Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Sensor Type: NTC Sensor
- Mounting Type: Bolted
- Connector Shape: rectangular
- Number of pins: 2
- Socket colour: black
- Spanner Size: 19
- Thread Size: M12x1.5
- for OE number: 195051110100
- Supplementary Article/Info 2: with seal ring
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: NRF
-
Thread Size: M12x1,
5 - Number of pins: 2
- Housing Colour: black
- Manufacturer: FAE
- Thread Size: M12x1.5
- Manufacturer: VERNET
- Engine Code: B 230 FT
-
Thread Size: M12x1,
5 - Spanner Size: 19
-
for article number: 1.880.149,
1.880.151 -
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
- Engine Code: B 230 FT
-
Thread Size: M12x1,
5 - Spanner Size: 19
-
for article number: 7.8149,
7.8151 - Manufacturer: FACET
- Engine Code: B 230 FT
- Name: DETONATSIOONIANDUR
- Manufacturer: EPS
- Engine Code: B 230 FT
- Manufacturer: FACET
Manufacturer: BOSCH
- Number of pins: 2
-
Thread Size: M12x1,
5 - Colour: black
- Manufacturer: VIEROL
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: B 230 FT
- Number of pins: 2
- Weight [kg]: 0.05
- Manufacturer: ERA
- Number of pins: 2
- Connector Shape: rectangular
- Supplementary Article/Info 2: without cable
- for OE number: 594621
- Manufacturer: MEAT & DORIA
- Engine Code: B 230 FT
-
Inch Thread [inch]: 5/
8- 18UNF -
Thread Size: 5/
8- 18UNF - Spanner Size: 19
- Manufacturer: EPS
- Required quantity: 1
- Number of pins: 3
- Sensor Type: Inductive Sensor
- Supplementary Article/Info 2: with cable
- Housing Colour: black
- Name: CZUJNIK POO½ENIA WAU KORB. VOLVO
- Manufacturer: BRM
Manufacturer: NRF
Manufacturer: MAGNETI MARELLI
- Resistor [Ohm]: 170
- Cable Length [mm]: 500
-
Sensor Type: Inductive Sensor,
Passive sensor - Number of pins: 3
- Number of connectors: 3
- Rated Voltage [V]: 12
- Fitting Depth [mm]: 23.7
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: B 230 FT
- Length [mm]: 520
- Name: EP 1.953.397
- Manufacturer: EPS
- Engine Code: B 230 FT
- Length [mm]: 520
- Manufacturer: FACET
- Construction Year from: 09.1995
-
Thread Size: 5/
8x18 UNF - Manufacturer: VERNET
- Number of pins: 2
- Supplementary Article/Info 2: without cable
- Housing Colour: black
- Manufacturer: FAE
-
Oxygen Sensor: Regulating Sensor,
Switching- type Oxygen Sensor - Construction Year to: 06.1998
- Voltage [V]: 12
- Number of circuits: 3
- Weight [kg]: 0.08
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: ENERGY
- Number of pins: 3
- Connector Shape: rectangular
- Manufacturer: FAE
- Sensor Type: Inductive Sensor
- Supplementary Article/Info 2: with connector parts
- Cable Length [mm]: 530
- Number of pins: 3
-
Name: ANDUR,
VNTVOLL - Manufacturer: MEY
-
Oxygen Sensor: Regulating Sensor,
Switching- type Oxygen Sensor - Construction Year to: 06.1998
- Voltage [V]: 12
- Guarantee: 3 years guarantee
- Number of circuits: 3
- Weight [kg]: 0.08
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV903
- Engine Code: B 230 FT
-
Name: ANDUR,
DROSSELKLAPIASEND - Manufacturer: EPS
-
Oxygen Sensor: Regulating Sensor,
Switching- type Oxygen Sensor - Construction Year to: 06.1998
-
Exhaust System: for pre-
catalytic converter - Voltage [V]: 12
- Guarantee: 3 years guarantee
- Number of circuits: 4
- Weight [kg]: 0.09
- Resistor [Ohm]: 13
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV913
-
Name: ANDUR,
VNTVOLL - Manufacturer: BOS
- Construction Year to: 01.1996
- Engine Code: B 230 FT
- Cable Length [mm]: 530
- Number of pins: 3
- Manufacturer: DELPHI
- Number of pins: 3
- Fitting Depth [mm]: 24
- Cable Length [mm]: 440
- Manufacturer: METZGER
- Construction Year to: 06.1998
-
Exhaust System: for pre-
catalytic converter - Thread Size: M18x1.5
- Cable Length [mm]: 750
- Number of pins: 3
- Manufacturer Restriction: DENSO
- Quality: OE
- Weight [g]: 95
- Gross Weight [g]: 144
- Manufacturer: DENSO
-
Name: DN DOX-
0116 -
Lisainfo: DOX-
0116 DENSO -
Additional information: DOX-
0116 DENSO
Oxygen Sensor: Regulating Sensor, Heated, Finger-type Sensor, Switching-type Oxygen Sensor
- Voltage [V]: 12
- Housing Type: with housing
- Number of pins: 6
- Guarantee: 3 years guarantee
- New Part:
- Used part return not required:
- Weight [kg]: 0.51
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV ESEN
- Construction Year to: 08.1996
- Oxygen Sensor: Regulating Sensor
- Fitting Position: before catalytic converter
- Block Separation:
- Construction Year from: 09.1996
- Number of circuits: 3
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Name: LAMBDA ANDUR
- Manufacturer: BOS
Engine Features/Arrangement: for engines with exhaust gas recirculation, for engines without exhaust gas recirculation
- Oxygen Sensor: Regulating Sensor
- Number of pins: 3
- Connector Shape: oval
- Socket colour: white
- Cable Length [mm]: 990
- for OE number: 25172669
- Manufacturer: MEAT&DORIA
- Catalytic Converter Type: for vehicles with catalytic converter
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year to: 08.1996
-
Oxygen Sensor: Regulating Sensor,
Thread pre- greased - Fitting Position: before catalytic converter
- Engine Features/Arrangement: for engines without exhaust gas recirculation
-
Line insulation design: with silicone-
coated woven- fibre insulation - Cable Length [mm]: 995
- Connector Shape: angular
-
Thread Size: M18x1,
5 -
Length [mm]: 1,
100 - Overall Length [mm]: 915
- Number of pins: 3
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for OE number: 08 26 285
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year to: 08.1996
- Oxygen Sensor: Regulating Sensor
- Fitting Position: before catalytic converter
- Engine Features/Arrangement: for engines with exhaust gas recirculation
- Block Separation:
- Construction Year from: 09.1996
- Number of circuits: 3
- Overall Length [mm]: 915
- Available as universal article as well, see article no.: 0258986502
-
Recommended change interval [km]: 160,
000 - Name: LAMBDA ANDUR
- Manufacturer: BOS
- Engine Code: B 230 FT
- Operating Mode: Electric
- Voltage [V]: 12
- Name: OHUMASSIMOOTJA
- Manufacturer: PIE
- New Part:
- Used part return not required:
- Recommended additional repairs: Air Filter
- Manufacturer: VIEROL
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Exchange Part:
- Recommended additional repairs: Air Filter
- Manufacturer: BOSCH
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks