Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Engine Code: B 230 FT
- Required quantity: 4
- Catalytic Converter Type: for vehicles without catalytic convertor
- Quantity per packing unit: 10
-
Spark Plug: 1 -
Earthed Electrode, Nickel Middle Electrode - Thread Length [mm]: 19
- Diameter [mm]: 14
- for OE number: 21013707001
- Connector type: Removable SAE
- Spanner Size: 20.6
- Tightening Torque [Nm]: 22
- Weight [g]: 56
- Gross Weight [g]: 59
- alternative item: W20TT
-
Name: WIECA ZAPONOWA W20EPR-
U - Manufacturer: DEN
- for OE number: 59622A
- Spanner Size: 20
-
Spark Plug: Nickel Middle Electrode,
1 - Earthed Electrode - Thread Length [mm]: 19
- Manufacturer: KAMOKA
-
for OE number: 09482-
00299 - Spanner Size: 20
-
Spark Plug: Nickel Middle Electrode,
1 - Earthed Electrode - Thread Length [mm]: 19
- Manufacturer: KAMOKA
- Engine Code: B 230 FT
- Quantity per packing unit: 10
- Electrode Gap [mm]: 0.7
- Diameter [mm]: 21
- Length [mm]: 73.5
-
Thread Size: M14 x 1,
25 -
Spark Plug: 1 -
Earthed Electrode - Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Required quantity: 4
- Electrode Gap [mm]: 0.8
- Tightening Torque [Nm]: 28
-
Thread Size: M 14 x 1,
25 - Thread Length [mm]: 19
-
Spanner Size: 20,
8 - Spark Position [mm]: 3
- Number of pins: 1
- Name: STEKNAL
- Manufacturer: BOS
-
Fuel Type: CNG/
LPG - Supplementary Article/Info 2: Electrode gap must be set for operation on gas
-
Replace after km: 15,
000 - Required quantity: 4
- Electrode Gap [mm]: 0.8
- Tightening Torque [Nm]: 28
-
Thread Size: M 14 x 1,
25 - Thread Length [mm]: 19
-
Spanner Size: 20,
8 - Spark Position [mm]: 3
- Number of pins: 1
- Name: STEKNAL
- Manufacturer: BOS
-
Engine Code: B230FK,
FT - Electrode Gap [mm]: 0.7
- Quantity per packing unit: 4
-
Spanner Size: 20,
8 mm -
Thread Size: M14 x 1,
25 - Thread Length [mm]: 19
- Spark Position [mm]: 3
- Name: STEKNAL
- Manufacturer: NGK
-
Additional information: V-
LINE 2 -
Lisainfo: V-
LINE 2
Spark Plug: Unscrewable SAE connector, Nickel Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat
- Electrode Gap [mm]: 0.7
- Length [mm]: 126
-
Spark Plug: 1 -
Earthed Electrode - Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Engine Code: B230FK,
FT - Electrode Gap [mm]: 0.7
-
Spanner Size: 20,
8 mm -
Thread Size: M14 x 1,
25 - Thread Length [mm]: 19
- Spark Position [mm]: 3
- Name: STEKNAL
- Manufacturer: NGK
Spark Plug: Unscrewable SAE connector, Nickel Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat
-
Engine Code: B230FK,
FT - Electrode Gap [mm]: 0.7
-
Spanner Size: 20,
8 mm -
Thread Size: M14 x 1,
25 - Thread Length [mm]: 19
- Spark Position [mm]: 3
- Name: STEKNAL
- Manufacturer: NGK
Spark Plug: Nickel Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat, Fixed SAE connector
- Required quantity: 4
- Quantity per packing unit: 10
- Electrode Gap [mm]: 0.9
-
Connector type: M4/
SAE - Thread Size: M14x1.25
- Spanner Size: 21 mm
-
Quality/ Grade: Cu-
core GE - Packing Type: Carton
- Thread Length [mm]: 19
- Technical Information Number: RN9YCC
- Spark Position [mm]: 3
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 8.65
- Packaging width [cm]: 2.45
- Packaging height [cm]: 2.45
- Resistor from [kOhm]: 6
- Resistor to [kOhm]: 15
- Projection [mm]: 1.5
-
Name: CH OE004/
T10 - Manufacturer: CHAMPION
Spark Plug: 1 - Earthed Electrode, with gasket seat, Copper Centre Electrode
- Required quantity: 4
-
Fuel Type: Liquefied Petroleum Gas
(LPG) - Alternatively:
- electrode gap to be set [mm]: 0.7
-
Recommended change interval [km]: 20,
000 - Quantity per packing unit: 10
- Electrode Gap [mm]: 0.8
-
Connector type: M4/
SAE -
Thread Size: M14x1,
25 - Spanner Size: 21 mm
-
Spark Plug: 1 -
Earthed Electrode, with gasket seat - Thread Length [mm]: 19
-
Technical Information Number: 14 R-
6 DU - Self-service suited packaging see parts list:
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Name: STEKNAL
- Manufacturer: BERU
- Engine Code: B 230 FT
- Required quantity: 4
- Catalytic Converter Type: for vehicles without catalytic convertor
- Quantity per packing unit: 4
-
Spark Plug: 1 -
Earthed Electrode, Nickel Middle Electrode - Thread Length [mm]: 19
- Diameter [mm]: 14
- Country Specific Design: Japan
- Connector type: Crimped SAE
- Spanner Size: 20.6
- Tightening Torque [Nm]: 22
- Weight [g]: 58
- Gross Weight [g]: 61
-
alternative item: IW20TT,
IW20 - Manufacturer: DENSO
- Name: DN W20TT
- Quality class: Q
Additional information: "Tootja: DENSO
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"
- Required quantity: 4
- Quantity Unit: Kit
- Electrode Gap [mm]: 0.8
- Tightening Torque [Nm]: 28
-
Thread Size: M 14 x 1,
25 - Thread Length [mm]: 19
-
Spanner Size: 20,
8 - Spark Position [mm]: 3
- Number of pins: 1
- Name: STEKNAL
- Manufacturer: BOS
- Engine Code: B 230 FT
- Required quantity: 4
- Catalytic Converter Type: for vehicles without catalytic convertor
-
Fuel Type: CNG/
LPG - Quantity per packing unit: 4
- Thread Length [mm]: 19
- Diameter [mm]: 14
- Country Specific Design: Japan
- Connector type: Solid SAE
- Spanner Size: 20.6
- Tightening Torque [Nm]: 22
- Weight [g]: 58
- Gross Weight [g]: 61
- alternative item: IW20TT
- Manufacturer: DENSO
- Name: DN IW20TT
- Quality class: Q
Spark Plug: with resistor, 1 - Earthed Electrode, Iridium Middle Electrode
Additional information: "Tootja: DENSO
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"
-
Engine Code: B230FK,
FT - Electrode Gap [mm]: 0.7
-
Spanner Size: 20,
8 mm -
Thread Size: M14 x 1,
25 - Thread Length [mm]: 19
- Spark Position [mm]: 3
- Name: STEKNAL
- Manufacturer: NGK
Spark Plug: Unscrewable SAE connector, Iridium Middle Electrode, 1 - Earthed Electrode, Interference Suppression 5 kOhm, with gasket seat
- Required quantity: 4
- Alternatively:
- Quantity per packing unit: 4
- Electrode Gap [mm]: 0.8
- Connector type: SAE
- Thread Size: M14x1.25
- Spanner Size: 21 mm
- Quality/ Grade: Pt GE
- Packing Type: Carton
- Thread Length [mm]: 19
- Technical Information Number: RN8WYPB3
- Spark Position [mm]: 3
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 10
- Packaging width [cm]: 2.5
- Packaging height [cm]: 2.5
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Projection [mm]: 1.5
- Name: CH CCH9804
- Manufacturer: CHAMPION
Spark Plug: 1 - Earthed Electrode, with gasket seat, Iridium Middle Electrode
-
Engine Code: B230FK,
FT - Electrode Gap [mm]: 0.7
-
Spanner Size: 20,
8 mm -
Thread Size: M14 x 1,
25 -
Fuel Type: CNG/
LPG -
Recommended change interval [km]: 60,
000 - Name: STEKNAL
- Manufacturer: NGK
- Lisainfo: LPG2
- Additional information: LPG2
Spark Plug: Unscrewable SAE connector, Iridium Middle Electrode
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks