• Installatsiooni pool: Esisild
• Läbimõõt [mm]: 57
• Pidurisüsteem: GIRLING
• Täiskomplekt:
• Name: REMONDIKOMPLEKT,PIDURISADUL
• Manufacturer: AUT
• Additional information: SE D4-1109C
• Lisainfo: SE D4-1109C

• Installatsiooni pool: Esisild
• Läbimõõt [mm]: 57
• Pidurisüsteem: Nissin, TRW, Nissan, Lucas, Akebono, Mando, WBTL
• Versioon: Basic Parts
• Manufacturer: FRENKIT
• Name: FR 257090

• Installatsiooni pool: Tagasild
• Läbimõõt [mm]: 36
• Pidurisüsteem: ATE
• Manufacturer: AUTOFREN SEINSA
• Name: SE D4-202

• Fitting Position: Front Axle
• Brake System: TRW
• for brake disc thickness [mm]: 26
• Brake Caliper Type: Brake Caliper (1 piston)
• Läbimõõt [mm]: 57
• Hulk telje kohta: 2
• Name: Remondikomplekt,Pidurisadul
• Manufacturer: QBK

• Installatsiooni pool: Tagasild
• Läbimõõt [mm]: 40
• Pidurisüsteem: ATE (Teves)
• Manufacturer: FRENKIT
• Name: FR 240003

• Installatsiooni pool: Esisild
• Läbimõõt [mm]: 40
• Pidurisüsteem: LUCAS
• Versioon: MAIN PARTS
• Manufacturer: AUTOFREN SEINSA
• Name: SE D4-203

• Installatsiooni pool: Esisild
• Läbimõõt [mm]: 57
• Pidurisüsteem: Lucas, Nissan, TRW
• Manufacturer: FRENKIT
• Name: FR 257019

• Installatsiooni pool: Tagasild
• Läbimõõt [mm]: 38
• Pidurisüsteem: ATE-LUCAS
• Manufacturer: AUTOFREN SEINSA
• Name: SE D4-096

• Installatsiooni pool: Esisild
• Läbimõõt [mm]: 57
• Pidurisüsteem: LUCAS
• Name: REMONDIKOMPLEKT,PIDURISADUL
• Manufacturer: MAX

• Installatsiooni pool: Tagasild
• Läbimõõt [mm]: 40
• Pidurisüsteem: ATE
• OE-numbri jaoks: 0004209583
• Versioon: HARD BOOT
• Name: REMONDIKOMPLEKT,PIDURISADUL
• Manufacturer: AUT

• Installatsiooni pool: Tagasild
• Läbimõõt [mm]: 36
• Pidurisüsteem: ATE (Teves)
• Manufacturer: FRENKIT

• Installatsiooni pool: Esisild
• Läbimõõt [mm]: 40
• Pidurisüsteem: LUCAS
• OE-numbri jaoks: 272880
• Manufacturer: AUTOFREN SEINSA
• Name: SE D4-136

• Installatsiooni pool: Esisild
• Läbimõõt [mm]: 57
• Pidurisüsteem: LUCAS
• Name: REMONDIKOMPLEKT,PIDURISADUL
• Manufacturer: AUT

• Fitting Position: Rear Axle
• Brake System: ATE
• for brake disc thickness [mm]: 9.6
• Brake Caliper Type: Brake Caliper (2 pistons)
• Läbimõõt [mm]: 38
• Hulk telje kohta: 2
• Name: Remondikomplekt,Pidurisadul
• Manufacturer: QBK

• Fitting Position: Rear Axle
• Brake System: ATE
• for brake disc thickness [mm]: 9.6
• Brake Caliper Type: Brake Caliper (2 pistons)
• Läbimõõt [mm]: 40
• Hulk telje kohta: 2
• Manufacturer: QUICK BRAKE
• Name: QB 114-0161

• Installatsiooni pool: Tagasild
• Läbimõõt [mm]: 38
• Pidurisüsteem: ATE (Teves)
• Manufacturer: FRENKIT
• Name: FR 238018

• Fitting Position: Front Axle
• Brake System: TRW
• for brake disc thickness [mm]: 26
• Brake Caliper Type: Brake Caliper (1 piston)
• Läbimõõt [mm]: 57
• Hulk telje kohta: 2
• Piirangutega toode/piirangu info: koos kolviga
• Name: Remondikomplekt,Pidurisadul
• Manufacturer: QBK

• Installatsiooni pool: Esisild
• Läbimõõt [mm]: 57
• Pidurisüsteem: GIRLING
• Name: Remondikomplekt,Pidurisadul
• Manufacturer: MAX

• Brake Caliper Type: Brake Caliper (2 pistons)
• Installatsiooni pool: Esisild
• Läbimõõt [mm]: 40
• Pidurisüsteem: BENDIX-BOSCH
• Manufacturer: AUTOFREN SEINSA
• Name: SE D4-060

• Installatsiooni pool: Esisild
• Läbimõõt [mm]: 38
• Pidurisüsteem: ATE
• Täiskomplekt:
• Name: SE D4-3268C
• Manufacturer: AUTOFREN SEINSA

• Installatsiooni pool: Esisild
• Läbimõõt [mm]: 57
• Pidurisüsteem: Lucas, TRW
• Versioon: Kit+Piston
• Täiskomplekt:
• Manufacturer: FRENKIT
• Name: FR 257907

• Installatsiooni pool: Tagasild
• Läbimõõt [mm]: 36
• Pidurisüsteem: ATE
• Täiskomplekt:
• OE-numbri jaoks: 1330414
• Manufacturer: AUTOFREN SEINSA
• Name: SE D4-2174C

• Installatsiooni pool: Tagasild
• Läbimõõt [mm]: 30
• Täiskomplekt:
• Pidurisüsteem: ATE
• Pidurisadulateostus: Pidurisadul (2 kolbi)
• Manufacturer: AUTOFREN SEINSA
• Name: SE D4-1584C

• Installatsiooni pool: Tagasild
• Läbimõõt [mm]: 40
• Pidurisüsteem: ATE (Teves)
• Versioon: Kit+Piston
• Täiskomplekt:
• Manufacturer: FRENKIT
• Name: FR 240908

• Installatsiooni pool: Tagasild
• Läbimõõt [mm]: 36
• Pidurisüsteem: ATE (Teves)
• Versioon: Kit+Piston
• Täiskomplekt:
• Name: FR 236918
• Manufacturer: FRENKIT

• Pidurisüsteem: ATE-LUCAS
• Läbimõõt [mm]: 38
• Installatsiooni pool: Tagasild
• Täiskomplekt:
• OE-numbri jaoks: 105263000000
• Name: REMONDIKOMPLEKT,PIDURISADUL
• Manufacturer: AUT
• Additional information: D4852C
• Lisainfo: D4852C

• Fitting Position: Rear Axle
• Brake System: ATE
• for brake disc thickness [mm]: 9.6
• Brake Caliper Type: Brake Caliper (2 pistons)
• Läbimõõt [mm]: 38
• Hulk telje kohta: 2
• Piirangutega toode/piirangu info: koos kolviga
• Manufacturer: QUICK BRAKE

• Version: Superkit
• Installatsiooni pool: Esisild
• Läbimõõt [mm]: 57
• Pidurisüsteem: TRW
• Versioon: Kit+Piston+GuidePins
• Täiskomplekt:
• Manufacturer: FRENKIT

• Installatsiooni pool: esisild paremal
• Pidurisüsteem: GIRLING
• Pidurisadulateostus: Pidurisadul (1 kolb)
• Kolvi läbimõõt [mm]: 57
• paaris tootenumbrid: 131-04-997
• pidurikettajämedusele (mm): 26
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Installatsiooni pool: esisild vasakul
• Pidurisüsteem: GIRLING
• Pidurisadulateostus: Pidurisadul (1 kolb)
• Kolvi läbimõõt [mm]: 57
• paaris tootenumbrid: 131-04-998
• pidurikettajämedusele (mm): 26
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle Left
• Brake Caliper Type: Brake Caliper (2 pistons)
• Brake System: ATE
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• paired article number: 46SKV014
• Weight [kg]: 2.9
• Brake Disc Thickness [mm]: 10
• Brake Caliper Piston Diameter [mm]: 40
• Always compare old and new part (in particular OE No.):
• Name: CE 46SKV013
• Manufacturer: ESEN SKV
• Additional information: SKV46SKV013
• Lisainfo: SKV46SKV013

• Fitting Position: Rear Axle Right
• Brake Caliper Type: Brake Caliper (2 pistons)
• Brake System: ATE
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• paired article number: 46SKV013
• Weight [kg]: 2.9
• Brake Disc Thickness [mm]: 10
• Brake Caliper Piston Diameter [mm]: 40
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV ESEN ZACISKI
• Additional information: SKV46SKV014
• Lisainfo: SKV46SKV014

• Fitting Position: Front Axle Right
• Brake Caliper Type: Brake Caliper (2 pistons)
• Brake System: BENDIX
• Guarantee: 3 years guarantee
• New Part:
• Distance of mounting bores [mm]: 150
• Used part return not required:
• paired article number: 46SKV371
• Weight [kg]: 3.16
• Brake Disc Thickness [mm]: 22
• Brake Caliper Piston Diameter [mm]: 40
• Always compare old and new part (in particular OE No.):
• Name: CE 46SKV372
• Manufacturer: ESEN SKV

• Fitting Position: Front Axle Left
• Brake Caliper Type: Brake Caliper (2 pistons)
• Brake System: BENDIX
• Guarantee: 3 years guarantee
• New Part:
• Distance of mounting bores [mm]: 150
• Used part return not required:
• paired article number: 46SKV372
• Weight [kg]: 3.15
• Brake Disc Thickness [mm]: 22
• Brake Caliper Piston Diameter [mm]: 40
• Always compare old and new part (in particular OE No.):
• Name: CE 46SKV371
• Manufacturer: ESEN SKV

• Fitting Position: Front Axle Right
• Pidurisadulateostus: Sadul
• Asendusosa:
• Kolvi läbimõõt [mm]: 57
• Piirangutega toode/piirangu info: ilma kinnituseta
• Pidurisüsteem: Lucas / TRW
• paaris tootenumbrid: 24.3571-1707.5
• soovitava lisavarustuse artiklinumber: 24.0101-3601.2
• MAPP-code olemas:
• Manufacturer: ATE

• Fitting Position: Front Axle Left
• Pidurisadulateostus: Sadul
• Asendusosa:
• Kolvi läbimõõt [mm]: 57
• Piirangutega toode/piirangu info: ilma kinnituseta
• Pidurisüsteem: Lucas / TRW
• paaris tootenumbrid: 24.3571-1708.5
• soovitava lisavarustuse artiklinumber: 24.0101-3601.2
• MAPP-code olemas:
• Manufacturer: ATE

• Braking/Driving Dynamics: for vehicles without ABS
• for brake disc thickness [mm]: 22
• Fitting Position: Front Axle Left
• for piston diameter [mm]: 40
• Brake Caliper Type: Fist-type Caliper (2 pistons)
• Brake System: BENDIX
• paired article number: 6260768
• Version: IAM
• New Part:
• Used part return not required:
• Manufacturer: METZGER

• Fitting Position: behind the axle, Rear Axle Right
• paired article number: 341608
• Brake System: ATE
• Brake Disc Thickness [mm]: 9.6
• Brake Caliper Type: Brake Caliper (2 pistons)
• Diameter [mm]: 40
• Manufacturer: BUDWEG CALIPER

• Axle: not for multi-link axle
• Fitting Position: Rear Axle Right
• Pidurisadulateostus: Püsisadul (2 kolbi)
• Asendusosa:
• Kolvi läbimõõt [mm]: 38
• Pidurisüsteem: ATE
• paaris tootenumbrid: 24.9238-0087.5
• soovitava lisavarustuse artiklinumber: 13.0441-3819.2
• MAPP-code olemas:
• Manufacturer: ATE