Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Anduritüüp: NTC-
andur - Montaaživiis: kruvitud
- Pistikukatte kuju: ristkülik
- Pistikkontaktide arv: 2
- Pistiku värv: must
- Võtmekaugus: 19
- Keermemõõt: M12x1.5
- OE-numbri jaoks: 195051110100
- Piirangutega toode/piirangu info 2: koos rõngastihendiga
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: NRF
- Construction Year from: 04.1988
-
Keermemõõt: M12x1,
5 - Pistikkontaktide arv: 2
- Korpusevärv: must
- Manufacturer: FAE
- Keermemõõt: M12x1.5
- Manufacturer: VERNET
- Engine Code: B 234 F
-
Thread Size: M12x1,
5 - Spanner Size: 19
-
for article number: 1.880.149,
1.880.151 -
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
- Engine Code: B 234 F
-
Keermemõõt: M12x1,
5 - Võtmekaugus: 19
-
tootekoodile: 7.8149,
7.8151 - Manufacturer: FACET
- Engine Code: B 234 F
- Name: DETONATSIOONIANDUR
- Manufacturer: EPS
-
Thread Size: M12 x 1,
5 - Spanner Size: 19
- Number of pins: 2
- Manufacturer: ERA
- Engine Code: B 234 F
- Manufacturer: FACET
- Construction Year from: 04.1988
- Manufacturer: BOSCH
- Number of pins: 2
- Weight [kg]: 0.05
- Manufacturer: ERA
- Pistikkontaktide arv: 2
-
Keermemõõt: M12x1,
5 - Värv: must
- Manufacturer: VIEROL
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Manufacturer: VEMO GERMANY
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Manufacturer: NRF
Manufacturer: MAGNETI MARELLI
- Engine Code: B 234 F
-
Inch Thread [inch]: 5/
8- 18UNF -
Thread Size: 5/
8- 18UNF - Spanner Size: 19
- Manufacturer: EPS
- Takistus [oom]: 170
- Kaablipikkus (mm): 500
-
Anduritüüp: Induktiivandur,
passiivne andur - Pistikkontaktide arv: 3
- Ühenduste arv: 3
- Nominaalpinge (V): 12
-
Installatsiooni sügavus (mm): 23,
7 - Manufacturer: VEMO GERMANY
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Pikkus (mm): 57
-
Väliskeerme mõõde: M16 x 1,
5 - Võtmekaugus: 19
- Ühenduste arv: 2
- Pealispind: tsingitud
-
Kaal (kg): 0,
05 - Manufacturer: FEBI
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: B 234 F
- Length [mm]: 520
- Name: EP 1.953.397
- Manufacturer: EPS
- Resistor [Ohm]: 180
- Cable Length [mm]: 485
- Number of pins: 3
- Fitting Depth [mm]: 24
- Manufacturer: ERA
- Engine Code: B 234 F
- Pikkus (mm): 520
- Manufacturer: FACET
- Construction Year from: 09.1987
-
Keermemõõt: 5/
8x18 UNF - Manufacturer: VERNET
- Lambda andur: Sond
- Ülekandeliinide arv: 3
- Manufacturer: KAMOKA
-
Thread Size: 5/
8'' x 18 UNF - Manufacturer: ERA
- Pistikkontaktide arv: 3
- Pistikukatte kuju: ristkülik
- Manufacturer: FAE
- Pistikkontaktide arv: 2
- Piirangutega toode/piirangu info 2: ilma kaablita
- Korpusevärv: must
- Manufacturer: FAE
- Anduritüüp: Induktiivandur
- Piirangutega toode/piirangu info 2: koos ühendusosadega
- Kaablipikkus (mm): 530
- Pistikkontaktide arv: 3
-
Name: ANDUR,
VNTVOLL - Manufacturer: MEY
- Engine Code: B 234 F
-
Name: ANDUR,
DROSSELKLAPIASEND - Manufacturer: EPS
- Kaablipikkus (mm): 530
- Pistikkontaktide arv: 3
-
Name: ANDUR,
VNTVOLL - Manufacturer: DLP
- Construction Year from: 04.1988
-
Name: ANDUR,
VNTVOLL - Manufacturer: BOS
- Oxygen Sensor: Regulating Sensor
-
Exhaust System: for pre-
catalytic converter -
Lambda andur: soojendatud,
Sõrmesensor, Bistabiilne andur - Keermemõõt: M18x1.5
- Kaablipikkus (mm): 750
- Pistikkontaktide arv: 3
- Kvaliteet: OE
- Kaal (g): 95
- Brutokaal [g]: 144
- Manufacturer: DENSO
- Name: Lambda sensor
- Quality class: Q
Additional information: "Tootja: DENSO
ESCORT IV KOMBI (AWF
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
ESCORT IV KOMBI (AWF
(kvaliteediklass: Q)"
- Construction Year from: 04.1988
- Oxygen Sensor: Regulating Sensor
- Voltage [V]: 12
-
Length [mm]: 1,
670 - Guarantee: 3 years guarantee
- Number of circuits: 3
- Weight [kg]: 0.23
- Resistor [Ohm]: 4.5
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Name: CE 09SKV546
- Manufacturer: ESEN SKV
- Oxygen Sensor: Regulating Sensor
- Engine Code: B 234 F
- Construction Year from: 04.1988
- Voltage [V]: 12
-
Length [mm]: 1,
665 - Guarantee: 3 years guarantee
- Number of circuits: 3
- Weight [kg]: 0.15
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Name: CE 09SKV033
- Manufacturer: ESEN SKV
- Construction Year from: 04.1988
- Oxygen Sensor: Regulating Sensor
- Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
- Pikkus (mm): 1 700
-
Keermemõõt: M18x1,
5 - Kaablipikkus (mm): 1 530
- Ühendushulk: 3
- Lambda andur: Keere eelmääritud
- Manufacturer: VEMO GERMANY
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Oxygen Sensor: Switching-
type Oxygen Sensor - Guarantee: 3 years guarantee
- Weight [kg]: 0.23
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Lambda andur: Sond
- Pistikkontaktide arv: 3
- Kaablipikkus (mm): 1 550
- OE-numbri jaoks: 35017530
- Manufacturer: MEAT&DORIA
- Construction Year from: 04.1988
- Oxygen Sensor: Regulating Sensor
- Kaablipikkus (mm): 1 670
-
Lambda andur: Sõrmesensor,
soojendatud - Manufacturer: DELPHI
-
Name: DE ES10957-
12B1
- Construction Year from: 04.1988
- Oxygen Sensor: Regulating Sensor
- Fitting Position: before catalytic converter
- Ülekandeliinide arv: 3
- Soovituslik vahetusintervall (km): 160 000
- Ühendus/klemm: vajadusel kohandada pistikühendus
- Name: LAMBDA ANDUR
- Manufacturer: BOS
- Katalüsaatoritüüp: Katalüsaatoriga sõidukile
- Manufacturer: VEMO GERMANY
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year from: 04.1988
- Oxygen Sensor: Regulating Sensor
- Fitting Position: before catalytic converter
- Ülekandeliinide arv: 3
- pikkus üle kõige (mm): 1 700
- ka universaaltootena saadav vaata toode-nr.: 0258986504
- Soovituslik vahetusintervall (km): 100 000
- Manufacturer: BOSCH
- OE-numbri jaoks: 08 26 285
- Manufacturer: VEMO GERMANY
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year from: 08.1988
- Uus osa:
- Vana detaili tagastus mittevajalik:
- soovitatav remondimahtu suurendamine: Õhufilter
- Manufacturer: VIEROL
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: B 234 F
- Rakendustüüp: elektriline
- Pinge [V]: 12
- Manufacturer: PIERBURG
- Construction Year from: 08.1988
- Asendusosa:
- soovitatav remondimahtu suurendamine: Õhufilter
- Manufacturer: BOSCH
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks