• Weight [kg]: 0.022
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: Inductive Sensor
• Number of pins: 2
• Fabrication Number: ECP-VV-002

• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: MAG

• Number of pins: 4
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Number of pins: 4
• Fabrication Number: ECM-VV-004
• Manufacturer: NTY

• Number of pins: 4
• Pressure from [kPA]: 25
• Pressure to [kPA]: 242
• Weight [kg]: 0.04
• Pressure from [bar]: 0.25
• Pressure to [bar]: 2.42
• Warranty: 3 years warranty
• Voltage from [V]: 0.5
• Voltage to [V]: 4.5
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Number of pins: 2
• Housing Colour: black
• Sensor Type: NTC Sensor
• Manufacturer: FAE

• Pressure from [kPA]: 26
• Fabrication Number: ECM-VV-003
• Manufacturer: NTY

Fabrication Number: ECM-VV-000

• Engine Code: B 5254 T7
• for article number: 1.880.846
• Name: EP 1.830.346
• Manufacturer: EPS

• Required quantity: 2
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Vehicle Identification Number (VIN) to: 38999
• Required quantity: 1
• Manufacturer: BREMI

• Fitting Position: Charge Air Cooler
• Vehicle Identification Number (VIN) from: 39000
• Number of pins: 4
• Sensor Type: NTC Sensor
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 4
• Weight [kg]: 0.043
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Colour: black
• Number of connectors: 3
• Number of pins: 3
• Weight [kg]: 0.02
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) to: 38999
• Number of pins: 4
• Pressure from [kPA]: 26
• Manufacturer: DELPHI
• Name: DE PS10137

• Construction Year from: 08.2007
• Vehicle Identification Number (VIN) from: 39000
• Number of pins: 4
• Supplementary Article/Info 2: with integrated air temperature sensor
• for OE number: 6G9N 12B676 AB
• Manufacturer: MEAT&DORIA

• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 20
• Resistor [Ohm]: 900
• Manufacturer: ERA

• Number of pins: 4
• Pressure from [kPA]: 20
• Pressure to [kPA]: 300
• Manufacturer: FAE

• Engine Code: B 5254 T7
• Vehicle Identification Number (VIN) from: 39000
• Number of pins: 4
• Name: Andur,ohuvotu rohk
• Manufacturer: MEY

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV909

• Number of pins: 3
• Supplementary Article/Info 2: without cable

• Construction Year from: 08.2007
• Fitting Position: after catalytic converter
• for OE number: 9487146
• Lambda Sensor: Finger probe
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Construction Year from: 08.2007
• Vehicle Identification Number (VIN) from: 39000
• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: BOS

• Engine Code: B 5254 T7
• Vehicle Identification Number (VIN) to: 38999
• Number of pins: 4
• Name: Andur,ohuvotu rohk
• Manufacturer: MEY

• Engine Code: B 5254 T7
• Vehicle Identification Number (VIN) from: 39000
• Pressure from [kPA]: 22
• Pressure to [kPA]: 305
• Output Voltage, from [V]: 0.41
• Output Voltage, up to [V]: 4.735
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: EPS

• Quantity: 1
• Cable Length [mm]: 265
• Number of pins: 4
• Manufacturer: DELPHI

• Sensor Type: Inductive Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Resistor [Ohm]: 900
• Weight [kg]: 0.04
• Manufacturer: VALEO

• Engine Code: B 5254 T7
• Vehicle Identification Number (VIN) to: 38999
• Pressure from [kPA]: 11
• Pressure to [kPA]: 254
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Name: EP 1.993.078
• Manufacturer: EPS

• Construction Year from: 08.2007
• Name: DETONATSIOONIANDUR
• Manufacturer: BOS

• Construction Year to: 07.2010
• Number of pins: 4
• Pressure [Pa] from: 22,000
• Pressure [Pa] to: 305,000
• Version: AM
• Manufacturer: METZGER

• Fitting Position: Front
• Exhaust System: after catalytic converter
• Lambda Sensor: Diagnostic Probe
• Length [mm]: 770
• Number of connectors: 4
• Manufacturer: VERNET

• Number of pins: 4
• Weight [kg]: 0.045
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 08.2007
• Supplementary Article/Info 2: Low Pressure Side
• Fuel Mixture Formation: Manifold Injection/Direct Injection
• Name: ANDUR,KšTUSEROHK
• Manufacturer: BOS

• Vehicle Identification Number (VIN) from: 39000
• Pressure from [kPA]: 22
• Pressure to [kPA]: 305
• Measuring Range from [V]: 0.41
• Measuring Range to [V]: 4.735
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PP013112041
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Lambda Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 765
• Number of circuits: 4
• Weight [kg]: 0.15
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV639

• Construction Year to: 01.2011
• Voltage [V]: 12
• Housing Type: with housing
• Number of pins: 5
• Weight [kg]: 0.26
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Operating Mode: Electric
• Manufacturer: MAGNETI MARELLI

• Construction Year from: 08.2008
• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Construction Year from: 08.2007
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• for OE number: 9487146
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year from: 08.2007
• Vehicle Identification Number (VIN) to: 38999
• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: BOS

• Fitting Position: after catalytic converter
• Required quantity: 1
• Lambda Sensor: Diagnostic Probe
• Cable Length [mm]: 660
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: Lambda andur
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fuel Mixture Formation: Direct Injection
• Weight [kg]: 0.036
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 08.2007
• Weight [kg]: 0.04
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 30650109, 1367825
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 770
• Number of pins: 4
• Weight [g]: 131
• Gross Weight [g]: 164
• Manufacturer: DENSO
• Name: DN DOX-2021

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
C70 I COUPE, 03.97-0
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
C70 I COUPE, 03.97-0
(kvaliteediklass: Q)"

• Construction Year from: 08.2007
• Number of pins: 4
• Connector Shape: oval
• Number of mounting bores: 1
• Fuel Mixture Formation: Intake Manifold Injection
• Supplementary Article/Info 2: Low Pressure Side
• Pressure from [kPA]: 50
• Pressure to [kPA]: 500
• for OE number: 31251446
• Manufacturer: MEAT&DORIA

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Colour: red
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Recommended additional repairs: Air Filter
• New Part:
• Used part return not required:
• Weight [kg]: 0.265
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 08.2007
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• for OE number: 9487146
• Number of circuits: 4
• Overall Length [mm]: 770
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• for article number: 86340
• Manufacturer: MEAT&DORIA

• Housing Type: with housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Name: OHUMASSIMOOTJA
• Manufacturer: DLP

• Lambda Sensor: Regulating Probe, Lambda Sensor
• Construction Year from: 08.2007
• Voltage [V]: 12
• Length [mm]: 750
• Number of circuits: 5
• Weight [kg]: 0.16
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV856

• Lambda Sensor: Regulating Probe, Lambda Sensor
• Construction Year from: 08.2007
• Voltage [V]: 12
• Length [mm]: 580
• Number of circuits: 5
• Weight [kg]: 0.16
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV853

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Length [mm]: 1,000
• Number of circuits: 5
• Weight [kg]: 0.19
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV854

• Construction Year from: 08.2007
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Thread pre-greased
• Overall Length [mm]: 1,230
• Number of pins: 5
• Recommended change interval [km]: 250,000
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Manufacturer: BREMI

• Construction Year to: 01.2011
• Number of pins: 5
• Supplementary Article/Info 2: with integrated air temperature sensor
• Connector Shape: oval
• Sensor Type: Hot-film Sensor
• Voltage [V]: 12
• Length [mm]: 182
• Width [mm]: 165
• Height [mm]: 125
• Weight [kg]: 0.32
• Name: OHUMASSIMOOTJA
• Manufacturer: VAL

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.15
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Technical Information: Universal
• Manufacturer: SKV GERMANY

• Required quantity: 1
• Mounting Type: Pipe-neck
• Number of pins: 5
• Suction pipe connector diameter [mm]: 80
• Assy./disassy. by qualified personnel required!:
• SVHC: 1317-36-8; Lead monoxide (lead oxide)
• Name: Ohumassimootja
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: B 5254 T7
• Required quantity: 1
• Housing Type: with housing
• Length [mm]: 100
• Inner Diameter [mm]: 80
• Outer Diameter [mm]: 80
• Name: EP 1.991.332
• Manufacturer: EPS

• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Construction Year from: 08.2007
• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Overall Length [mm]: 975
• Number of pins: 4
• Weight [kg]: 0.162
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 08.2007
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• for OE number: 30751545, 9487150
• Block Separation:
• Number of circuits: 5
• Overall Length [mm]: 580
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Engine Code: B 5254 T7
• Operating Mode: Electric
• Voltage [V]: 12
• Name: OHUMASSIMOOTJA
• Manufacturer: PIE

• Construction Year from: 08.2007
• Manufacturer: METZGER