Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: Front Axle
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Outer Diameter [mm]: 136.5
- Outer Diameter 2 [mm]: 65
- Outer Diameter 1 [mm]: 85
- Width 2 [mm]: 48
- SVHC: No SVHC present!
- Lisainfo: 713 6109 80 FAG
- Additional information: 713 6109 80 FAG
- Fitting Position: Rear Axle
- Supplementary Article/Info 2: with integrated magnetic sensor ring
- Bearing Type: Ball Bearing
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 137
- Rim Hole Number: 5
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: MAX
- Fitting Position: Rear Axle
- Braking/Drive Dynamics: for vehicles with ABS
- Inner Diameter 1 [mm]: 32
- Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY
- Fitting Position: Rear Axle
- Parameter: DP2010.10.0089
- Laius (mm): 69
- Siseläbimõõt [mm]: 32
-
Piirangutega toode/piirangu info 2: koos integreeritud ABS-
anduriga - Manufacturer: DRIVE
- Fitting Position: Rear Axle
- Veljeaukude hulk: 5
-
Flants-Ø (mm): 136,
9 -
Piirangutega toode/piirangu info 2: koos integreeritud ABS-
anduriga - Quality class: PJ
- Name: Wheel hub
- Fitting Position: Rear Axle
- Width [mm]: 69
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 137
- Supplementary Article/Info 2: with integrated magnetic sensor ring
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: OPT
- Additional information: 102019A
- Lisainfo: 102019A
- Välisläbimõõt [mm]: 85
-
Installatsiooni pool: Esisild,
esisild vasakul, esisild paremal -
Seerianumber: KLP-
VW- 023 - Manufacturer: NTY
-
Name: NTY KLP-
VW- 023
Piirangutega toode/piirangu info 2: koos rattakeskmega, koos integreeritud magnetilise anduriga
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Engine Code: DPCA,
DADA - Block Separation:
- Width [mm]: 70
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 136
- Bolt Hole Circle Ø [mm]: 112
- Number of Holes: 5
- Bearing Type: Angular Ball Bearing
- Weight [kg]: 2.366
- Supplementary Article/Supplementary Info: with attachment material
- Manufacturer: FEBI BILSTEIN
Fitting Position: Front Axle, Rear Axle, Rear Axle Left, Rear Axle Right Supplementary Article/Info 2: with integrated magnetic sensor ring, Wheel Bearing integrated into wheel hub, with ABS sensor ring, with wheel hub General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Rim Hole Number: 5
- Supplementary Article/Info 2: with integrated ABS sensor
- Outer Diameter 1 [mm]: 85
- Outer Diameter [mm]: 136
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: MAX
- Fitting Position: Front Axle
- Veljeaukude hulk: 5
-
Flants-Ø (mm): 136,
4 - Välisläbimõõt 1 [mm]: 85
-
Piirangutega toode/piirangu info 2: koos integreeritud ABS-
anduriga - Quality class: PJ
- Name: Wheel hub
-
Engine Code: DPCA,
DADA - Block Separation:
- Width [mm]: 70
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 136
- Bolt Hole Circle Ø [mm]: 112
- Number of Holes: 5
- Bearing Type: Angular Ball Bearing
- Weight [kg]: 2.366
- Supplementary Article/Supplementary Info: with attachment material
- Name: SW 32 92 3320
- Manufacturer: SWAG
Fitting Position: Front Axle, Rear Axle, Rear Axle Left, Rear Axle Right Supplementary Article/Info 2: with integrated magnetic sensor ring, Wheel Bearing integrated into wheel hub, with wheel hub, with ABS sensor ring General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Rim Hole Number: 5
- Supplementary Article/Supplementary Info: with attachment material
- Supplementary Article/Info 2: with integrated wheel bearing
- Manufacturer: JP GROUP
- Lisainfo: Wheel Hub
- Additional information: Wheel Hub
- Number of Holes: 5
- Outer Diameter [mm]: 137
- Braking/Drive Dynamics: for vehicles with ABS
-
Width [mm]: 69,
70 - Inner Diameter [mm]: 32
- Supplementary Article/Supplementary Info: with attachment material
- Fitting Position: Rear Axle
- Weight [kg]: 2.549
- Manufacturer: VAICO
Supplementary Article/Info 2: with integrated magnetic sensor ring, with wheel bearing General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Right,
Left, Rear Axle, Front Axle - Number of Holes: 5
- Supplementary Article/Info 2: with rubber mount
- Inner Diameter 1 [mm]: 32
- Outer Diameter 1 [mm]: 136
- Width 1 [mm]: 69
- Rotation angle [°]: 180
- Tightening Torque [Nm]: 200
- Manufacturer: SNR
- Name: SN R154.54
- Välisläbimõõt [mm]: 136
- Siseläbimõõt [mm]: 32
-
Installatsiooni pool: Tagasild vasakul,
Tagasild paremal - Manufacturer: AIC
Piirangutega toode/piirangu info 2: koos integreeritud magnetilise anduriga, koos kruviga, koos rasvakattega, koos rattakeskmega Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Trim Level: REAR LR+RE
- for OE number: 8S0598611
- Number of bores: 32
- Width [mm]: 70
- Supplementary Article/Info 2: with integrated ABS sensor
- Diameter 2 [mm]: 5
- Name: DA KWD1005
- Manufacturer: DAYCO
- Fitting Position: Rear Axle
- Supplementary Article/Supplementary Info: with attachment material
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 137
- Bolt Hole Circle Ø [mm]: 112
- Number of Teeth, ABS ring: 86
- Rim Hole Number: 5
- Bearing Type: Ball Bearing
- Name: RATTARUMM
- Manufacturer: MEY
Supplementary Article/Info 2: with integrated magnetic sensor ring, with integrated wheel bearing General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.
- Fitting Position: Rear Axle
- Width [mm]: 69
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 137
- Mounting bores distance [mm]: 112
- Supplementary Article/Info 2: with integrated ABS sensor
- Net weight [kg]: 2.44
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: NK
- Fitting Position: Rear Axle
- Width [mm]: 69
- Inner Diameter [mm]: 32
- Flange Ø [mm]: 136.9
- Rim Hole Number: 5
- Supplementary Article/Info 2: with integrated ABS sensor
- Manufacturer: SKF
- Fitting Position: Rear Axle
- Siseläbimõõt [mm]: 32
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Tootja piirang: Durchmesser beachten
- Välisläbimõõt [mm]: 137
-
Laius (mm): 69,
5 - Manufacturer: METZGER
Piirangutega toode/piirangu info 2: koos rattakeskmega, koos integreeritud magnetilise anduriga
-
Fitting Position: Front Axle Left,
Front Axle Right - Block Separation:
- Installatsiooni pool: ees
- Välisläbimõõt [mm]: 136
-
Piduri-/sõidudünaamika: Sõidukitele koos ABS-
ga -
Kaal (kg): 3,
45 - Aukude arv: 5
- Ava Ø 1 (mm): 112
- Garantii: 4 aastat garantii
- Manufacturer: SKV GERMANY
- Name: CE 29SKV264
- Fitting Position: Front Axle
- Required quantity: 2
- Parameter: DP2010.10.0234
-
Piirangutega toode/piirangu info 2: koos integreeritud ABS-
anduriga - Välisläbimõõt 1 [mm]: 85
- Manufacturer: DRIVE
- Fitting Position: Front Axle
- Inner Diameter [mm]: 30
-
Outer Diameter [mm]: 137,
85 - Supplementary Article/Info 2: with integrated magnetic sensor ring
- Number of mounting bores: 3
- Number of Teeth on input shaft: 36
- Manufacturer: OPTIMAL
- Fitting Position: Front Axle
- Required quantity: 2
- Flange Ø [mm]: 136.4
- Rim Hole Number: 5
- Supplementary Article/Info 2: with integrated ABS sensor
- Outer Diameter 1 [mm]: 85
- Name: RATTALAAGRIKOMPLEKT
- Manufacturer: SKF
- Lisainfo: VKBA 7011 SKF
- Additional information: VKBA 7011 SKF
-
Fitting Position: Front Axle Left,
Front Axle Right - Trim Level: FRRE LR+FR
- for OE number: 8S0498625A
- Number of bores: 29
- Width [mm]: 67
- Supplementary Article/Info 2: with integrated ABS sensor
- Diameter 2 [mm]: 1
- Name: DA KWD1021
- Manufacturer: DAYCO
-
Engine Code: DPCA,
DADA -
Fitting Position: Front Axle Left,
Front Axle Right - Block Separation:
- Width [mm]: 48
- Thickness [mm]: 84
- Inner Diameter [mm]: 29
- Outer Diameter [mm]: 85
- Bolt Hole Circle Ø [mm]: 112
- Number of Holes: 5
- Bearing Type: Angular Ball Bearing
- Outer Diameter 1 [mm]: 65
- Outer Diameter 2 [mm]: 137
- Weight [kg]: 3.08
- Manufacturer: FEBI BILSTEIN
Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with wheel hub, with ABS sensor ring, with fastening material General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- jälgida mõõtu:
- Välisläbimõõt 1 [mm]: 85
- Välisläbimõõt 2 [mm]: 136
- Manufacturer: METZGER
Piirangutega toode/piirangu info 2: koos rattakeskmega, koos integreeritud magnetilise anduriga
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks