Outer Diameter [mm]: 47
• Material: Rubber
• Fitting Position: Rear Axle
• Weight [kg]: 0.3
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle, outer
• Stabiliser Bar Diameter [mm]: 22
• Mounting Type: Rubber Mount
• Inner Diameter [mm]: 21
• Outer Diameter [mm]: 22
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 819020110

• Fitting Position: Front Axle
• Mounting Type: Rubber Mount
• Inner Diameter [mm]: 22
• Width [mm]: 52
• SVHC: No SVHC present!
• Name: LU 819023210
• Manufacturer: FAG

• Stabiliser Bar Diameter [mm]: 25
• Required quantity: 2
• Inner Diameter [mm]: 24
• Fitting Position: Front Axle both sides
• Weight [kg]: 0.05
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: CXHA, CXFA
• Stabiliser Bar Diameter [mm]: 24
• Length [mm]: 53.5
• Width [mm]: 47.6
• Thickness [mm]: 41.7
• Inner Diameter [mm]: 23
• Outer Diameter [mm]: 48
• Material: Rubber
• Fitting Position: Rear Axle, inner
• Weight [kg]: 0.3
• Name: Kinnitus,stabilisaator
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle, outer
• Stabiliser Bar Diameter [mm]: 24
• Mounting Type: Rubber Mount
• Inner Diameter [mm]: 23
• Outer Diameter [mm]: 24
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 819021210

• Fitting Position: Front Axle both sides, inner
• Inner Diameter [mm]: 23
• Outer Diameter [mm]: 34
• Length [mm]: 52
• paired article number: 271055
• Weight [kg]: 0.05
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Observe dimensions:
• Fitting Position: Rear Axle Right, Rear Axle Left, outer
• Inner Diameter [mm]: 23
• Required quantity: 2
• Manufacturer: MEY

Name: Paigutus - K„„ndmik VW TRANSPORTER V (04/03-11/09), TRANSPORTER VI (04/15-?)

• Engine Code: CXHA, CXFA
• Stabiliser Bar Diameter [mm]: 24
• Inner Diameter [mm]: 23
• Outer Diameter [mm]: 27
• Fitting Position: Rear Axle, outer
• Weight [kg]: 0.054
• Name: Paigutus - K„„ndmik VW T. T5 03-
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Observe dimensions:
• Fitting Position: Rear Axle Right, Rear Axle Left, outer
• Inner Diameter [mm]: 26.5
• Required quantity: 2
• Name: Paigutus - K„„ndmik VW T. TRANSPORTER T5 27MM
• Manufacturer: MEY

• Engine Code: CXHA, CXFA
• Stabiliser Bar Diameter [mm]: 24
• Length [mm]: 53.5
• Width [mm]: 47.6
• Thickness [mm]: 41.7
• Inner Diameter [mm]: 23
• Outer Diameter [mm]: 48
• Material: Rubber
• Fitting Position: Rear Axle, inner
• Weight [kg]: 0.3
• Name: SW 30 10 1931
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CXHA, CXFA
• Stabiliser Bar Diameter [mm]: 24
• Inner Diameter [mm]: 23
• Outer Diameter [mm]: 27
• Fitting Position: Rear Axle, outer
• Weight [kg]: 0.054
• Name: SW 30 92 6541
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle, inner
• Stabiliser Bar Diameter [mm]: 24
• Mounting Type: Rubber Mount
• Inner Diameter [mm]: 23
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 819018110

• Fitting Position: Front Axle
• Diameter [mm]: 22
• Weight [kg]: 0.069
• Inner Diameter [mm]: 22
• Packaging length [cm]: 5.1
• Packaging width [cm]: 4.6
• Packaging height [cm]: 4.2
• Manufacturer: FEBEST

• Fitting Position: Rear Axle, inner
• Stabiliser Bar Diameter [mm]: 22
• Mounting Type: Rubber Mount
• Inner Diameter [mm]: 21
• Outer Diameter [mm]: 47
• Width 1 [mm]: 50
• Width 2 [mm]: 40
• SVHC: No SVHC present!
• Name: LU 819023510
• Manufacturer: FAG

• Engine Code: CXHA, CXFA
• Stabiliser Bar Diameter [mm]: 22
• Length [mm]: 43
• Width [mm]: 43
• Thickness [mm]: 46
• Inner Diameter [mm]: 21
• Material: Rubber
• Fitting Position: Rear Axle, outer
• Weight [kg]: 0.04
• Manufacturer: SWAG
• Name: SW 30 10 0076

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle, outer
• Stabiliser Bar Diameter [mm]: 24
• Mounting Type: Rubber Mount
• Inner Diameter [mm]: 27
• Outer Diameter [mm]: 47
• Width 1 [mm]: 44
• Width 2 [mm]: 33
• SVHC: No SVHC present!
• Manufacturer: FAG

• Engine Code: CXHA, CXFA
• Stabiliser Bar Diameter [mm]: 22
• Length [mm]: 50
• Width [mm]: 48.2
• Thickness [mm]: 49.7
• Inner Diameter [mm]: 20.9
• Outer Diameter [mm]: 47
• Material: Rubber
• Fitting Position: Rear Axle
• Weight [kg]: 0.5
• Name:
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Observe dimensions:
• Fitting Position: Rear Axle Right, Rear Axle Left, outer
• Inner Diameter [mm]: 21
• Required quantity: 2
• Manufacturer: MEY

Name: Paigutus - K„„ndmik VW T. T5 04/03-11/09, T6 04/15- 21MM

• Engine Code: CXHA, CXFA
• Stabiliser Bar Diameter [mm]: 24
• Inner Diameter [mm]: 23
• Outer Diameter [mm]: 27
• Fitting Position: outer, Rear Axle Left, Rear Axle Right
• Observe service information:
• Name: Kinnitus,stabilisaator
• Manufacturer: MAX

• Fitting Position: Front Axle
• Inner Diameter [mm]: 24
• General Information: rubber bush; 24MM
• Manufacturer: VIKA

• Engine Code: CXHA, CXFA
• Stabiliser Bar Diameter [mm]: 22
• Width [mm]: 52
• Thickness [mm]: 35
• Inner Diameter [mm]: 21
• Fitting Position: Front Axle
• Weight [kg]: 0.054
• Name: Paigutus - K„„ndmik VW P. T5 03-
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 7H-G-000 001, 7J-G-000 001
• Fitting Position: Front Axle both sides
• Required quantity: 2
• Inner Diameter [mm]: 22
• paired article number: VKDS 351019
• Name: SK VKDS351019
• Manufacturer: SKF

• Engine Code: CXHA, CXFA
• Stabiliser Bar Diameter [mm]: 28
• Length [mm]: 48
• Width [mm]: 50
• Thickness [mm]: 42
• Inner Diameter [mm]: 27
• Outer Diameter [mm]: 48
• Material: Rubber
• Fitting Position: Rear Axle, inner
• Weight [kg]: 0.039
• Name: Kinnitus,stabilisaator
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CXHA, CXFA
• Width [mm]: 105
• Bolt Hole Circle Ø [mm]: 13.5
• Material: Metal
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.19
• Name:
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CXHA, CXFA
• Stabiliser Bar Diameter [mm]: 22
• Length [mm]: 50
• Width [mm]: 48.2
• Thickness [mm]: 49.7
• Inner Diameter [mm]: 20.9
• Outer Diameter [mm]: 47
• Material: Rubber
• Fitting Position: Rear Axle
• Weight [kg]: 0.5
• Manufacturer: SWAG
• Name: SW 30 10 2419

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Inner Diameter [mm]: 22
• Outer Diameter [mm]: 35
• Length [mm]: 52
• Required quantity: 1
• Mounting Type: Rubber Mount
• Name: ALT 93654PAAL
• Manufacturer: ALTE AUTOMOTIVE

• Engine Code: CXHA, CXFA
• Stabiliser Bar Diameter [mm]: 22
• Width [mm]: 52
• Thickness [mm]: 35
• Inner Diameter [mm]: 21
• Fitting Position: Front Axle
• Weight [kg]: 0.054
• Manufacturer: SWAG
• Name: SW 30 92 6540

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CXHA, CXFA
• Stabiliser Bar Diameter [mm]: 23
• Inner Diameter [mm]: 22
• Fitting Position: Front Axle
• Mounting Type: Rubber Mount
• Weight [kg]: 0.05
• Name: Paigutus - K„„ndmik VW P. T5 03- 22MM
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CXHA, CXFA
• Stabiliser Bar Diameter [mm]: 25
• Inner Diameter [mm]: 24
• Fitting Position: Front Axle
• Weight [kg]: 0.05
• Name: Paigutus - K„„ndmik VW P. T5 03- 24MM
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CXHA, CXFA
• Stabiliser Bar Diameter [mm]: 28
• Length [mm]: 48
• Width [mm]: 50
• Thickness [mm]: 42
• Inner Diameter [mm]: 27
• Outer Diameter [mm]: 48
• Material: Rubber
• Fitting Position: Rear Axle, inner
• Weight [kg]: 0.039
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CXHA, CXFA
• Stabiliser Bar Diameter [mm]: 23
• Inner Diameter [mm]: 22
• Fitting Position: Front Axle
• Mounting Type: Rubber Mount
• Weight [kg]: 0.05
• Manufacturer: SWAG
• Name: SW 30 93 1347

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.