• Thread Size: M12x1,5
• Spanner Size: 19
• Manufacturer: JPN

Manufacturer: MAGNETI MARELLI

• Engine Code: 1ZR-FAE
• Thread Size: M12x1,5
• Spanner Size: 19
• Manufacturer: FACET

• Engine Code: 1ZR-FAE
• Thread Size: M12x1,5
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Number of pins: 2
• Connector Shape: oval
• Socket colour: white
• Thread Size: M 12x1,5
• Sensor Type: NTC Sensor
• Spanner Size: 19 mm
• for OE number: 1920KP
• Manufacturer: MEAT&DORIA

• for OE number: 90919-05060
• Sensor Type: Hall Sensor
• Number of pins: 3
• Fitting Depth [mm]: 30
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Fabrication Number: ECP-TY-014
• Manufacturer: NTY

• Thread Size: M 12x1,5
• Number of pins: 2
• Housing Colour: white
• Manufacturer: FAE

• Sensor Type: Active sensor
• Manufacturer: KAMOKA

• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fabrication Number: ESS-TY-001
• Manufacturer: NTY

• Construction Year to: 10.2017
• Name: DETONATSIOONIANDUR
• Manufacturer: BOS

• Fabrication Number: ECM-TY-003
• Manufacturer: NTY

• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring, without cable
• Connector Shape: oval
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Required quantity: 2
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Name: CZUJNIK POO½ENIA WAKA ROZRZ. TOYOTA/LEXUS
• Manufacturer: BRM

• Number of pins: 2
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Manufacturer: MAGNETI MARELLI

• Number of connectors: 3
• Manufacturer: JPN

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Number of pins: 3
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 2
• Manufacturer: JPN

• Engine Code: 1ZRFAE-HTWVM
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Name: VA 366136
• Manufacturer: VALEO

• Oxygen Sensor: Regulating Sensor
• Number of circuits: 4
• Manufacturer: KAMOKA

• Cable Length [mm]: 360
• Oxygen Sensor: Heated, Thread pre-greased
• Number of circuits: 4
• Fabrication Number: ESL-TY-006
• Manufacturer: NTY

• Housing Type: with housing, without housing
• Fabrication Number: EPP-TY-006
• Manufacturer: NTY

• Oxygen Sensor: Diagnostic Probe
• Cable Length [mm]: 900
• Manufacturer: NTY

• Number of pins: 2
• Connector Shape: oval
• Manufacturer: METZGER

• Engine Code: 1ZR-FAE
• Manufacturer Restriction: DENSO
• Country Specific Design: Japan
• Manufacturer: FACET

• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.06
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Construction Year to: 02.2015
• Oxygen Sensor: Diagnostic Probe, Finger-type Sensor
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Mounting Type: Bolted
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: Andur,ohuvotu rohk
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Quality: OE
• Weight [g]: 103
• Gross Weight [g]: 147
• Manufacturer: DENSO
• Name: DN DOX-0109
• Lisainfo: DOX-0109 DENSO
• Additional information: DOX-0109 DENSO

Oxygen Sensor: Diagnostic Probe, Heated, Finger-type Sensor, Switching-type Oxygen Sensor

• Number of pins: 5
• Housing Type: without housing
• Manufacturer: JP GROUP
• Lisainfo: Air Mass Sensor
• Additional information: Air Mass Sensor

• Number of pins: 3
• Pressure from [kPA]: 13
• Name: DE PS20080-12B1
• Manufacturer: DELPHI

• Engine Code: 1ZR-FAE
• Required quantity: 2
• Name: EP 1.953.713
• Manufacturer: EPS

• Fitting Position: Front, after catalytic converter
• Length [mm]: 400
• Thread Size: M18x1.5-6e
• Number of pins: 4
• Oxygen Sensor: Heated, Planar Sensor
• Manufacturer: KAVO

• Sensor Type: Hall Sensor
• Number of pins: 3
• Housing Colour: black
• Manufacturer: FAE

• Number of pins: 2
• Manufacturer: DELPHI
• Name: DE AS10172

• Oxygen Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 370
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.13
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV749

• Oxygen Sensor: Regulating Sensor, Thread pre-greased
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-TY-011
• Manufacturer: NTY

• Fitting Position: Intake Manifold
• Colour: black
• Number of pins: 3
• Manufacturer: FAE

• Construction Year to: 10.2017
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Number of pins: 3
• Connector Shape: oval
• Manufacturer: METZGER

• Number of pins: 2
• Manufacturer: FAE

• Required quantity: 2
• Number of pins: 3
• Country Specific Design: Japan
• not for country specific design: Japan
• Weight [g]: 19
• Gross Weight [g]: 46
• Name: DN DCPS0109
• Manufacturer: DENSO

• Fitting Position: before catalytic converter
• Cable Length [mm]: 405
• Manufacturer: DLP

Oxygen Sensor: Regulating Sensor, Switching-type Oxygen Sensor, Heated Name: SONDA LAMBDA TOYOTA AURIS, AVENSIS, COROLLA, RAV 4, VERSO, YARIS 06-

• Oxygen Sensor: Diagnostic Probe, Planar Sensor, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 375
• Name: DE ES21107-12B1
• Manufacturer: DELPHI

• Number of connectors: 5
• Manufacturer: JPN

• Engine Code: 1ZR-FAE
• Fitting Position: after catalytic converter
• Cable Length [mm]: 350
• Conductor Number: 4
• Supplementary Article/Info 2: with fastening material
• Available as universal article as well, see article no.: 10.8235
• Number of circuits: 4
• Manufacturer: FACET

Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased

• Construction Year to: 10.2017
• Manufacturer: BOSCH

• Engine Code: 1ZR-FAE
• Pressure from [kPA]: 10
• Pressure to [kPA]: 139
• Output Voltage, from [V]: 0.895
• Output Voltage, up to [V]: 4.638
• Supplementary Article/Info 2: without fastening clamp
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: EPS

• Oxygen Sensor: Regulating Sensor
• Exhaust System: for pre-catalytic converter
• Construction Year from: 03.2015
• for OE number: 89467-52060
• Length [mm]: 400
• Number of pins: 4
• Manufacturer: FAE ELEKTRYKA

• Construction Year to: 09.2013
• Vehicle Identification Number (VIN): LVGDU2*R*********, NMTDE2*R*********
• Fitting Position: before catalytic converter
• Oxygen Sensor: Regulating Sensor, Heated
• Block Separation:
• Construction Year from: 03.2015
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 350
• Weight [kg]: 0.08
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Housing Type: without housing
• Manufacturer: VDO

• Number of connectors: 3
• Weight [kg]: 0.017
• for OE number: 89421-26030
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Measuring Range from [kPa]: 10
• Measuring Range to [kPa]: 138.7
• Measuring Range from [V]: 0.89
• Measuring Range to [V]: 4.64
• Manufacturer: VERNET

• Thread Size: M18x1.5
• Cable Length [mm]: 415
• Number of pins: 4
• Manufacturer Restriction: DENSO
• for OE number: 894650E140
• Quality: OE
• Weight [g]: 96
• Gross Weight [g]: 124
• Manufacturer: DENSO
• Name: DN DOX-0644

Oxygen Sensor: Diagnostic Probe, Heated, Finger-type Sensor, Thread pre-greased, Switching-type Oxygen Sensor

• Number of connectors: 2
• Weight [kg]: 0.044
• for OE number: 8961520090
• Name: DETONATSIOONIANDUR
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Alternatively:
• Number of pins: 5
• Manufacturer: ERA

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Housing Type: without housing
• Manufacturer: BREMI

• Construction Year from: 03.2015
• Construction Year to: 10.2017
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 379
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Oxygen Sensor: Regulating Sensor
• Exhaust System: for pre-catalytic converter
• Construction Year to: 03.2015
• for OE number: 89467-12030
• Length [mm]: 400
• Number of pins: 4
• Manufacturer: FAE ELEKTRYKA

• Housing Type: without housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Manufacturer: DELPHI
• Name: DE AF10347-12B1

• Mounting Type: Plugged
• Number of pins: 5
• Supplementary Article/Supplementary Info: without suction pipe
• Assy./disassy. by qualified personnel required!:
• Name: HE 8ET009142961
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 02.2015
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 375
• Manufacturer: BOSCH

• Oxygen Sensor: Switching-type Oxygen Sensor
• Voltage [V]: 12
• Guarantee: 3 years guarantee
• Weight [kg]: 0.08
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV111
• Manufacturer: ESEN SKV

• Number of pins: 5
• for OE number: 22204-28010
• Quality: OE
• Operating Mode: Electric
• Gross Weight [g]: 58
• alternative item: -
• Manufacturer: DENSO
• Name: DN DMA-0111

Additional information: "Tootja: DENSO
NOAH (ZRR7/), 12.01-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
NOAH (ZRR7/), 12.01-
(kvaliteediklass: Q)"

• Construction Year from: 03.2015
• Exhaust System: for pre-catalytic converter
• for OE number: 89467-52060, 8946774040
• Thread Size: M18x1.5
• Cable Length [mm]: 375
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 88
• Gross Weight [g]: 116
• Manufacturer: DENSO
• Name: DN DOX-0566
• Quality class: Q

Oxygen Sensor: Regulating Sensor, Heated, Finger-type Sensor, Broadband Oxygen Sensor, Thread pre-greased

• Construction Year to: 03.2015
• Exhaust System: for pre-catalytic converter
• for OE number: 89467-12030, 89467-50010
• Thread Size: M18x1.5
• Cable Length [mm]: 380
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 97
• Gross Weight [g]: 130
• Manufacturer: DENSO
• Name: DN DOX-0503

Oxygen Sensor: Regulating Sensor, Heated, Finger-type Sensor, Broadband Oxygen Sensor, Thread pre-greased

• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Fitting Depth [mm]: 30.1
• Supplementary Article/Info 2: with seal ring