• Fitting Position: Front Axle both sides
• Number of Teeth: 49
• Material: Steel
• Inner Diameter [mm]: 72
• Outer Diameter [mm]: 82
• Fabrication Number: NZA-VV-002
• Manufacturer: NTY
• Name: NTY NZA-VV-002

• Fitting Position: Rear Axle
• Sensor Type: Hall Sensor
• Number of connectors: 2
• Manufacturer: JP GROUP
• Lisainfo: Sensor, wheel speed
• Additional information: Sensor, wheel speed

• Fitting Position: Front Axle Left, Front Axle Right
• Sensor Type: Hall Sensor
• Braking/Drive Dynamics: for vehicles without ESP
• Manufacturer: JP GROUP
• Lisainfo: Sensor, wheel speed
• Additional information: Sensor, wheel speed

• Fitting Position: Front Axle both sides
• Width [mm]: 8.6
• Number of Teeth: 48
• Outer Diameter [mm]: 82
• Inner Diameter [mm]: 72
• Name: ANDUR,ABS
• Manufacturer: MAX
• Lisainfo: 27-0357
• Additional information: 27-0357

• Fitting Position: Front Axle both sides
• Number of Teeth: 48
• Inner Diameter [mm]: 71.9
• Thickness [mm]: 8.6
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-MZ-019
• Manufacturer: NTY

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-FR-011
• Manufacturer: NTY
• Name: NTY HCA-FR-011

• Fitting Position: Rear Axle
• Sensor Type: Hall Sensor
• Number of pins: 2
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front Axle
• Sensor Type: Hall Sensor
• Number of pins: 2
• Connector Shape: angular
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Width [mm]: 8.6
• Outer Diameter [mm]: 81.3
• Inner Diameter [mm]: 71.9
• Fitting Position: Front Axle both sides
• Number of Teeth, ABS ring: 48
• Weight [kg]: 0.06
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Braking/Drive Dynamics: for vehicles with ABS
• Supplementary Article/Info 2: without cable
• Fabrication Number: HCA-MZ-018
• Manufacturer: NTY

• Fitting Position: Rear Axle
• Sensor Type: Active sensor
• Supplementary Article/Info 2: without cable
• Fabrication Number: HCA-FR-010
• Manufacturer: NTY

• Fitting Position: Front Axle both sides
• Inner Diameter [mm]: 71.9
• Width [mm]: 8.6
• Outer Diameter [mm]: 81.5
• Number of Teeth, ABS ring: 48
• Name: ANDUR,ABS
• Manufacturer: TRI
• Lisainfo: VOLVO
• Additional information: VOLVO

• Fitting Position: Rear Axle
• Manufacturer: MAGNETI MARELLI
• Name: MM MWSS046

• Fitting Position: Front Axle
• for OE number: 3M5T2B372AB
• Number of pins: 2
• Number of mounting bores: 1
• Manufacturer: MAGNETI MARELLI
• Name: MM MWSS045

• Installatsiooni pool: esisild mõlemapoolselt
• Ühenduste arv: 2
• Manufacturer: JPN

• Required quantity: 2
• Fitting Position: Front Axle
• Fitting Depth [mm]: 25
• Number of pins: 2
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX
• Lisainfo: 1223620/MG
• Additional information: 1223620/MG

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) to: 191726
• Number of pins: 2
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Rear Axle
• Required quantity: 2
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Sensor Type: Hall Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA ELEKTRYKA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Front Axle both sides
• Manufacturer: JAPKO

• Fitting Position: Rear Axle
• Sensor Type: Active sensor
• Fitting Depth [mm]: 14
• Manufacturer: OPTIMAL ZAWIESZENIE

• Vehicle Identification Number (VIN) to: 192315
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Length [mm]: 55
• Sensor Type: Hall Sensor
• Fitting Depth [mm]: 24.5
• Fitting Position: Front Axle Right, Front Axle Left
• for OE number: 1223620
• Manufacturer: MEAT&DORIA

• Required quantity: 2
• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) from: 192316
• Supplementary Article/Info 2: without cable
• Manufacturer: DENCKERMANN FILTRY

• Required quantity: 2
• Fitting Position: Rear Axle
• Sensor Type: Hall Sensor
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Front Axle Left
• Fabrication Number: HCA-VV-014
• Manufacturer: NTY

• Fitting Position: Front Axle both sides
• Manufacturer: ASHIKA

• Required quantity: 2
• Fitting Position: Rear Axle
• Supplementary Article/Info 2: without cable
• Manufacturer: DENCKERMANN FILTRY

• Required quantity: 2
• Fitting Position: Rear Axle
• Supplementary Article/Info 2: without cable
• Name: CZUJNIK ABS FORD T. C-MAX 03- LE/PR
• Manufacturer: BRM

• Fitting Position: Rear Axle both sides
• Manufacturer: JAPKO

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Manufacturer: AUTO-GH

• Fitting Position: Front Axle Left, Front Axle Right
• Sensor Type: Active sensor
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Braking/Drive Dynamics: for vehicles without ESP
• Fitting Depth [mm]: 25
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0021

• Fitting Position: Rear Axle
• Overall Length [mm]: 38
• Length [mm]: 14
• Sensor Type: Active sensor
• Socket colour: black
• paired article number: 30131
• Weight [kg]: 0.08
• Manufacturer: A.B.S.

• Required quantity: 2
• Fitting Position: Front Axle
• Supplementary Article/Info 2: without cable
• Name: CZUJNIK ABS FORD P. MONDEO IV
• Manufacturer: BRM

• Installatsiooni pool: Tagasild mõlemapoolselt
• Ühenduste arv: 2
• Manufacturer: JPN

• Fitting Position: Front Axle both sides
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: JPA

• Fitting Position: Rear Axle both sides
• Manufacturer: ASHIKA

• Fitting Position: Rear Axle Right, Rear Axle Left
• Number of pins: 2
• Sensor Type: Active sensor
• Supplementary Article/Info 2: without cable
• Fitting Depth [mm]: 14
• Vehicle Equipment: for vehicles without park distance control
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0020

• Fitting Position: Front Axle
• Värv: must
• Anduritüüp: Aktiivne andur
• Pikkus (mm): 25
• Manufacturer: JPN

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Manufacturer: AUTO-GH

• Length [mm]: 38
• Sensor Type: Active sensor
• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: FAST

• Engine Code: E400V1
• Production date to: 2011
• Fitting Position: Rear Axle
• Weight [kg]: 0.022
• Packaging length [cm]: 3.9
• Packaging width [cm]: 2.6
• Packaging height [cm]: 2.1
• Colour Coding: black
• Manufacturer: FEBEST

• Fitting Position: Rear Axle
• Number of pins: 2
• Plug Type: Male
• Connector Shape: oval
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Weight [kg]: 0.02
• Colour: black
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 06SKV004
• Manufacturer: ESEN SKV

• Fitting Position: Front Axle
• Required quantity: 2
• Sensor Type: Hall Sensor
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA ELEKTRYKA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Front Axle
• Length [mm]: 43
• Sensor Type: Active sensor
• Manufacturer: KAVO

• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: without cable
• Length [mm]: 42
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Length [mm]: 14
• Sensor Type: Active sensor
• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: FAST

• Fitting Position: Front Axle Left, Front Axle Right
• Alternatively:
• Number of pins: 2
• Fitting Depth [mm]: 24.5
• Weight [kg]: 0.01
• Alternative Repair Kit: 560052
• Resistor M[ohm]: 1.3
• Manufacturer: ERA

• Fitting Position: Front Axle
• Overall Length [mm]: 55
• Length [mm]: 25
• Sensor Type: Active sensor
• Socket colour: black
• paired article number: 30130
• Weight [kg]: 0.08
• Manufacturer: A.B.S.

• Fitting Position: Front Axle
• Rated Voltage [V]: 12
• Guarantee: 5 years guarantee
• Manufacturer: HUCO
• Name: HU 131655

• Engine Code: E400V1
• Fitting Position: Rear Axle Left, Rear Axle Right
• Required quantity: 2
• Sensor Length [mm]: 14
• Name: EP 1.960.018
• Manufacturer: EPS

• Engine Code: E400V1
• Fitting Position: Rear Axle Left, Rear Axle Right
• Required quantity: 2
• Sensor Length [mm]: 14
• Manufacturer: FACET

• Fitting Position: Front Axle
• Overall Length [mm]: 55
• Braking/Drive Dynamics: for vehicles with ABS
• Sensor Type: Active sensor
• Rated Voltage [V]: 12
• Weight [kg]: 0.008
• Socket colour: black
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: E400V1
• Quantity: 2
• Fitting Position: Rear Axle Left, Rear Axle Right
• Braking/Drive Dynamics: for vehicles with ABS
• Number of connectors: 2
• Rated Voltage [V]: 12
• Weight [kg]: 0.01
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle
• Required quantity: 2
• Fitting Depth [mm]: 25
• Number of pins: 2
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Sensor Type: Active sensor
• Supplementary Article/Info 2: without cable
• Number of pins: 2
• Fitting Position: Rear Axle
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MEY

• Required quantity: 2
• Sensor Type: Hall Sensor
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Fitting Position: Rear Axle
• Manufacturer: FAE

• Engine Code: E400V1
• Fitting Position: Front Axle Left, Front Axle Right
• Required quantity: 2
• Sensor Length [mm]: 24.9
• Name: EP 1.960.005
• Manufacturer: EPS

• Engine Code: E400V1
• Fitting Position: Front Axle Left, Front Axle Right
• Required quantity: 2
• Sensor Length [mm]: 24.9
• Manufacturer: FACET

• Fitting Position: Rear Axle
• Sensor Type: Active sensor
• Supplementary Article/Info 2: without cable
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Braking/Drive Dynamics: for vehicles with ESP
• Sensor Type: Hall Sensor
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Corresponds to the original part in colour: blue
• Fitting Position: Front Axle
• Manufacturer: FAE

• Fitting Position: Front Axle Left, Front Axle Right
• Block Separation:
• Number of connectors: 2
• Weight [kg]: 0.009
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of connectors: 2
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.007
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Quantity: 2
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: DLP

• Fitting Position: Rear Axle
• Required quantity: 2
• Voltage [V]: 12
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU012039971

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Front Axle Left, Front Axle Right
• Block Separation:
• Number of connectors: 2
• Weight [kg]: 0.009
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Required quantity: 2
• Fitting Depth [mm]: 14.3
• Number of pins: 2
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Number of connectors: 2
• Fitting Position: Rear Axle Left, Rear Axle Right
• Name: SW 50 94 6316
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Fitting Position: Brake Booster
• Brake System: ATE
• Name: Pedaali asendi andur, piduripedaal
• Manufacturer: ATE

• Required quantity: 2
• Voltage [V]: 12
• Fitting Position: Front Axle
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU012039961

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Front Axle
• Quantity: 2
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: DLP

• Fitting Position: Rear Axle
• Manufacturer: PIERBURG

• Engine Code: E400V1
• Fitting Position: Front Axle
• Manufacturer: PIERBURG

• Fitting Position: Front Axle, Front Axle Left
• paired article number: GH-704814H
• Manufacturer: AUTO-GH

• Fitting Position: Front Axle
• Number of pins: 2
• Corresponds to the original part in colour: black
• Manufacturer: METZGER

• Construction Year from: 08.2011
• Fitting Position: Front Axle Right
• Manufacturer: BOSCH

• Fitting Position: Front Axle
• Required quantity: 2
• Net weight [kg]: 0.01
• Manufacturer: NK

• Fitting Position: Front Axle Left, Front Axle Right
• Number of pins: 2
• Fitting Depth [mm]: 24.5
• Weight [kg]: 0.01
• Resistor M[ohm]: 1.3
• Manufacturer: ERA

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Fitting Position: Brake Booster
• Connector Shape: D Shape
• Number of pins: 3
• for OE number: 163 540 12 17
• Brake System: ATE
• Weight [kg]: 0.064
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.