Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Quantity per packing unit: 25
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
- Thickness [mm]: 2
- Material: Steel
- Shape: C Shape
- Manufacturer: ELRING
- Lisainfo: 591.840 ELR
- Additional information: 591.840 ELR
-
External Thread [mm]: M14x1,
5 - Length [mm]: 16
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Length [mm]: 23.8
-
External Thread Size: M14 x 1,
5 - Quality/ Grade: 5.8
- Spanner Size: 19
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
- Surface: Phosphatized
- Screw length below head [mm]: 16
- Weight [kg]: 0.031
- Supplementary Article/Info 2: without seal ring
- Observe service information:
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Lisainfo: 99 90 3272 SWA Pikkus (mm): 23,8 Väliskeere [mm]: M14 x 1,5 Additional information: 99 90 3272 SWA Pikkus (mm): 23,8 Väliskeere [mm]: M14 x 1,5
- Quantity per packing unit: 25
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
- Thickness [mm]: 2
- Material: Copper
- Shape: C Shape
- DIN/ISO: 7603
-
Alternative Repair Kit: 017.736,
036.400, 505.550, 505.540 - Manufacturer: ELRING
- Lisainfo: 813.036 ELR
- Additional information: 813.036 ELR
- Quantity per packing unit: 25
- Thickness [mm]: 2
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 21
- Weight [kg]: 0.001
- Fitting Position: Oil Sump
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: CYVB
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
- Thickness [mm]: 2
- Manufacturer: AJUSA
-
Transmission Type: 6-
Speed Automatic Transmission - for PR number: G1A
- Quantity per packing unit: 10
- Inner Diameter [mm]: 11.7
- Outer Diameter [mm]: 16.5
- Thickness [mm]: 2.2
- Material: Sheet Steel
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Quantity per packing unit: 5
- Length [mm]: 23.8
-
External Thread [mm]: M14 x 1,
5 - Material: Steel
- Bolt Head-/Nut Design: Male Hex
- Supplementary Article/Info 2: without seal ring
- Thread Pitch [mm]: 1.5
- Fitting Position: engine sided
-
Thread Size: M14 x 1,
5 - Required quantity: 1
- Spanner Size: 19
- Thread Length [mm]: 17.5
- Surface: Phosphatized
- Weight [kg]: 0.032
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Material: Copper
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 21
- Thickness [mm]: 2
- Shape: C Shape
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Thread Size: M14x1,
5 - Length [mm]: 17
- Additionally required articles (article numbers): 259.150.100
- Spanner Size: SW19
- Manufacturer: FA1 FISCHER
- Length [mm]: 23.8
-
External Thread Size: M14 x 1,
5 - Quality/ Grade: 5.8
- Spanner Size: 19
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
- Surface: Phosphatized
- Screw length below head [mm]: 16
- Weight [kg]: 0.031
- Supplementary Article/Info 2: without seal ring
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 23.8
-
External Thread Size: M14 x 1,
5 - Quality/ Grade: 5.8
- Spanner Size: 19
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
- Surface: Phosphatized
- Screw length below head [mm]: 16
- Supplementary Article/Info 2: without seal ring
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 23.8
-
Thread Size: M14 x 1,
5 - Spanner Size: 19
- Bolt Head-/Nut Design: Male Hex
- Supplementary Article/Info 2: with seal ring
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
- Material: Copper
- Thickness [mm]: 1.5
- Packing Type: Blister Pack
- Manufacturer: CORTECO
- Length [mm]: 23.8
- Inner Diameter [mm]: 14.4
- Outer Diameter [mm]: 20
-
External Thread Size: M14 x 1,
5 - Quality/ Grade: 5.8
- Spanner Size: 19
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
- Surface: Phosphatized
- Screw length below head [mm]: 16
- Weight [kg]: 0.033
- Supplementary Article/Info 2: with seal ring
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Thread Size: M14x1,
5 - Length [mm]: 17
- Spanner Size: SW19
- Supplementary Article/Info 2: with seal ring
- Length [mm]: 24
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
-
External Thread Size: M14 x 1,
5 - Quality/ Grade: 5.8
- Spanner Size: 19
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
-
Surface: Zinc-
coated, Phosphatized - Screw length below head [mm]: 16
- Weight [kg]: 0.32
- Supplementary Article/Info 2: with seal ring
- Manufacturer: BLUEPRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Thickness [mm]: 2
- Inner Diameter [mm]: 14.4
- Outer Diameter [mm]: 19.8
- DIN/ISO: 7603
- Material: Steel
- Weight [kg]: 0.005
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 23.8
- Inner Diameter [mm]: 14.4
- Outer Diameter [mm]: 20
-
External Thread Size: M14 x 1,
5 - Quality/ Grade: 5.8
- Spanner Size: 19
- Bolt Head-/Nut Design: Male Hex
- Material: Steel
-
Surface: Zinc-
coated, Phosphatized - Screw length below head [mm]: 16
- Weight [kg]: 0.033
- Supplementary Article/Info 2: with seal ring
- Observe service information:
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Supplementary Article/Info 2: with seal ring
-
Surface: Zinc-
coated - Material: Steel
- Bolt Head-/Nut Design: Male Hex
- Length [mm]: 29.5
- Required quantity: 1
-
External Thread [mm]: M14 x 1,
5 - Spanner Size: 19
- Screw length below head [mm]: 22
- General Information: seal bolt with sealing ring
- Manufacturer: VIKA
- Quantity per packing unit: 10
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
- Thickness [mm]: 1.5
- Shape: A Shape
- Material: Copper
- Alternatively:
-
Thread Size: M14x1,
5x16 - Bolt Head-/Nut Design: Male Hex
- Spanner Size: 19 mm
- Alternative Repair Kit: 878.070
- Supplementary Article/Info 2: without seal ring
- Manufacturer: ELRING
- Model Year from: 2017
- Weight [kg]: 0.049
-
Thread Size: M24x1,
5 - Packaging length [cm]: 2.9
- Packaging width [cm]: 2.9
- Packaging height [cm]: 1.7
- Manufacturer: FEBEST
- Length [mm]: 15.3
- Outer Diameter [mm]: 19
-
External Thread Size: M14 x 1,
5 - Thread Length [mm]: 9
- Quality/ Grade: 4.8
- Spanner Size: T45
- Bolt Head-/Nut Design: Female Torx
- Material: Steel
-
Surface: Zink-
nickel coated - Screw length below head [mm]: 12
- Weight [kg]: 0.022
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FEBI BILSTEIN
- Additional information: FE103344
- Lisainfo: FE103344
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity per packing unit: 25
- Length [mm]: 15.3
- Outer Diameter [mm]: 19
-
External Thread Size: M14 x 1,
5 - Thread Length [mm]: 9
- Quality/ Grade: 4.8
- Spanner Size: T45
- Bolt Head-/Nut Design: Female Torx
- Material: Steel
-
Surface: Zink-
nickel coated - Screw length below head [mm]: 12
- Weight [kg]: 0.022
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FEBI BILSTEIN
- Additional information: FE103349
- Lisainfo: FE103349
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 16
-
Thread Size: M 14 x 1,
50 - Supplementary Article/Info 2: with seal ring
- Packing Type: Blister Pack
- Name: COU 220124S
- Manufacturer: CORTECO
- Length [mm]: 15.3
- Outer Diameter [mm]: 19
-
External Thread Size: M14 x 1,
5 - Thread Length [mm]: 9
- Quality/ Grade: 4.8
- Spanner Size: T45
- Bolt Head-/Nut Design: Female Torx
- Material: Steel
-
Surface: Zink-
nickel coated - Screw length below head [mm]: 12
- Weight [kg]: 0.022
- Supplementary Article/Info 2: with seal ring
- Name: SW 30 10 3344
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity per packing unit: 10
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
- Thickness [mm]: 2
- Shape: C Shape
- Material: Copper
- Alternatively:
- Manufacturer: FA1
- Quantity per packing unit: 100
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
- Thickness [mm]: 1.5
- Shape: A Shape
- Material: Copper
- Quantity per packing unit: 100
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
- Thickness [mm]: 2
- Shape: C Shape
- Material: Copper
- Quantity per packing unit: 100
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
- Thickness [mm]: 2
- Shape: C Shape
- Material: Steel
- Quantity per packing unit: 10
- Inner Diameter [mm]: 14
- Outer Diameter [mm]: 20
- Thickness [mm]: 2
- Shape: C Shape
- Alternatively:
- Material: Steel
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks