• Temperature range from [°C]: -40
• Temperature range to [°C]: 125
• Length [mm]: 54.7
• Weight [kg]: 0.029
• Socket colour: grey
• Supplementary Article/Supplementary Info: with seal rings
• Number of pins: 2
• Number of connectors: 2
• Manufacturer: METALCAUCHO

• Number of pins: 2
• Socket colour: grey
• Spanner Size: 19
• for OE number: 1484876
• Manufacturer: MEAT & DORIA

• Cable Length [mm]: 150
• Weight [kg]: 0.01
• Guarantee: 3 years guarantee
• Cable Cross Section [mm²]: 0.75
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Engine Code: B 4164 T2
• Spanner Size: 19
• for article number: 1.879.948, 1.879.949, 1.879.950
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS
• Additional information: EP 1.830.285
• Lisainfo: EP 1.830.285

• Engine Code: B 4164 T2
• Spanner Size: 19
• for article number: 7.7948, 7.7949, 7.7950
• Manufacturer: FACET

• Supplementary Article/Info 2: with integrated air temperature sensor
• Fabrication Number: ECM-PL-000
• Manufacturer: NTY
• Name: NTY ECM-PL-000

• Sensor Type: NTC Sensor
• Number of pins: 2
• Housing Colour: grey
• Manufacturer: FAE

• Fabrication Number: ESS-FR-003
• Manufacturer: NTY

• Pressure from [kPA]: 10
• Pressure to [kPA]: 307
• Fabrication Number: ECM-FR-005
• Manufacturer: NTY

• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.03
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV142
• Manufacturer: ESEN SKV

• Pressure from [kPA]: 11
• Pressure to [kPA]: 30
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Required quantity: 1
• Supplementary Article/Info 2: with integrated air temperature sensor
• Name: CZUJNIK CI—N. POWIETRZA
• Manufacturer: BRM

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 4
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV113

• Number of pins: 3
• Manufacturer: JPN

• Number of pins: 4
• Supplementary Article/Info 2: with integrated air temperature sensor
• Pressure from [kPA]: 20
• Pressure to [kPA]: 300
• Quality: OE EQUIVALENT
• for OE number: 1859079J62000
• Manufacturer: MEAT & DORIA

• Number of circuits: 3
• Version: mit Stoßverbinder
• Cable Length [mm]: 250
• Wire cross-section [mm²]: 0,75
• Manufacturer: METZGER

• Connector Shape: oval
• Number of pins: 4
• Sensor Type: NTC Sensor
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 2
• Cable Length [mm]: 450
• for OE number: 30711662
• Manufacturer: MEAT & DORIA

• Number of pins: 3
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Construction Year to: 08.2015
• Vehicle Identification Number (VIN) to: 100905
• Temperature range from [°C]: -40
• Temperature range to [°C]: 130
• Manufacturer: BOSCH
• Name: BS 0261230280

• Number of pins: 4
• Supplementary Article/Info 2: with integrated air temperature sensor
• Connector Shape: oval
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Manufacturer: FAST

• Mounting Type: Bolted
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of pins: 3
• Sensor Type: Impulse Sensor
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Length [mm]: 59
• Bore Diameter [mm]: 7.4
• Number of connectors: 4
• Material: Plastic
• Weight [kg]: 0.027
• Supplementary Article/Info 2: with seal ring
• for OE number: 12 35 029
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Manufacturer Restriction: Alfa Romeo, Ford, Opel
• Number of pins: 3
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable Cross Section [mm²]: 0.75
• Cable Length [mm]: 200
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabliparanduskomplekt, nukkvolli asendi andur
• Manufacturer: HBE

• Oxygen Sensor: Regulating Sensor
• Number of circuits: 4
• Manufacturer: KAMOKA

• Number of pins: 3
• Pressure from [kPA]: 27
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: DLP

• Length [mm]: 59
• Bore Diameter [mm]: 7.4
• Number of connectors: 4
• Material: Plastic
• Weight [kg]: 0.027
• for OE number: 12 35 029
• Supplementary Article/Info 2: with seal ring
• Name: SW 40 93 7055
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of connectors: 3
• Weight [kg]: 0.021
• for OE number: 1 913 600
• Name: SW 33 10 2195
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: B 4164 T2
• Length [mm]: 450
• Name: DETONATSIOONIANDUR
• Manufacturer: EPS

• Engine Code: B 4164 T2
• Length [mm]: 450
• Manufacturer: FACET

• Number of connectors: 3
• Weight [kg]: 0.021
• for OE number: 1 913 600
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pressure to [kPA]: 308
• Manufacturer: FAST

• Engine Code: B 4164 T2
• Sensor Type: Piezoelectric Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Name: Andur,ohuvotu rohk
• Manufacturer: MEY

• Sensor Type: Piezoelectric Sensor
• Cable Length [mm]: 440
• Number of pins: 2
• Name: Detonatsiooniandur
• Manufacturer: MEY

• Number of pins: 4
• Supplementary Article/Info 2: with integrated air temperature sensor
• Pressure from [kPA]: 20
• Pressure to [kPA]: 300
• for OE number: 55206797
• Manufacturer: MEAT&DORIA

• Oxygen Sensor: Switching-type Oxygen Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: ENERGY

• Number of pins: 4
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Manufacturer: VDO

• Cable Length [mm]: 450
• Manufacturer: FAE

• for OE number: 1 516 668
• Fabrication Number: EPP-FR-005
• Manufacturer: NTY

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Overall Length [mm]: 660
• Number of circuits: 4
• Fitting Position: after catalytic converter
• Fabrication Number: ESL-FR-009
• Manufacturer: NTY

Lisainfo: ENG. 2.0,2.3 FORD GALAXY 06-15,MONDEO IV 10-15,S-MAX 06-,VOLVO S60 II 10-15, S80 II 08-16,V60 I 10-14,V70 III 07-14, XC60 09-14/DIAGNOSTYCZNA, Dœ.CAœK.660MM Additional information: ENG. 2.0,2.3 FORD GALAXY 06-15,MONDEO IV 10-15,S-MAX 06-,VOLVO S60 II 10-15, S80 II 08-16,V60 I 10-14,V70 III 07-14, XC60 09-14/DIAGNOSTYCZNA, Dœ.CAœK.660MM

• Number of pins: 3
• Pressure from [kPA]: 20
• Pressure to [kPA]: 300
• Manufacturer: FAE

Manufacturer: NRF

• Construction Year from: 09.2011
• Pressure [Pa] from: 20,000
• Pressure [Pa] to: 300,000
• Voltage from [V]: 0.4
• Voltage to [V]: 4.65
• Number of pins: 3
• Fitting Position: Intake Manifold
• Manufacturer: METZGER

• Fitting Position: Front
• Oxygen Sensor: Diagnostic Probe
• Number of connectors: 4
• Length [mm]: 725
• Manufacturer: VERNET

• Number of pins: 3
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 08.2015
• Supplementary Article/Info 2: High Pressure Side
• Fuel Mixture Formation: Direct Injection
• Name: Andur,ktuserohk
• Manufacturer: MAX

• Oxygen Sensor: Switching-type Oxygen Sensor
• Voltage [V]: 12
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV

• Supplementary Article/Supplementary Info: with gasket/seal
• Number of mounting bores: 1
• Pressure [Pa] from: 11,000
• Pressure [Pa] to: 307,000
• Voltage [V]: 5
• Resistor [Ohm]: 2,080
• Number of pins: 4
• Sensor Type: NTC Sensor
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PP009400291
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Vehicle Identification Number (VIN) from: 100906
• Number of pins: 4
• Pressure from [kPA]: 20
• Pressure to [kPA]: 290
• Manufacturer: FAE

• Construction Year to: 08.2015
• Oxygen Sensor: Diagnostic Probe, Finger-type Sensor
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Number of pins: 4
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Manufacturer: FAE

• Engine Code: B 4164 T2
• Pressure from [kPA]: 10
• Pressure to [kPA]: 308
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Name: EP 1.993.244
• Manufacturer: EPS

• Engine Code: B 4164 T2
• Pressure from [kPA]: 10
• Pressure to [kPA]: 308
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Manufacturer: FACET

• Engine Code: B 4164 T2
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Name: EP 1.993.341
• Manufacturer: EPS

• Name: Andur,ktuserohk
• Manufacturer: MAG

• Engine Code: B 4164 T2
• Pressure from [kPA]: 11
• Pressure to [kPA]: 307
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Manufacturer: FACET

• Pressure from [kPA]: 10
• Pressure to [kPA]: 307.5
• Measuring Range from [V]: 0.25
• Measuring Range to [V]: 4.75
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PP013112081
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 08.2015
• Supplementary Article/Info 2: High Pressure Side
• Fuel Mixture Formation: Direct Injection
• Name: ANDUR,KšTUSEROHK
• Manufacturer: BOS

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 4
• Housing Type: without housing
• Name: Ohumassimootja
• Manufacturer: MAX

• Oxygen Sensor: Diagnostic Probe, Planar Sensor, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 630
• Manufacturer: DELPHI
• Name: DE ES20443-12B1

• for OE number: C2G2675
• Manufacturer: MEAT & DORIA

• Number of pins: 2
• Cable Length [mm]: 450
• Tightening Torque [Nm]: 20
• Sensor Type: Piezoelectric Sensor
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PG009108731
• Manufacturer: HELLA

SVHC: 1317-36-8; Lead monoxide (lead oxide), 12060-00-3; Lead titanium trioxide, 7439-92-1; Lead Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 08.2015
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 660
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Oxygen Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Number of pins: 4
• Cable Length [mm]: 600
• Quality: OE EQUIVALENT
• for OE number: 1327547
• Manufacturer: MEAT&DORIA

• Measuring Range from [kPa]: 10
• Measuring Range to [kPa]: 307.5
• Measuring Range from [V]: 0.25
• Measuring Range to [V]: 4.75
• Number of connectors: 3
• Manufacturer: VERNET

• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Oxygen Sensor: Planar Sensor, Heated, Thread pre-greased
• Supplementary Article/Info 2: without plug
• Cable Length [mm]: 210
• Number of circuits: 4
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fabrication Number: EFP-VV-000
• Number of pins: 3
• Manufacturer: NTY
• Name: NTY EFP-VV-000

• Construction Year to: 08.2015
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Construction Year from: 09.2011
• Number of pins: 3
• Connector Shape: oval
• Socket colour: black
• Fuel Type: Petrol
• Supplementary Article/Info 2: High Pressure Side
• for OE number: 1729436
• Manufacturer: MEAT&DORIA

• Number of pins: 3
• Fitting Position: Fuel Line
• Supplementary Article/Info 2: Low Pressure Side
• Manufacturer: METZGER

Installation Information: Note the installation instructions of the original manufacturer during assembly.

• Construction Year from: 10.2013
• Construction Year to: 05.2015
• Engine Code: B4164T2
• Line insulation design: with silicone-coated woven-fibre insulation
• Connector Shape: round
• Length [mm]: 730
• Thread Size: M18 x 1,5
• Conductor Number: 4
• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Number of circuits: 4
• Version: PLANAR
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Voltage [V]: 12
• Manufacturer: FAST

• Mounting Type: Bolted
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: Ohumassimootja
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Housing Type: without housing
• Number of pins: 4
• Plug Type: Male
• Housing Colour: black/silver
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Name: OHUMASSIMOOTJA
• Manufacturer: DLP

• Quality: OE EQUIVALENT
• for OE number: 9674958880
• Manufacturer: MEAT & DORIA

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 4
• Housing Type: without housing
• Name: Ohumassimootja
• Manufacturer: BRM

• Number of circuits: 5
• Length [mm]: 630
• Conductor Number: 5
• Cable Length [mm]: 630
• Oxygen Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Number of pins: 4
• Cable Length [mm]: 650
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Manufacturer: VALEO

Oxygen Sensor: Diagnostic Probe, Planar Sensor, Thread pre-greased, Heated Fitting Position: before catalytic converter, after catalytic converter

• for OE number: 30757556, 1302222
• Thread Size: M18x1.5
• Cable Length [mm]: 725
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 126
• Gross Weight [g]: 159
• Manufacturer: DENSO
• Name: DN DOX-2068
• Quality class: Q

Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor

• Fitting Position: Exhaust Manifold, before catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Connector Shape: D Shape
• Number of pins: 6
• Number of circuits: 5
• Socket colour: black
• Thread Size: M18 x 1,5
• Length [mm]: 400
• for OE number: 1 688 499
• Conductor Number: 5
• Cable Length [mm]: 480
• Oxygen Sensor: Regulating Sensor, Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Oxygen Sensor: Switching-type Oxygen Sensor
• Voltage [V]: 12
• Colour: red
• Guarantee: 3 years guarantee
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• General Information: Sold in Hitachi brand: printing and packaging
• Manufacturer: HUCO
• Name: HI 2505089