• Lülitusrõhk [bar]: 0,5
• Keermemõõt: M14x1.5
• Anduritüüp: kinnine anduri ehitusviis
• Manufacturer: VERNET
• Additional information: OS3561 VERNET
• Lisainfo: OS3561 VERNET

• Engine Code: B 230 FT
• Pressure [bar]: 1
• Thread Size: M14x1,5
• Spanner Size: 24
• Name: OLISURVELšLITUS
• Manufacturer: EPS

• Keermemõõt: M 14x1,5
• Manufacturer: FAE

• Engine Code: B 230 FT
• Keermemõõt: M14 x 1,5
• Lülitusrõhk [bar]: 0,5
• Võtmekaugus: 24
• Pistikkontaktide arv: 1
• Kaal (kg): 0,05
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Anduritüüp: NTC-andur
• Montaaživiis: kruvitud
• Pistikukatte kuju: ristkülik
• Pistikkontaktide arv: 2
• Pistiku värv: must
• Võtmekaugus: 19
• Keermemõõt: M12x1.5
• OE-numbri jaoks: 195051110100
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Keermemõõt: M12x1.5
• Manufacturer: VERNET

• Engine Code: B 230 FT
• External Thread [mm]: M12x1,5
• Thread Size: M12x1,5
• Spanner Size: 19
• for article number: 1.880.149, 1.880.151
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Pistikkontaktide arv: 2
• Keermemõõt: M12x1,5
• Värv: must
• Kaal (kg): 0,032
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: B 230 FT
• Number of pins: 2
• Weight [kg]: 0.05
• Manufacturer: ERA

• Engine Code: B 230 FT
• Name: DETONATSIOONIANDUR
• Manufacturer: EPS

Manufacturer: BOSCH

• Engine Code: B 230 FT
• Inch Thread [inch]: 5/8-18UNF
• Thread Size: 5/8-18UNF
• Spanner Size: 19
• Manufacturer: EPS

Manufacturer: MAGNETI MARELLI

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with cable
• Housing Colour: black
• Name: CZUJNIK POO½ENIA WAU KORB. VOLVO
• Manufacturer: BRM

• Takistus [oom]: 170
• Kaablipikkus (mm): 500
• Anduritüüp: Induktiivandur, passiivne andur
• Piirangutega toode/piirangu info 2: väntvõlli jaoks
• Pistikkontaktide arv: 3
• Ühenduste arv: 3
• Nominaalpinge (V): 12
• Installatsiooni sügavus (mm): 23,7
• Kaal (kg): 0,095
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Cable Length [mm]: 485
• Number of pins: 3
• Resistor [Ohm]: 180
• Fitting Depth [mm]: 24
• Manufacturer: ERA

• Engine Code: B 230 FT
• Ühenduste arv: 2
• Kaal (kg): 0,054
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 09.1995
• Keermemõõt: 5/8x18 UNF
• Manufacturer: VERNET

• Piirangutega toode/piirangu info 2: ilma kaablita
• Pistikkontaktide arv: 2
• Korpusevärv: must
• Manufacturer: FAE

• Pistikkontaktide arv: 3
• Pistikukatte kuju: ristkülik
• Manufacturer: FAE

• Lambda Sensor: Regulating Probe, Lambda Sensor
• Construction Year to: 06.1998
• Voltage [V]: 12
• Number of circuits: 3
• Weight [kg]: 0.08
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV903

• Engine Code: B 230 FT
• Name: ANDUR,DROSSELKLAPIASEND
• Manufacturer: EPS

• Construction Year to: 06.1998
• Lambda Sensor: Regulating Probe
• Fitting Position: Exhaust Manifold
• Lambda andur: soojendatud
• Pistikkontaktide arv: 3
• Kaablipikkus (mm): 230
• tootekoodile: 81014E
• Kvaliteet: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Anduritüüp: Induktiivandur
• Piirangutega toode/piirangu info 2: koos ühendusosadega
• Kaablipikkus (mm): 530
• Pistikkontaktide arv: 3
• Name: ANDUR, VŽNTVOLL
• Manufacturer: MEY

• Lambda Sensor: Regulating Probe, Lambda Sensor
• Construction Year to: 06.1998
• Exhaust System: for pre-catalytic converter
• Voltage [V]: 12
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 13
• Operating Mode: Electric
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV913
• Manufacturer: ESEN SKV

Manufacturer: BOSCH

• Construction Year to: 01.1996
• Engine Code: B 230 FT
• Kaablipikkus (mm): 530
• Pistikkontaktide arv: 3
• Name: ANDUR, VŽNTVOLL
• Manufacturer: DLP

• Number of pins: 3
• Fitting Depth [mm]: 24
• Cable Length [mm]: 440
• Manufacturer: METZGER

• Construction Year to: 06.1998
• Lambda Sensor: Regulating Probe
• Exhaust System: for pre-catalytic converter
• Kvaliteet: OE
• Tootja piirang: DENSO
• Keermemõõt: M18x1.5
• Kaablipikkus (mm): 750
• Pistikkontaktide arv: 3
• Kaal (g): 95
• Lambda andur: soojendatud, Sõrmesensor, Bistabiilne andur
• Brutokaal [g]: 144
• Manufacturer: DENSO
• Name: DN DOX-0116
• Lisainfo: DOX-0116 DENSO
• Additional information: DOX-0116 DENSO

• Pistikkontaktide arv: 3
• Pistikukatte kuju: ristkülik
• Kinnitusaukude hulk: 2
• Pöördesuund: Keeramine päripäeva
• OE-numbri jaoks: 13 62 1 273 277, 77 00 680 341, 3517068
• Manufacturer: MEAT&DORIA

• Lambda andur: Sond
• Pistikkontaktide arv: 3
• Pistikukatte kuju: ovaalne
• Pistiku värv: valge
• Kaablipikkus (mm): 990
• Manufacturer: MEAT&DORIA

• Construction Year to: 08.1996
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Block Separation:
• Construction Year from: 09.1996
• Ülekandeliinide arv: 3
• Soovituslik vahetusintervall (km): 160 000
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Engine Features/Arrangement: for engines with exhaust gas recirculation, for engines without exhaust gas recirculation

• Katalüsaatoritüüp: Katalüsaatoriga sõidukile
• Kaal (kg): 0,086
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 08.1996
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Engine Features/Arrangement: for engines without exhaust gas recirculation
• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Kaablipikkus (mm): 995
• Pistikukatte kuju: nurgeline
• Keermemõõt: M18x1,5
• Pikkus (mm): 1 100
• pikkus üle kõige (mm): 915
• Pistikkontaktide arv: 3
• Kaal (kg): 0,156
• Lambda andur: Keere eelmääritud
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• OE-numbri jaoks: 08 26 285
• Kaal (kg): 0,093
• Manufacturer: VEMO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 08.1996
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Engine Features/Arrangement: for engines with exhaust gas recirculation
• Block Separation:
• Construction Year from: 09.1996
• Ülekandeliinide arv: 3
• pikkus üle kõige (mm): 915
• ka universaaltootena saadav vaata toode-nr.: 0258986502
• Soovituslik vahetusintervall (km): 160 000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Pistikkontaktide arv: 6
• Manufacturer: MEAT&DORIA

• Engine Code: B 230 FT
• Rakendustüüp: elektriline
• Pinge [V]: 12
• Manufacturer: PIERBURG

• Uus osa:
• Vana detaili tagastus mittevajalik:
• soovitatav remondimahtu suurendamine: Õhufilter
• Kaal (kg): 0,447
• Manufacturer: VEMO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.