Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Rear Axle both sides,
Front - Control/Trailing Arm Type: for trailing arm
- Required quantity: 4
- Quality/ Grade: 10.9
- Thread Length [mm]: 44
- Screw length below head [mm]: 60
- Spanner Size: 18
- Thread Size: M14x2
-
Surface: Zinc-
coated - Manufacturer: TED
Name: RUBA WAHACZA FORD T. MONDEO, GALAXY 06- (1 SZTUKA)
- Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
FORD MONDEO 07-
(kvaliteediklass: PJ)"
-
Fitting Position: Rear Axle,
Lower - Control/Trailing Arm Type: Trailing Arm
- Length [mm]: 195
- Manufacturer: KAMOKA
-
Fitting Position: Rear Axle both sides,
Front - Control/Trailing Arm Type: for trailing arm
- Required quantity: 2
- Number of Parts [parts]: 2
- Manufacturer: TED
Name: ZESTAW RUB WAHACZA FORD T. MONDEO, GALAXY 06- (2 SZTUKI) ZESTAW NA JEDN¤ STRON¨
- Control/Trailing Arm Type: Trailing Arm
-
Fitting Position: Rear Axle,
Lower - Axle alignment required after fitting:
-
Article number of the recommended special tool: V99-
1020 - Weight [kg]: 0.688
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Control/Trailing Arm Type: Trailing Arm
- Quantity Unit: Set
-
Fitting Position: Upper,
Front, Rear Axle Left, Rear Axle Right - Length from [mm]: 195
- Rod/Strut: Push Rod
- Name: Control arm left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
FORD MONDEO, 07-
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
FORD MONDEO, 07-
(kvaliteediklass: PJ)"
- Control/Trailing Arm Type: Control Arm
- Fitting Position: Rear Axle
- Length [mm]: 195
- Inner Diameter [mm]: 12
- Name: ALT 86289AL
- Manufacturer: ALTE AUTOMOTIVE
-
Control/Trailing Arm Type: Triangular Control Arm
(CV) -
Fitting Position: Rear Axle,
Front, Lower - for OE number: 1426770
- Manufacturer: SASIC
- Fitting Position: Rear Axle both sides
- Control/Trailing Arm Type: Control Arm
- Manufacturer: METALCAUCHO
-
Supplementary Article/Info 2: with rubber mount,
without ball joint - Material: Steel
- Length [mm]: 195
- Control/Trailing Arm Type: Control Arm
- as standard:
- paired article number: 211059
- Weight [kg]: 0.573
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
Fitting Position: in front of axle, Rear Axle Left, Rear Axle Right, outer, Upper
-
Fitting Position: Lower,
Rear Axle Right, Rear Axle Left - Control/Trailing Arm Type: Control Arm
- Name: COC 49398517
- Manufacturer: CORTECO
-
Fitting Position: Rear Axle Left,
Rear Axle Right, Front, Lower -
Control/Trailing Arm Type: Semi-
Trailing Arm - Supplementary Article/Info 2: with rubber mount
- Material: Sheet Steel
- Length [mm]: 195
- replacement in pairs recommended:
- Required quantity: 2
-
Name: Roolimine -
Kndmik FORD T. MONDEO/ GALAXY 06- - Manufacturer: MEY
- Lisainfo: 7160500019
- Additional information: 7160500019
- Fitting Position: Rear Axle both sides
- Control/Trailing Arm Type: Trailing Arm
- Diameter 2 [mm]: 12.2
- Length [mm]: 195
- Weight [kg]: 0.567
- Manufacturer: RTS
- Fitting Position: Rear Axle both sides
- Required quantity: 2
- paired article number: VKDS 424008
- Length [mm]: 195
- Bore Ø [mm]: 12.2
- Control/Trailing Arm Type: Control Arm
- Supplementary Article/Info 2: without ball joint
- Manufacturer: SKF
- Name: SK VKDS424008
- Production date from: 2007
- Production date to: 2009
- Fitting Position: Rear Axle
- Weight [kg]: 0.61
- Control/Trailing Arm Type: Control Arm
- Rod/Strut: Suspension Rod
- Packaging length [cm]: 25.8
- Packaging width [cm]: 6
- Packaging height [cm]: 4.2
- Manufacturer: FEBEST
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Rear Axle,
Upper - Length [mm]: 333
- Inner Diameter [mm]: 12
- Name: ALT 88864AL
- Manufacturer: ALTE AUTOMOTIVE
- Production date to: 2006
- Fitting Position: Rear Axle
- Weight [kg]: 0.838
- Control/Trailing Arm Type: Control Arm
- Packaging length [cm]: 56.4
- Packaging width [cm]: 5.1
- Packaging height [cm]: 3.9
- Manufacturer: FEBEST
-
Additional information: FST2725-
V70R -
Lisainfo: FST2725-
V70R
- Control/Trailing Arm Type: Control Arm
-
Fabrication Number: ZWD-
VW- 004 - Manufacturer: NTY
Fitting Position: Front Axle Left, Lower, Rear, Front Axle, outer, Left
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Suspension: for vehicles with electronic suspension control
- paired article number: 184454
- Material: Cast Steel
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Rear Axle Left,
Upper - Weight [kg]: 3.328
- Supplementary Article/Supplementary Info: with rubber mounts
-
Name: Ootshoob,
kndmik - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Suspension: for vehicles with electronic suspension control
- paired article number: 184453
- Material: Cast Steel
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Rear Axle Right,
Upper - Weight [kg]: 3.328
- Supplementary Article/Supplementary Info: with rubber mounts
-
Name: Ootshoob,
kndmik - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Rear Axle Right,
Lower - Length [mm]: 330
- Inner Diameter [mm]: 12
- paired article number: 92983AL
- Name: ALT 92984AL
- Manufacturer: ALTE AUTOMOTIVE
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Rear Axle Left,
Upper - Length [mm]: 330
- Inner Diameter [mm]: 12
- paired article number: 92984AL
- Name: ALT 92983AL
- Manufacturer: ALTE AUTOMOTIVE
-
Transmission ID: M66,
TF- 80SC - Block Separation:
- Suspension: for vehicles without active suspension
-
Fitting Position: Rear Axle Left,
Rear Axle Right, Upper - Control/Trailing Arm Type: Control Arm
- Supplementary Article/Info 2: with rubber mount
- Required quantity: 2
-
Warranty: 3 years warranty or until 75,
000km - Manufacturer: METZGER
Vehicle Equipment: for vehicles without leveling control, for vehicles with leveling control
-
Fitting Position: Front Axle Right,
Lower - Vehicle Identification Number (VIN) from: 87001
- Control/Trailing Arm Type: Control Arm
- Net weight [kg]: 6.46
- Manufacturer: NK
Name: Roolimine - Kndmik FORD P. MONDEO/S-MAX/GALAXY 07- PR
-
Fitting Position: Front Axle Left,
Lower - Control/Trailing Arm Type: Control Arm
- Cone Size [mm]: 18
- paired article number: 9050098
- Manufacturer: KAMOKA
-
Fitting Position: Front Axle Right,
Lower - Control/Trailing Arm Type: Control Arm
- Cone Size [mm]: 18
- paired article number: 9050097
- Manufacturer: KAMOKA
- Vehicle Identification Number (VIN) to: 151013
-
Fitting Position: Front Axle Right,
Lower - Control/Trailing Arm Type: Control Arm
- Supplementary Article/Info 2: with ball joint
- Manufacturer: JP GROUP
- Lisainfo: Track Control Arm
- Additional information: Track Control Arm
- Vehicle Identification Number (VIN) to: 151013
-
Fitting Position: Front Axle Left,
Lower - Control/Trailing Arm Type: Control Arm
- Supplementary Article/Info 2: with ball joint
- Manufacturer: JP GROUP
- Lisainfo: Track Control Arm
- Additional information: Track Control Arm
- Model Year to: 2011
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Front Axle,
Left - Material: Sheet Steel
-
paired article number: 72-
3571 -
Name: Ootshoob,
kndmik - Manufacturer: MAX
- Model Year to: 2011
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Front Axle,
Right - Material: Sheet Steel
-
paired article number: 72-
3570 -
Name: Ootshoob,
kndmik - Manufacturer: MAX
- Vehicle Identification Number (VIN) to: 151013
- Control/Trailing Arm Type: Control Arm
- Quantity Unit: Set
-
Fitting Position: Lower,
Front Axle Left - Cone Size [mm]: 18
- Material: Sheet Steel
- Rod/Strut: Push Rod
- Name: Control arm left
- Quality class: PJ
Lisainfo: "Tootja: SRL
FORD MONDEO, 07-
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
FORD MONDEO, 07-
(kvaliteediklass: PJ)"
- Model Year to: 2011
- Control/Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Left
- Control/Trailing Arm Design: Triangular Control Arm
-
Supplementary Article/Info 2: with rubber mount,
with ball joint, with nut - Supplementary Article/Supplementary Info: with holder
-
Surface: Black-
painted, Cathodic Painting - paired article number: 304 083
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Front Axle Right,
Lower, Front Axle, outer, Right -
Fabrication Number: ZWD-
FR- 022 -
paired article number: ZWD-
FR- 021
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Front Axle Left,
Lower, Front Axle, outer, Left -
Fabrication Number: ZWD-
FR- 021 -
paired article number: ZWD-
FR- 022
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Model Year to: 2011
- Control/Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Right
- Control/Trailing Arm Design: Triangular Control Arm
-
Supplementary Article/Info 2: with nut,
with ball joint, with rubber mount - Supplementary Article/Supplementary Info: with holder
-
Surface: Black-
painted, Cathodic Painting - paired article number: 304 084
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Vehicle Identification Number (VIN) to: 151013
-
Fitting Position: Left Front,
Lower - Control/Trailing Arm Type: Control Arm
- paired article number: ZV181R
- Supplementary Article/Info 2: with ball joint
-
Fitting Position: Front Axle Right,
outer, Lower - Vehicle Identification Number (VIN) to: 64876
- Thread Size 1: M14x1.5
- Material: Sheet Steel
- paired article number: TC2158
- Control/Trailing Arm Type: Trailing Arm
- Supplementary Article/Info 2: with ball joint
- Length [mm]: 535
- Width [mm]: 390
- Height [mm]: 125
- Manufacturer: DELPHI
- Name: DE TC2159
-
Fitting Position: Front Axle Left,
outer, Lower - Vehicle Identification Number (VIN) to: 64876
- Thread Size 1: M14x1.5
- Material: Sheet Steel
- paired article number: TC2159
- Control/Trailing Arm Type: Trailing Arm
- Supplementary Article/Info 2: with ball joint
- Length [mm]: 535
- Width [mm]: 390
- Height [mm]: 125
- Manufacturer: DELPHI
- Name: DE TC2158
- Vehicle Identification Number (VIN) to: 151013
-
External Thread [mm]: M14x1,
5 - Control/Trailing Arm Type: Control Arm
-
Fitting Position: Lower,
Front Axle Right -
Article number of the recommended special tool: V99-
1020 -
paired article number: V25-
0219 - Axle alignment required after fitting:
- Weight [kg]: 6.515
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Front Axle Right,
Front Axle Left - replacement in pairs recommended:
- Required quantity: 2
-
Name: Remondikomplekt,
ootshoob - Manufacturer: MEY
- Control/Trailing Arm Type: Control Arm
- Base body material: Steel
- Fitting Position: Front Axle Right
- Net weight [kg]: 6.54
-
Thread Size: RHT M14x1,
5 -
Thread Size 1: RHT M14x1,
5 -
paired article number: G40.4497/
C - Supplementary Article/Info 2: with ball joint
-
Name: OMG G40.4496/
C - Manufacturer: OMG
- Vehicle Identification Number (VIN) to: B*999999
- paired article number: 34583
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Front Axle Right,
Lower - Weight [kg]: 6.515
-
Supplementary Article/Info 2: with ball joint,
with bearing - Supplementary Article/Supplementary Info: with lock nuts
-
Name: Roolimine -
Kndmik FORD P. MONDEO 07- PR - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Name: Control arm left
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
FORD MONDEO, 07-
(kvaliteediklass: PJ)"
- Fitting Position: Front Axle
- Control/Trailing Arm Type: Control Arm
- Warranty: 3 years warranty
- Weight [kg]: 6.6
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Fitting Position: Front Axle
- Control/Trailing Arm Type: Control Arm
- Warranty: 3 years warranty
- Weight [kg]: 6.8
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 04SKV061
- Name: Control arm right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
FORD MONDEO, 07-
(kvaliteediklass: PJ)"
- Model Year to: 2011
-
Fitting Position: Front Axle Left,
Lower - Control/Trailing Arm Type: Control Arm
-
Supplementary Article/Info 2: with rubber mount,
with ball joint - Material: Sheet Steel
- replacement in pairs recommended:
- Required quantity: 1
- paired article number: 716 050 0034
- Manufacturer: MEY
Name: Roolimine - Kndmik P. FORD MONDEO/S-MAX/GALAXY 07- LE
- Model Year to: 2011
-
Fitting Position: Front Axle Right,
Lower - Control/Trailing Arm Type: Control Arm
-
Supplementary Article/Info 2: with rubber mount,
with ball joint - Material: Sheet Steel
- replacement in pairs recommended:
- Required quantity: 1
- paired article number: 716 050 0033
-
Name: Roolimine -
Kndmik FORD P. MONDEO 07- PR - Manufacturer: MEY
- Vehicle Identification Number (VIN) to: 151013
- Wheelbase: not for extended wheelbase
-
Fitting Position: Right,
Lower, Front Axle - Control/Trailing Arm Type: Control Arm
- Required quantity: 1
- Cone Size [mm]: 18
- Material: Sheet Steel
- Mounting Type: Hydro Mount
- Supplementary Article/Supplementary Info: with holder
-
Supplementary Article/Info 2: with ball joint,
with rubber mount - Mounting points diameter [mm]: 14.3
-
paired article number: G6-
1384 -
External Thread [mm]: M14 x 1,
50 RHT M - Manufacturer: OPTIMAL ZAWIESZENIE
-
External Thread 2 [mm]: M 14X1,
5 - Fitting Position: Front Axle Left
- Cone Size [mm]: 18
- Control/Trailing Arm Type: Control Arm
- Manufacturer: ASHIKA
- Vehicle Identification Number (VIN) to: B*999999
- paired article number: 34584
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Front Axle Left,
Lower - Weight [kg]: 6.515
-
Supplementary Article/Info 2: with bearing,
with ball joint - Supplementary Article/Supplementary Info: with lock nuts
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Roolimine - Kndmik P. FORD MONDEO/S-MAX/GALAXY 07- LE
- Construction Year from: 08.2006
- Construction Year to: 12.2009
-
Fitting Position: Front Axle,
Left, outer, Lower - Weight [kg]: 6.5
- Required quantity: 1
- Control/Trailing Arm Type: Control Arm
-
Supplementary Article/Info 2: with ball joint,
with rubber mount - paired article number: L10565
- Packaging length [cm]: 50
- Packaging width [cm]: 42
- Packaging height [cm]: 15
- Manufacturer: MONROE
- Vehicle Identification Number (VIN) to: 151013
- Fitting Position: Front Axle Right
- Control/Trailing Arm Type: Control Arm
- Material: Sheet Steel
-
paired article number: 20-
20790 - Weight [kg]: 6.44
-
Name: DY 20-
20789 - Manufacturer: DYS
- Vehicle Identification Number (VIN) to: 151013
- Fitting Position: Front Axle Left
- Control/Trailing Arm Type: Control Arm
- Material: Sheet Steel
-
paired article number: 20-
20789 - Weight [kg]: 6.44
-
Name: DY 20-
20790 - Manufacturer: DYS
- Control/Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Right
-
Thread Size: M14 x 1,
5 - Cone Size [mm]: 22
- Inner Diameter [mm]: 14
- paired article number: 84758AL
- Name: ALT 84757AL
- Manufacturer: ALTE AUTOMOTIVE
- Control/Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left
-
Thread Size: M14 x 1,
5 - Cone Size [mm]: 22
- Inner Diameter [mm]: 14
- paired article number: 84757AL
- Name: ALT 84758AL
- Manufacturer: ALTE AUTOMOTIVE
- Vehicle Identification Number (VIN) to: B*999999
- paired article number: 50 93 4583
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Front Axle Right,
Lower - Weight [kg]: 6.515
- Supplementary Article/Supplementary Info: with lock nuts
-
Supplementary Article/Info 2: with bearing,
with ball joint - Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Vehicle Identification Number (VIN) to: B*999999
- paired article number: 50 93 4584
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Front Axle Left,
Lower - Weight [kg]: 6.515
-
Supplementary Article/Info 2: with ball joint,
with bearing - Supplementary Article/Supplementary Info: with lock nuts
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Model Year to: 2011
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Front Axle,
Right - Material: Sheet Steel
- Cone Size [mm]: 21.5
-
Cone Pitch: 1:
6 - paired article number: JTC2215
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
- Vehicle Identification Number (VIN) to: 151013
- Fitting Position: Front Axle Left
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- paired article number: 49398515
- Manufacturer: CORTECO
- Name: COC 49398536
- Control/Trailing Arm Type: for trailing arm
-
Fitting Position: Rear Axle both sides,
Front - Required quantity: 1
- Number of Parts [parts]: 6
- Manufacturer: TEDGUM
-
Fitting Position: Front Axle Right,
outer, Lower - Vehicle Identification Number (VIN) to: 151013
- Cone Size [mm]: 18
-
Supplementary Article/Info 2: with ball joint,
with rubber mount - Material: Steel
- Length [mm]: 359
- Control/Trailing Arm Type: Control Arm
- as standard:
-
Thread Size: M14X1,
5 RHT - paired article number: 211109
- Weight [kg]: 6.494
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
-
Fitting Position: Front Axle Left,
outer, Lower - Vehicle Identification Number (VIN) to: 151013
- Cone Size [mm]: 18
-
Supplementary Article/Info 2: with ball joint,
with rubber mount - Material: Steel
- Length [mm]: 359
- Control/Trailing Arm Type: Control Arm
- as standard:
-
Thread Size: M14X1,
5 RHT - paired article number: 211110
- Weight [kg]: 6.533
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
- Vehicle Identification Number (VIN) to: 151013
- Fitting Position: Front Axle Right
- Material: Sheet Steel
- Control/Trailing Arm Type: Control Arm
- paired article number: 49398536
- Name: COC 49398515
- Manufacturer: CORTECO
- Model Year to: 2011
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Front Axle,
Left - Material: Sheet Steel
- Cone Size [mm]: 21.5
-
Cone Pitch: 1:
6 - paired article number: JTC2216
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle Right
- Control/Trailing Arm Type: Control Arm
- Manufacturer: MAGNETI MARELLI
- Fitting Position: Front Axle Left
- Control/Trailing Arm Type: Control Arm
- Manufacturer: MAGNETI MARELLI
- Model Year to: 2011
-
Fitting Position: Lower,
Front Axle Left - Control/Trailing Arm Type: Control Arm
-
Supplementary Article/Info 2: with ball joint,
with rubber mount - Material: Sheet Steel
- Replace in pairs only:
- reinforced version:
- with environmental seal: Carbon neutral
- Required quantity: 1
-
paired article number: 716 050 0034/
HD -
Name: Ootshoob,
kndmik - Manufacturer: MEY
General Information: No risk of leakage: MEYLE-HD full-rubber bushing with optimized rubber shape for a significantly longer lifetime.
- Model Year to: 2011
-
Fitting Position: Lower,
Front Axle Right - Control/Trailing Arm Type: Control Arm
-
Supplementary Article/Info 2: with ball joint,
with rubber mount - Material: Sheet Steel
- Replace in pairs only:
- reinforced version:
- with environmental seal: Carbon neutral
- Required quantity: 1
-
paired article number: 716 050 0033/
HD -
Name: Ootshoob,
kndmik - Manufacturer: MEY
General Information: No risk of leakage: MEYLE-HD full-rubber bushing with optimized rubber shape for a significantly longer lifetime.
- Model Year to: 2011
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Front Axle,
Left - Material: Sheet Steel
- Article number of recommended accessories: 39098 01
- paired article number: 36171 01
- Cone Size [mm]: 21.5
-
Cone Pitch: 1:
6 - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer! Name: Roolimine - Kndmik P. FORD MONDEO/S-MAX/GALAXY 07- LE
- Model Year to: 2011
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Front Axle,
Right - Material: Sheet Steel
- Article number of recommended accessories: 39098 01
- paired article number: 36170 01
- Cone Size [mm]: 21.5
-
Cone Pitch: 1:
6 - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer! Name: Roolimine - Kndmik P. FORD MONDEO/S-MAX/GALAXY 07- PR
- Vehicle Identification Number (VIN) to: 151013
- Wheelbase: not for extended wheelbase
-
Fitting Position: Lower,
Front Axle, Left - Control/Trailing Arm Type: Control Arm
- Required quantity: 1
- Cone Size [mm]: 18
- Material: Sheet Steel
- Mounting Type: Hydro Mount
- Supplementary Article/Supplementary Info: with holder
-
Supplementary Article/Info 2: with ball joint,
with rubber mount - Mounting points diameter [mm]: 14.3
-
paired article number: G6-
1385 -
External Thread [mm]: M14 x 1,
50 RHT M - Manufacturer: OPTIMAL ZAWIESZENIE
- Vehicle Identification Number (VIN) from: 151014
- Control/Trailing Arm Type: Control Arm
- Quantity Unit: Set
-
Fitting Position: Lower,
Front Axle Left - Cone Size [mm]: 18
- Material: Aluminium
- Rod/Strut: Push Rod
- Quality class: PJ
- Name: Control arm left
- Vehicle Identification Number (VIN) from: 151014
- Control/Trailing Arm Type: Control Arm
- Quantity Unit: Set
-
Fitting Position: Lower,
Front Axle Right - Cone Size [mm]: 18
- Material: Aluminium
- Rod/Strut: Push Rod
- Quality class: PJ
- Name: Control arm right
- Fitting Position: Front Axle Left
- Control/Trailing Arm Type: Control Arm
- Material: Sheet Steel
- paired article number: 821 0654 10
- SVHC: No SVHC present!
-
Name: Ootshoob,
kndmik - Manufacturer: FAG
- Fitting Position: Front Axle Right
- Control/Trailing Arm Type: Control Arm
- Material: Sheet Steel
- paired article number: 821 0653 10
- SVHC: No SVHC present!
-
Name: Ootshoob,
kndmik - Manufacturer: FAG
-
Fitting Position: Front Axle Left,
Lower -
Supplementary Article/Info 2: with ball joint,
with rubber mount - Control/Trailing Arm Type: Control Arm
- paired article number: 58043102
-
Warranty: 3 years warranty or until 75,
000km - Manufacturer: METZGER
-
Fitting Position: Front Axle Right,
Lower -
Supplementary Article/Info 2: with ball joint,
with rubber mount - Control/Trailing Arm Type: Control Arm
- paired article number: 58043201
-
Warranty: 3 years warranty or until 75,
000km - Manufacturer: METZGER
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Front Axle Right,
Lower -
External Thread 2 [mm]: M14x1,
5 - Weight [kg]: 6.43
- Manufacturer: RTS
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Front Axle Left,
Lower - Weight [kg]: 6.43
-
External Thread 2 [mm]: M14x1,
5 - Manufacturer: RTS
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Front Axle Right,
Lower - Length [mm]: 353
-
Thread Size: M14 x 1,
5 - Cone Size [mm]: 18
- Inner Diameter [mm]: 14
- paired article number: 92981AL
- Name: ALT 92982AL
- Manufacturer: ALTE AUTOMOTIVE
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Front Axle Left,
Lower - Length [mm]: 353
-
Thread Size: M14 x 1,
5 - Cone Size [mm]: 18
- Inner Diameter [mm]: 14
- paired article number: 92982AL
- Name: ALT 92981AL
- Manufacturer: ALTE AUTOMOTIVE
- Model Year from: 2012
- Control/Trailing Arm Type: Control Arm
- Supplementary Article/Supplementary Info: with accessories
-
Fitting Position: Lower Front Axle,
Left, outer - paired article number: JTC3705
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
- Model Year from: 2012
- Control/Trailing Arm Type: Control Arm
- Supplementary Article/Supplementary Info: with accessories
-
Fitting Position: Lower Front Axle,
Right, outer - paired article number: JTC3704
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
- Model Year from: 2011
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Front Axle,
Right - paired article number: 44579 01
- Manufacturer: LEMFORDER
SVHC: No information available, please contact the manufacturer!
- Model Year from: 2011
- Control/Trailing Arm Type: Control Arm
-
Fitting Position: Front Axle,
Left - paired article number: 44580 01
- Manufacturer: LEMFORDER
SVHC: No information available, please contact the manufacturer!