• Suspension: for vehicles without electronic suspension control
• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Manufacturer: JP GROUP
• Lisainfo: Shock Absorber
• Additional information: Shock Absorber

• Suspension: for vehicles without electronic suspension control
• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Manufacturer: JP GROUP
• Lisainfo: Shock Absorber
• Additional information: Shock Absorber

• Fitting Position: Front Axle
• Name: Kaitsemts/kaitsekumm,amort
• Manufacturer: MAX

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: AB-MZ-011
• Manufacturer: NTY

• Trim Level: RA01, RA03, RA06
• Fitting Position: Front Axle
• Required quantity: 2
• Material: Thermoplast
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Shock Absorber Mounting Type: Bottom eye
• Weight [kg]: 0.148
• Packaging length [cm]: 5
• Packaging width [cm]: 4
• Packaging height [cm]: 4
• Manufacturer: FEBEST

• for OE number: 1223834
• Fitting Position: Front Axle
• Height [mm]: 250
• Material: Thermoplast
• Weight [g]: 85
• Diameter 1 [mm]: 71
• Diameter 2 [mm]: 62
• Name: IM 37013
• Manufacturer: ORIGINAL IMPERIUM

• Length [mm]: 241
• Inner Diameter [mm]: 72, 65
• Fitting Position: Front Axle
• Weight [kg]: 0.17
• Name: Kaitsemts/kaitsekumm,amort
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Weight [kg]: 0.125
• Packaging length [cm]: 24
• Packaging width [cm]: 8
• Packaging height [cm]: 8
• Manufacturer: FEBEST

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Monotube
• Shock Absorber Design: Suspension Strut
• Manufacturer: KAMOKA AMORTYZATORY
• Lisainfo: 2000997 KAMOKA
• Additional information: 2000997 KAMOKA

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Design: Suspension Strut
• Manufacturer: KAMOKA AMORTYZATORY

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• for OE number: 30736946, 31200215, 31200754, 31200755, 31262177
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Suspension Strut
• Manufacturer: DENCKERMANN AMORTYZATORY

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Max. Length [mm]: 515
• Manufacturer: KAMOKA

• for OE number: 30714221, 30748258, 31262390
• Vehicle type: Marked 31,32,43
• Suspension: for vehicles without electronic suspension control
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Max. Length [mm]: 472
• Shock Absorber Design: Telescopic Shock Absorber
• Name: CFD 564101
• Manufacturer: DACO

• for OE number: 31212805, 31262151
• Vehicle type: Marked 36,37
• Suspension: for vehicles without electronic suspension control
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Max. Length [mm]: 515
• Shock Absorber Design: Telescopic Shock Absorber
• Name: CFD 564102
• Manufacturer: DACO

• for OE number: 31212805, 31262151
• Vehicle type: Marked 36,37
• Suspension: for vehicles without electronic suspension control
• Fitting Position: Rear Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Max. Length [mm]: 515
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: ASHIKA
• Lisainfo: MA-01041
• Additional information: MA-01041

• for OE number: 31212805, 31262151
• Vehicle type: Marked 36,37
• Suspension: for vehicles without electronic suspension control
• Fitting Position: Rear Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Max. Length [mm]: 515
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: JAPKO

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Check OE number:
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: 72-2440
• Name: AMORT
• Manufacturer: MAX
• Lisainfo: MGA-5773
• Additional information: MGA-5773

• Shock Absorber Type: Gas Pressure
• Fitting Position: Rear Axle
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Length 2 [mm]: 453
• Mounting points diameter [mm]: 14.1
• Shock Absorber System: Twin-Tube
• Name: Gas shock absorber
• Quality class: PJ

Suspension: for vehicles without electronic suspension control, for vehicles with sports suspension, for vehicles with standard suspension Lisainfo: "Tootja: SRL
FORD MONDEO/VOLVO S80 06-
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
FORD MONDEO/VOLVO S80 06-
(kvaliteediklass: PJ)"

• Quantity per axle: 1
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Diameter [mm]: 49
• Length 1 [mm]: 459
• Length 2 [mm]: 291
• Stanchion Tube Diameter [mm]: 14
• Observe technical data:
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• for OE number: 30714221, 30748258, 31262390
• Vehicle type: Marked 31,32,43
• Suspension: for vehicles without electronic suspension control
• Fitting Position: Rear Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Name: AMORT
• Manufacturer: JPA

• Suspension: for vehicles without electronic suspension control
• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Manufacturer: KAMOKA

• Suspension: for vehicles without electronic suspension control
• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Manufacturer: KAMOKA

• Fitting Position: Front Axle, Front Axle Right
• Suspension: for vehicles with standard suspension
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• paired article number: 232-01-065
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Fitting Position: Front Axle, Front Axle Left
• Suspension: for vehicles with standard suspension
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• paired article number: 232-01-066
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• for OE number: 31212805, 31262151
• Vehicle type: Marked 36,37
• Suspension: for vehicles without electronic suspension control
• Fitting Position: Rear Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Max. Length [mm]: 515
• Shock Absorber Design: Telescopic Shock Absorber
• Name: Amort
• Manufacturer: JPA

• Vehicle Equipment: for vehicles without leveling control
• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Manufacturer: DELLO AUTOMEGA

Suspension: for vehicles with standard suspension, for vehicles with sports suspension

• Fitting Position: Front Axle, Front Axle Right
• Suspension: for vehicles with standard suspension
• Check OE number:
• Shock Absorber Design: Suspension Strut
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• paired article number: 11-0497
• Name: AMORT
• Manufacturer: MAX
• Lisainfo: MGA-5855
• Additional information: MGA-5855

• Fitting Position: Front Axle, Front Axle Left
• Suspension: for vehicles with standard suspension
• Check OE number:
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• paired article number: 11-0498
• Shock Absorber Mounting Type: Top pin
• Name: AMORT
• Manufacturer: MAX
• Lisainfo: MGA-5854
• Additional information: MGA-5854

• Fitting Position: Front Axle, Right
• Suspension: for vehicles with standard suspension
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Bottom Pin
• Manufacturer: DENCKERMANN AMORTYZATORY

• Fitting Position: Front Axle, Left
• Suspension: for vehicles with standard suspension
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Bottom Pin
• Manufacturer: DENCKERMANN AMORTYZATORY

• Fitting Position: Front Axle Right
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• paired article number: MJ00604
• Article number of recommended accessories: SMJ0138
• Shock Absorber Mounting Type: Top pin
• Manufacturer: JAPKO

• Fitting Position: Front Axle Left
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• paired article number: MJ00603
• Article number of recommended accessories: SMJ0138
• Shock Absorber Mounting Type: Top pin
• Manufacturer: JAPKO

• Shock Absorber Type: Gas Pressure
• Fitting Position: Front Axle Left
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Plate, Top pin
• Shock Absorber System: Twin-Tube
• Name: Gas shock absorber left
• Quality class: PJ

Suspension: for vehicles without electronic suspension control, for vehicles with sports suspension, for vehicles with standard suspension Lisainfo: "Tootja: SRL
FORD MONDEO 07-
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
FORD MONDEO 07-
(kvaliteediklass: PJ)"

• Suspension: for vehicles without electronic suspension control
• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• paired article number: SSA-10127
• Manufacturer: KAVO

• Suspension: for vehicles without electronic suspension control
• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• paired article number: SSA-10144
• Manufacturer: KAVO

• Suspension: for vehicles without electronic suspension control
• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Name: CFD 452507R
• Manufacturer: DACO

• Suspension: for vehicles without electronic suspension control
• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Name: CFD 452507L
• Manufacturer: DACO

• Fitting Position: Rear Axle
• Length [mm]: 516
• Length 2 [mm]: 343
• Shock Absorber Design: Damper Module
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Diameter 1 [mm]: 48
• Diameter 2 [mm]: 30
• Spring Type: for vehicles with coil spring suspension
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Rear Axle
• Length [mm]: 462
• Length 2 [mm]: 289
• Shock Absorber Design: Damper Module
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Diameter 1 [mm]: 48
• Diameter 2 [mm]: 30
• Spring Type: for vehicles with coil spring suspension
• Manufacturer: MAGNETI MARELLI
• Name: MM 3025G

• Fitting Position: Rear Axle
• Vehicle Equipment: for vehicles without leveling control
• Suspension: for vehicles without electronic suspension control
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Weight [kg]: 2
• Bore Ø [mm]: 35
• Length 1 [mm]: 289
• Length 2 [mm]: 463
• Piston Rod Diameter [mm]: 15.8
• Article number of recommended accessories: MK393, PK398
• Packaging length [cm]: 60
• Packaging width [cm]: 7.2
• Packaging height [cm]: 7.2
• Manufacturer: MONROE
• Lisainfo: G2224 MON
• Additional information: G2224 MON

Warranty: 5 years warranty with accessories when replaced in pairs

• Fitting Position: Front Axle, Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• paired article number: GH-352567H
• Article number of recommended accessories: GH-694702
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin
• Manufacturer: AUTO-GH

• Fitting Position: Front Axle, Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• paired article number: GH-352567V
• Article number of recommended accessories: GH-694702
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin
• Manufacturer: AUTO-GH

• Fitting Position: Front Axle Right
• Length [mm]: 465
• Length 2 [mm]: 287
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Diameter 1 [mm]: 52
• Diameter 2 [mm]: 32
• paired article number: 353024070200
• Spring Type: for vehicles with coil spring suspension
• Manufacturer: MAGNETI MARELLI
• Name: MM 3024GR

• Fitting Position: Front Axle Left
• Length [mm]: 465
• Length 2 [mm]: 287
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Diameter 1 [mm]: 52
• Diameter 2 [mm]: 32
• paired article number: 353024070100
• Spring Type: for vehicles with coil spring suspension
• Manufacturer: MAGNETI MARELLI
• Name: MM 3024GL

• Fitting Position: Front Axle Left
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• paired article number: MM-00603
• Article number of recommended accessories: SM0138
• Shock Absorber Mounting Type: Top pin
• Name: AMORT
• Manufacturer: JPA

• Fitting Position: Front Axle Right
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• paired article number: MM-00604
• Article number of recommended accessories: SM0138
• Shock Absorber Mounting Type: Top pin
• Name: AMORT
• Manufacturer: JPA

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Length 2 [mm]: 453
• Mounting points diameter [mm]: 14.1
• Shock Absorber System: Twin-Tube
• Name: AMORT
• Manufacturer: BIL
• Quality class: Q

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles without electronic suspension control Additional information: "Tootja: BILSTEIN
FORD GALAXY 06-
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
FORD GALAXY 06-
(kvaliteediklass: Q)"

• Suspension: for vehicles with standard suspension
• Check OE number:
• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Article number of recommended accessories: 714 641 0009/S, 714 640 0011, 714 641 0009
• replacement in pairs recommended:
• paired article number: 726 623 0045
• Name: Amort
• Manufacturer: MEY

• Suspension: for vehicles without electronic suspension control
• Vehicle type: Marked 31,32,43
• for OE number: 30714221, 30748258, 31262390
• Fitting Position: Rear Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Max. Length [mm]: 472
• Shock Absorber Design: Telescopic Shock Absorber
• Suspension Strut Outer Diameter [mm]: 48
• Name: AMORT
• Manufacturer: KYB

General Information: Please refer to the technical drawing in "Documents"

• Suspension: for vehicles without electronic suspension control
• Vehicle type: Marked 36,37
• for OE number: 31212805, 31262151
• Fitting Position: Rear Axle
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Max. Length [mm]: 515
• Shock Absorber Design: Telescopic Shock Absorber
• Name: AMORT
• Manufacturer: KYB
• Additional information: KYB349129
• Lisainfo: KYB349129

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Check OE number:
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: SEOV32/15X168A
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Name: AMORT
• Manufacturer: SAA
• Lisainfo: 313 754
• Additional information: 313 754

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle, Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• paired article number: GH-354817V
• Article number of recommended accessories: GH-694702
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin
• Manufacturer: AUTO-GH

• Fitting Position: Front Axle, Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• paired article number: GH-354817H
• Article number of recommended accessories: GH-694702
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin
• Manufacturer: AUTO-GH

• Suspension: for vehicles without electronic suspension control
• Fitting Position: Front Axle Left
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• paired article number: 339718
• Shock Absorber Mounting Type: Top pin
• Piston Rod Diameter [mm]: 22
• Name: AMORT
• Manufacturer: KYB

General Information: Please refer to the technical drawing in "Documents"

• Suspension: for vehicles without electronic suspension control
• Fitting Position: Front Axle Right
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• paired article number: 339719
• Shock Absorber Mounting Type: Top pin
• Piston Rod Diameter [mm]: 22
• Name: AMORT
• Manufacturer: KYB

General Information: Please refer to the technical drawing in "Documents"

• Fitting Position: Front Axle Left
• Suspension: for vehicles with standard suspension
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber System: Twin-Tube
• Thread Size: M12x1.25
• Piston Rod Length [mm]: 224
• Vehicle Equipment: for vehicles without leveling control
• Piston Rod Diameter [mm]: 22
• paired article number: A-3980GR
• Suspension Strut Outer Diameter [mm]: 52
• Manufacturer: OPTIMAL ZAWIESZENIE

• Fitting Position: Front Axle, Left
• Suspension: for vehicles without electronic suspension control
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Weight [kg]: 4.4
• Bore Ø [mm]: 32
• Length 1 [mm]: 306
• Length 2 [mm]: 457
• Piston Rod Diameter [mm]: 22
• Article number of recommended accessories: MK323, MK400, PK292
• paired article number: G8198
• Packaging length [cm]: 57.5
• Packaging width [cm]: 20.3
• Packaging height [cm]: 20.3
• Manufacturer: MONROE

Warranty: 5 years warranty with accessories when replaced in pairs

• Fitting Position: Front Axle, Right
• Suspension: for vehicles without electronic suspension control
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Weight [kg]: 4.4
• Bore Ø [mm]: 32
• Length 1 [mm]: 306
• Length 2 [mm]: 457
• Piston Rod Diameter [mm]: 22
• Article number of recommended accessories: MK323, MK400, PK292
• paired article number: G8199
• Packaging length [cm]: 57.5
• Packaging width [cm]: 20.3
• Packaging height [cm]: 20.3
• Manufacturer: MONROE

Warranty: 5 years warranty with accessories when replaced in pairs

• Country Specific Design: Hungary, Poland, Romania, Russia, Slovakia
• Vehicle Identification Number (VIN) from: 104017
• Quantity per axle: 1
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Diameter [mm]: 52
• Length 1 [mm]: 463
• Length 2 [mm]: 306
• Stanchion Tube Diameter [mm]: 22
• Observe technical data:
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle, Right
• Suspension: for vehicles with standard suspension
• Check OE number:
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: SFE36/22X160A
• paired article number: 313 748
• Shock Absorber Mounting Type: Top pin
• Manufacturer: SACHS

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle, Left
• Suspension: for vehicles with standard suspension
• Check OE number:
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: SFE36/22X160A
• paired article number: 313 749
• Shock Absorber Mounting Type: Top pin
• Name: AMORT
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Plate, Top pin
• paired article number: 22-182876
• Shock Absorber System: Twin-Tube
• Name: AMORT
• Manufacturer: BIL

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles without electronic suspension control Additional information: "Tootja: BILSTEIN
FORD MONDEO 07-
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
FORD MONDEO 07-
(kvaliteediklass: Q)"

• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Plate, Top pin
• paired article number: 22-182869
• Shock Absorber System: Twin-Tube
• Name: AMORT
• Manufacturer: BIL

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles without electronic suspension control Additional information: "Tootja: BILSTEIN
FORD MONDEO 07-
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
FORD MONDEO 07-
(kvaliteediklass: Q)"

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Weight [kg]: 9.045
• Quantity: 2
• Packaging length [cm]: 54.5
• Packaging width [cm]: 32.5
• Packaging height [cm]: 20.5
• Manufacturer: FEBEST

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Length [mm]: 453
• Shock Absorber System: Monotube
• Manufacturer: BILSTEIN
• Name: BI 24-143639
• Quality class: Q

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control Additional information: "Tootja: BILSTEIN
FORD MONDEO/S-MAX
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
FORD MONDEO/S-MAX
(kvaliteediklass: Q)"

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Monotube
• Name: BI 24-143646
• Manufacturer: BILSTEIN

Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Fitting Position: Front Axle Right
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• paired article number: 35-144960
• Shock Absorber System: Single Tube Upside Down
• Name: BI 35-144977
• Manufacturer: BILSTEIN
• Quality class: Q

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Fitting Position: Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• paired article number: 35-144977
• Shock Absorber System: Single Tube Upside Down
• Name: BI 35-144960
• Manufacturer: BILSTEIN
• Quality class: Q

Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"

• Fitting Position: Rear Axle
• Trim Level: Four-C
• Suspension: for vehicles with electronic suspension control
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Electronically adjustable shock strength
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Weight [kg]: 1.6
• Operating Mode: Electronic
• Length 1 [mm]: 291
• Length 2 [mm]: 466
• Warranty: 5 years warranty
• Packaging length [cm]: 69.6
• Packaging width [cm]: 13.3
• Packaging height [cm]: 13.6
• Name: Amort
• Manufacturer: MON

• Fitting Position: Front Axle, Left
• Suspension: for vehicles with electronic suspension control
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Electronically adjustable shock strength
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Weight [kg]: 2.7
• Operating Mode: Electronic
• Warranty: 5 years warranty
• paired article number: C2510R
• Packaging length [cm]: 59.1
• Packaging width [cm]: 20.7
• Packaging height [cm]: 21.2
• Name: Amort
• Manufacturer: MON

• Fitting Position: Front Axle, Right
• Suspension: for vehicles with electronic suspension control
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Electronically adjustable shock strength
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Weight [kg]: 2.7
• Operating Mode: Electronic
• Warranty: 5 years warranty
• paired article number: C2511L
• Packaging length [cm]: 59.1
• Packaging width [cm]: 20.7
• Packaging height [cm]: 21.2
• Name: Amort
• Manufacturer: MON