• Thread Size: "1/4"" x 18 NPT"
• Colour Coding: green
• Number of pins: 1
• Switch Pressure [bar]: 0.25
• Spanner Size: 24
• for OE number: 1363512
• Manufacturer: DELLO AUTOMEGA

• Colour: green
• Thread Size: 1/4" x 18 NPT
• Number of pins: 1
• Switch Pressure [bar]: 0.25
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: B 4164 T
• Pressure [bar]: 0
• Thread Size: 1/4-18NPT
• Spanner Size: 24
• Name: OLISURVELšLITUS
• Manufacturer: EPS

Manufacturer: CALORSTAT BY VERNET

• Switch Pressure [bar]: 0.25
• Thread Size: 1/4x18 NPTF
• Sensor Type: Closed-type Sensor
• Manufacturer: VERNET

• Supplementary Article/Supplementary Info: with seal
• Number of pins: 2
• Corresponds to the original part in colour: grey
• Fabrication Number: ECT-LR-000
• Manufacturer: NTY
• Name: NTY ECT-LR-000

• Spanner Size: 19
• Number of pins: 2
• Socket colour: grey
• Manufacturer: FAST

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: rectangular
• Number of pins: 2
• for OE number: 3L8A12A648BA
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Pressure [bar]: 0.25
• Thread Size: 1/4'' x 18 NPT
• Number of pins: 1
• Technical Information Number: circuit N.C.
• Manufacturer: ERA

• External Thread Size: 1/4" - 18 NPTF
• Spanner Size: 24
• Number of connectors: 1
• Colour: green
• Shifting Points [bar]: 0.25
• Weight [kg]: 0.03
• Name: OLISURVELšLITUS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• External Thread Size: 1/4" - 18 NPTF
• Spanner Size: 24
• Number of connectors: 1
• Colour: green
• Shifting Points [bar]: 0.25
• Weight [kg]: 0.03
• Manufacturer: SWAG
• Name: SW 50 92 6579

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of connectors: 1
• Weight [kg]: 0.04
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Connector Shape: rectangular
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: S19
• Thread Size: not have
• Name: NI 207048
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Voltage [V]: 12
• Thread Type: with inch thread
• Pressure [bar]: 0.25
• Combi Switch Function: Normally Closed Contact
• Thread Size: 1/4-18NPT
• Colour: green
• Spanner Size: 24
• Number of pins: 1
• Assy./disassy. by qualified personnel required!:
• Name: HE 6ZL009600081
• Manufacturer: HELLA

• Engine Code: B 4164 T
• Operating Mode: Mechanical
• Name: LšLITI,PIDURDAMINE(MOOTORI JUHTIMINE)
• Manufacturer: EPS

• Engine Code: B 4164 T
• Spanner Size: 19
• for article number: 1.879.948, 1.879.949, 1.879.950
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS
• Additional information: EP 1.830.285
• Lisainfo: EP 1.830.285

• Sensor Type: NTC Sensor
• Supplementary Article/Supplementary Info: with retaining spring
• Supplementary Article/Info 2: with seal ring
• Number of pins: 2
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: MEY

• Spanner Size: 17
• Fastening Type: Plug-on
• Number of pins: 2
• Supplementary Article/Info 2: without seal ring
• Weight [kg]: 0.04
• Manufacturer: VALEO

• Fabrication Number: ESS-FR-003
• Manufacturer: NTY

• Supplementary Article/Supplementary Info: with seal
• Number of pins: 2
• Corresponds to the original part in colour: grey
• Mounting Type: Bracket mounting
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT009309781

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Colour: grey
• Number of pins: 2
• Supplementary Article/Supplementary Info: with seal
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Sensor Type: Hall Sensor
• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 24
• Manufacturer: ERA

• Number of pins: 2
• Cable Length [mm]: 450
• for OE number: 98MF 12A699 BA, 30711662
• Manufacturer: MEAT&DORIA

• Engine Code: B 4164 T
• Name: EP 1.953.743
• Manufacturer: EPS

• Engine Code: B 4164 T
• Supplementary Article/Info 2: with control switch
• Mounting Type: Clipped
• Number of pins: 2
• Operating Mode: Electric
• Combi Switch Function: Normally Open Contact
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6DD008622861

• Engine Code: B 4164 T
• Vehicle Identification Number (VIN) to: 87000
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6DD010966421

• Colour: black
• Sensor Type: NTC Sensor
• Number of pins: 2
• Number of connectors: 2
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Weight [kg]: 0.014
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Manufacturer: DELPHI

• Supplementary Article/Info 2: with plug
• Number of wires (repair kit, cable set): 2
• Manufacturer: ABA

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. Name: Kaabli remondikomplekt, jahutusvedeliku temperatuuri andur

Fabrication Number: ESS-VV-001

• Engine Code: B 4164 T
• Quantity: 2
• Weight [kg]: 0.061
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Required quantity: 2
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Mounting Type: Bolted
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of pins: 3
• Sensor Type: Impulse Sensor
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Manufacturer Restriction: Alfa Romeo, Ford, Opel
• Number of pins: 3
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable Cross Section [mm²]: 0.75
• Cable Length [mm]: 200
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabliparanduskomplekt, nukkvolli asendi andur
• Manufacturer: HBE

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Engine Code: B 4164 T
• Required quantity: 2
• Length [mm]: 450
• Name: DETONATSIOONIANDUR
• Manufacturer: EPS

• Cable Length [mm]: 450
• Manufacturer: FAE

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Overall Length [mm]: 660
• Number of circuits: 4
• Fitting Position: after catalytic converter
• Fabrication Number: ESL-FR-009
• Manufacturer: NTY

Lisainfo: ENG. 2.0,2.3 FORD GALAXY 06-15,MONDEO IV 10-15,S-MAX 06-,VOLVO S60 II 10-15, S80 II 08-16,V60 I 10-14,V70 III 07-14, XC60 09-14/DIAGNOSTYCZNA, Dœ.CAœK.660MM Additional information: ENG. 2.0,2.3 FORD GALAXY 06-15,MONDEO IV 10-15,S-MAX 06-,VOLVO S60 II 10-15, S80 II 08-16,V60 I 10-14,V70 III 07-14, XC60 09-14/DIAGNOSTYCZNA, Dœ.CAœK.660MM

• Fitting Position: Front
• Exhaust System: after catalytic converter
• Lambda Sensor: Diagnostic Probe
• Number of connectors: 4
• Length [mm]: 725
• Manufacturer: VERNET

• for OE number: 1 516 668
• Fabrication Number: EPP-FR-005
• Manufacturer: NTY

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV909

• Sensor Type: Piezoelectric Sensor
• Cable Length [mm]: 440
• Number of pins: 2
• Name: Detonatsiooniandur
• Manufacturer: MEY

• Lambda Sensor: Diagnostic Probe, Finger probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Number of connectors: 2
• Weight [kg]: 0.065
• for OE number: C201-18-921
• Name: Detonatsiooniandur
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 4
• Housing Type: without housing
• Name: Ohumassimootja
• Manufacturer: MAX

• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: after catalytic converter
• Quantity: 1
• Cable Length [mm]: 630
• Manufacturer: DELPHI
• Name: DE ES20443-12B1

• Housing Type: without housing
• Number of pins: 4
• Fitting Position: Air Filter Housing
• Recommended additional repairs: Air Filter
• New Part:
• Used part return not required:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 660
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Number of pins: 2
• Cable Length [mm]: 450
• Tightening Torque [Nm]: 20
• Sensor Type: Piezoelectric Sensor
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PG009108731
• Manufacturer: HELLA

SVHC: 1317-36-8; Lead monoxide (lead oxide), 12060-00-3; Lead titanium trioxide, 7439-92-1; Lead Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Lambda Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Number of pins: 4
• Cable Length [mm]: 600
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Version: 2
• Fabrication Number: ESL-HY-513
• Manufacturer: NTY

Lambda Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased Fitting Position: Front, before catalytic converter, after catalytic converter

• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• for article number: 86298E
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Voltage [V]: 12
• Manufacturer: FAST

• Required quantity: 1
• Mounting Type: Bolted
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: Ohumassimootja
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Exhaust Manifold
• Line insulation design: with silicone-coated woven-fibre insulation
• Connector Shape: D Shape
• Number of pins: 6
• Number of circuits: 5
• Socket colour: black
• Thread Size: M18 x 1,5
• Weight [kg]: 0.152
• Length [mm]: 400
• for OE number: 1 688 499
• Conductor Number: 5
• Exhaust System: before catalytic converter
• Cable Length [mm]: 480
• Lambda Sensor: Regulating Probe, Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of circuits: 5
• Length [mm]: 630
• Conductor Number: 5
• Cable Length [mm]: 630
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• for OE number: 30757556, 1302222
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 725
• Number of pins: 4
• Weight [g]: 126
• Gross Weight [g]: 159
• Manufacturer: DENSO
• Name: DN DOX-2068

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Colour: red
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Housing Type: without housing
• Number of pins: 4
• Connector Shape: oval
• Manufacturer: ERA

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 4
• Housing Type: without housing
• Name: Ohumassimootja
• Manufacturer: BRM

• Quantity: 1
• Housing Type: without housing
• Number of pins: 4
• Plug Type: Male
• Housing Colour: black/silver
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Name: OHUMASSIMOOTJA
• Manufacturer: DLP

• Engine Code: B 4164 T
• Fitting Position: before catalytic converter
• alternative OE number: 31293740
• Required quantity: 1
• Cable Length [mm]: 400
• Conductor Number: 5
• Supplementary Article/Info 2: with fastening material
• Number of circuits: 5
• Name: EP 1.998.393
• Manufacturer: EPS

Lambda Sensor: Regulating Probe, Heated, Planar probe, Broadband lambda sensor, Thread pre-greased

• Warranty: 5 years warranty
• General Information: Sold in Hueco brand: printing and packaging
• Name: OHUMASSIMOOTJA
• Manufacturer: HUC

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Length [mm]: 660
• Number of pins: 4
• Weight [kg]: 0.119
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Required quantity: 1
• Version: 2
• Number of connectors: 5
• Manufacturer: VERNET

• for article number: 86298
• Manufacturer: MEAT&DORIA

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.15
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Technical Information: Universal
• Manufacturer: SKV GERMANY

• Recommended additional repairs: Air Filter
• Manufacturer: BOSCH
• Name: BS 0986280700

• Resistor Type: Hot-film Sensor
• Number of connectors: 4
• Weight [kg]: 0.038
• Housing Type: without housing
• for OE number: 1 516 668
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Overall Length [mm]: 510
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Number of mounting bores: 3
• Number of pins: 6
• Transmission Type: Manual Transmission
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR, SOIDUPEDAALIASEND
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of mounting bores: 3
• Number of pins: 6
• Transmission Type: Automatic Transmission
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR, SOIDUPEDAALIASEND
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: B 4164 T
• Colour: chrome/black
• Manufacturer: VDO

• Operating Mode: Electric
• Voltage [V]: 12
• Manufacturer: PIERBURG

• Number of pins: 4
• Supplementary Article/Supplementary Info: without suction pipe
• Alternative Repair Kit: 2324217
• Manufacturer: METZGER

• Housing Type: without housing
• Supplementary Article/Supplementary Info: without suction pipe
• Number of pins: 4
• Manufacturer: ERA