• Vehicle Production Country: France
• Vehicle Identification Number (VIN): VNK
• Fitting Position: Rear Axle
• Brake System: Teves
• Height [mm]: 43.7
• Width [mm]: 123
• Thickness [mm]: 15
• Wear Warning Contact: with acoustic wear warning
• Manufacturer: JP GROUP
• Lisainfo: Brake Pad Set, disc brake
• Additional information: Brake Pad Set, disc brake

• Vehicle Production Country: Japan
• Vehicle Identification Number (VIN): JTD
• Fitting Position: Rear Axle
• Brake System: Akebono
• Height [mm]: 42.6
• Width [mm]: 99
• Thickness [mm]: 14.3
• Wear Warning Contact: with acoustic wear warning
• Lisainfo: Brake Pad Set, disc brake
• Additional information: Brake Pad Set, disc brake

• Vehicle Production Country: France
• Fitting Position: Front Axle
• Brake System: ATE
• Height 1 [mm]: 58.2
• Height 2 [mm]: 61
• Width 1 [mm]: 151.3
• Width 2 [mm]: 150.1
• Thickness [mm]: 17.8
• Wear Warning Contact: with acoustic wear warning
• Manufacturer: JP GROUP
• Lisainfo: Brake Pad Set, disc brake
• Additional information: Brake Pad Set, disc brake

• Vehicle Production Country: France
• Fitting Position: Rear Axle
• Inner brake drum diameter [mm]: 203
• Width [mm]: 38
• Supplementary Article/Supplementary Info: with lever
• Lisainfo: Brake Shoe Set
• Additional information: Brake Shoe Set

• Filter type: In-Line Filter
• Length [mm]: 83
• Inner Diameter [mm]: 40
• Inner Diameter 1 [mm]: 20
• Outer Diameter [mm]: 71
• for OE number: 23300-21030
• Manufacturer: ASHIKA-FILTRY

• Filter type: In-Line Filter
• Length [mm]: 83
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 71
• Inner Diameter 1 [mm]: 20
• Manufacturer: DENCKERMANN FILTRY

• Filter type: In-Line Filter
• Length [mm]: 83
• Inner Diameter [mm]: 40
• Inner Diameter 1 [mm]: 20
• Outer Diameter [mm]: 71
• for OE number: 23300-21030
• Manufacturer: JAPKO

• Diameter [mm]: 71
• Height [mm]: 86
• Filter type: In-Line Filter
• Manufacturer: ACKOJA

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle
• Vehicle Production Country: France
• Brake System: AP Lockheed
• Supplementary Article/Supplementary Info: with lever
• Width [mm]: 38
• Piston Diameter [mm]: 20.6
• Inner brake drum diameter [mm]: 203
• Test Mark: ECE R90
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle
• Width [mm]: 123
• Thickness [mm]: 15
• Height [mm]: 44
• Wear Warning Contact: with acoustic wear warning
• Brake System: ATE
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Vehicle Production Country: France
• Construction Year from: 03.2009
• Construction Year to: 08.2011
• Fitting Position: Rear Axle
• Diameter [mm]: 203
• Width [mm]: 40
• Brake System: LOCKHEED
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle
• Braking/Driving Dynamics: for vehicles with VSC
• Country Specific Design: Japan
• not for country specific design: Japan
• Vehicle Production Country: Japan
• not for vehicle production country: Japan
• Manufactured in: Japan
• not manufactured in: Japan
• developed in: Japan
• quality-tested in: Japan
• Engine Production Country: Japan
• Construction Year from: 01.2009
• Wear Warning Contact: with acoustic wear warning
• Height 1 [mm]: 42.6
• Brake System: AKEBONO
• Width 1 [mm]: 98.6
• Thickness 1 [mm]: 14.4
• Manufacturer: PROFIPOWER

• Fitting Position: Rear Axle
• Braking/Driving Dynamics Article Reference: for ABS
• Wear Warning Contact: with acoustic wear warning
• Height 1 [mm]: 43.8
• Brake System: ATE
• Width 1 [mm]: 123
• Thickness 1 [mm]: 15
• Manufacturer: JPN

• Vehicle Production Country: France
• Fitting Position: Rear Axle
• Width [mm]: 123
• Thickness [mm]: 15
• Height [mm]: 43.8
• Wear Warning Contact: with acoustic wear warning
• Brake System: ATE
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Installatsiooni pool: Esisild
• Jämedus/Tugevus (mm): 17,7
• Kulumishoiatus kontakt: koos akustilise kulumishoiatusega
• Pidurisüsteem: Teves
• Lisainfo: Sama kui 4863603810
• Additional information: Sama kui 4863603810

• Fitting Position: Front Axle
• Vehicle Production Country: France
• Brake System: ATE
• Width 1 [mm]: 151.3
• Width 2 [mm]: 150.1
• Thickness [mm]: 17.8
• Test Mark: ECE R90
• Wear Warning Contact: with acoustic wear warning
• Height 1 [mm]: 58.2
• Height 2 [mm]: 61
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle
• Manufacturer Restriction: ATE
• Thickness [mm]: 14.5
• Test Mark: R90
• Width [mm]: 123
• Height [mm]: 44
• Wear Warning Contact: with acoustic wear warning
• Manufacturer: KAVO

• Fitting Position: Front Axle
• Thickness [mm]: 17
• Wear Warning Contact: with acoustic wear warning
• Brake System: Continental
• Width 1 [mm]: 151
• Width 2 [mm]: 150
• Height 1 [mm]: 59
• Height 2 [mm]: 62
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle
• Braking/Driving Dynamics Article Reference: for ABS
• Wear Warning Contact: with acoustic wear warning
• Height 1 [mm]: 43.8
• Brake System: ATE
• Width 1 [mm]: 123
• Thickness 1 [mm]: 15
• Manufacturer: PROFIPOWER

• Filter type: Filter Insert
• Height [mm]: 88
• Outer Diameter [mm]: 91
• Fitting Position: in fuel tank
• Weight [kg]: 0.156
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Brake System: TEVES
• Width [mm]: 123
• Height [mm]: 43.7
• Thickness [mm]: 15
• WVA Number: 21574
• Wear Warning Contact: incl. wear warning contact
• Number of wear indicators [per axle]: 2
• Operating Mode: Mechanical
• Supplementary Article/Info 2: without anti-squeak plate
• Test Mark: ECE-R90
• Manufacturer: VALEO
• Name: VA 301028

• Fitting Position: Front Axle
• Wear Warning Contact: with acoustic wear warning
• Manufacturer Restriction: ATE
• Thickness [mm]: 17.5
• Height 1 [mm]: 61.3
• Height 2 [mm]: 58.3
• Length 1 [mm]: 150.4
• Length 2 [mm]: 151.4
• Manufacturer: JPN

• Vehicle Identification Number (VIN): For VNK Chassis
• Vehicle Production Country: France
• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 123
• Height [mm]: 44
• Thickness [mm]: 15
• WVA Number: 24574
• Test Mark: ECE R90 APPROVED
• Manufacturer: JAPKO

• Brake System: Akebono
• Vehicle Production Country: Japan
• Specification: w/TRC
• Braking/Driving Dynamics: for vehicles with VSC
• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Test Mark: ECE-R90
• Height 1 [mm]: 42.4
• Wear Warning Contact: with acoustic wear warning
• Vibration: with vibration damper
• Width 1 [mm]: 98.6
• Thickness 1 [mm]: 15.5
• Manufacturer: METELLI UKL.HAMULCOWY

• Vehicle Production Country: France
• Fitting Position: Front Axle
• Thickness [mm]: 17.8
• Wear Warning Contact: with acoustic wear warning
• Brake System: ATE
• Width 1 [mm]: 151.3
• Width 2 [mm]: 150.1
• Height 1 [mm]: 58.2
• Height 2 [mm]: 61
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Brake System: Ate
• Vehicle Production Country: France
• Braking/Driving Dynamics: for vehicles with VSC
• Specification: w/TRC
• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Test Mark: ECE-R90
• Height 1 [mm]: 43.8
• Wear Warning Contact: with acoustic wear warning
• Vibration: with vibration damper
• Width 1 [mm]: 123
• Thickness 1 [mm]: 14.5
• Manufacturer: METELLI UKL.HAMULCOWY

• Vehicle Identification Number (VIN): For VNK Chassis
• Vehicle Production Country: France
• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Length [mm]: 123
• Height [mm]: 44
• Thickness [mm]: 15
• WVA Number: 24574
• Test Mark: ECE R90 APPROVED
• Manufacturer: ASHIKA-KLOCKI

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Manufacturer Restriction: ATE
• Width [mm]: 123.1
• Height [mm]: 43.7
• Thickness [mm]: 14.5
• Wear Warning Contact: with acoustic wear warning
• directional:
• Manufacturer: AUTO-GH

• Vehicle Production Country: France
• Construction Year from: 03.2009
• Construction Year to: 08.2011
• Fitting Position: Rear Axle
• Diameter [mm]: 203
• Width [mm]: 38
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle
• Width [mm]: 38
• Brake System: AP LOCKHEED
• Inner brake drum diameter [mm]: 203
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle
• Vehicle Production Country: Japan
• Quantity per packing unit: 4
• Width [mm]: 32
• Brake System: Akebono
• Inner brake drum diameter [mm]: 200
• Name: BR S 83 508
• Manufacturer: BREMBO

• Fitting Position: Front Axle
• Wear Warning Contact: with acoustic wear warning
• Manufacturer Restriction: ATE
• Height 1 [mm]: 58.3
• Height 2 [mm]: 61
• Brake System: ATE
• Width 1 [mm]: 151.3
• Width 2 [mm]: 151.1
• Thickness 1 [mm]: 17.9
• Thickness 2 [mm]: 17.9
• Manufacturer: PROFIPOWER

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Thickness [mm]: 17.5
• Manufacturer Restriction: ATE
• Length 1 [mm]: 150.4
• Length 2 [mm]: 151.4
• Height 1 [mm]: 61.3
• Height 2 [mm]: 58.3
• Wear Warning Contact: with acoustic wear warning
• Manufacturer: AUTO-GH

• Vehicle Identification Number (VIN): JTD
• Braking System: for vehicles with disc brakes on the rear axle
• Vehicle Production Country: Japan
• Quantity per packing unit: 4
• Fitting Position: Rear Axle
• Thickness [mm]: 14.4
• Width [mm]: 98.5
• Height [mm]: 42.2
• Wear Warning Contact: with acoustic wear warning
• Brake System: Akebono
• Manufacturer: OPTIMAL ZAWIESZENIE

• Fitting Position: Front Axle
• Brake System: Advics
• Vehicle Production Country: Japan
• Quantity per packing unit: 4
• Test Mark: ECE-R90
• Height 1 [mm]: 49.5
• Wear Warning Contact: excl. wear warning contact
• Vibration: with vibration damper
• Width 1 [mm]: 122.6
• Thickness 1 [mm]: 18
• Manufacturer: METELLI UKL.HAMULCOWY

• Vehicle Identification Number (VIN): JTD
• Vehicle Production Country: Japan
• Quantity per packing unit: 4
• Fitting Position: Rear Axle
• Thickness [mm]: 14.4
• Width [mm]: 98.6
• Height [mm]: 42.6
• Wear Warning Contact: with acoustic wear warning
• Brake System: AKEBONO
• Weight [kg]: 0.8
• Manufacturer: TOMEX BRAKES

• Fitting Position: Rear Axle
• Braking/Driving Dynamics: for vehicles with ABS
• Wear Warning Contact: with acoustic wear warning
• Brake System: ATE
• Manufacturer: OYODO

• Length [mm]: 123
• Width [mm]: 44
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 14
• Wear Warning Contact: with acoustic wear warning
• Weight [kg]: 0.85
• Observe service information:
• Manufacturer: BLUEPRINT
• Lisainfo: ADH24289 BLUEPRINT
• Additional information: ADH24289 BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN): VNK
• Vehicle Production Country: France
• Quantity per packing unit: 4
• Fitting Position: Rear Axle
• Thickness [mm]: 14.5
• Width [mm]: 123.1
• Height [mm]: 43.7
• Wear Warning Contact: with acoustic wear warning
• Brake System: ATE
• Weight [kg]: 0.82
• Manufacturer: TOMEX BRAKES

• Fitting Position: Rear Axle
• Diameter [mm]: 200
• Width [mm]: 38.5
• Manufacturer: ASHIKA

• Length [mm]: 123.2
• Width [mm]: 43.8
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 13.8
• Wear Warning Contact: with acoustic wear warning
• Weight [kg]: 0.85
• Name: SW 33 10 7258
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 07.2011
• Vehicle Production Country: France
• Fitting Position: Front Axle
• Brake System: AKEBONO
• Width [mm]: 123
• Height [mm]: 49.3
• Thickness [mm]: 18.2
• WVA Number: 24451
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: without anti-squeak plate
• Test Mark: ECE-R90
• Weight [kg]: 1.2
• Manufacturer: VALEO
• Name: VA 302076

• Length [mm]: 150.1, 151.4
• Width [mm]: 61.1, 58.3
• Test Mark: ECE R90 Approved
• Supplementary Article/Info 2: with piston clip
• Fitting Position: Front Axle
• Thickness 1 [mm]: 16.8
• Wear Warning Contact: with acoustic wear warning
• Weight [kg]: 1.45
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN): For VNK Chassis
• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 150
• Length 1 [mm]: 152
• Height [mm]: 61
• Height 1 [mm]: 58
• Thickness [mm]: 18
• WVA Number: 24022
• Test Mark: ECE R90 APPROVED
• Manufacturer: JAPKO

• Length [mm]: 123.2
• Width [mm]: 43.8
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 13.8
• Wear Warning Contact: with acoustic wear warning
• Weight [kg]: 0.85
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Width [mm]: 40
• Brake System: AP Lockheed
• Supplementary Article/Info 2: with handbrake lever
• Inner brake drum diameter [mm]: 203
• Manufacturer: BREMBO

• Fitting Position: Rear Axle
• Diameter [mm]: 200
• Width [mm]: 38.5
• Manufacturer: JAPKO

• Fitting Position: Front Axle
• Brake System: TEVES
• Width [mm]: 152
• Height [mm]: 58
• Thickness [mm]: 18
• Width 2 [mm]: 151
• Height 2 [mm]: 61.1
• Thickness 2 [mm]: 18
• WVA Number: 23202, 24022, 24023
• Wear Warning Contact: incl. wear warning contact
• Number of wear indicators [per axle]: 2
• Operating Mode: Mechanical
• Supplementary Article/Info 2: without anti-squeak plate
• Test Mark: ECE-R90
• Weight [kg]: 1.51
• Manufacturer: VALEO
• Name: VA 301076

• Fitting Position: Rear Axle
• Test Mark: R90
• Width [mm]: 39
• Inner brake drum diameter [mm]: 202
• Manufacturer: KAVO

• Vehicle Identification Number (VIN): For VNK Chassis
• Fitting Position: Front Axle
• Brake Type: Disc Brake
• Length [mm]: 150
• Length 1 [mm]: 152
• Height [mm]: 61
• Height 1 [mm]: 58
• Thickness [mm]: 18
• WVA Number: 24022
• Test Mark: ECE R90 APPROVED
• Manufacturer: ASHIKA-KLOCKI

• Fitting Position: Front Axle
• Manufacturer Restriction: ATE
• Thickness [mm]: 16.5
• Test Mark: R90
• Height 1 [mm]: 58.3
• Height 2 [mm]: 61
• Wear Warning Contact: with acoustic wear warning
• Width 1 [mm]: 151
• Width 2 [mm]: 150
• Manufacturer: KAVO

• Fitting Position: Rear Axle
• Diameter [mm]: 200
• Manufacturer: OYODO

• Construction Year to: 07.2011
• Vehicle Production Country: France
• Fitting Position: Front Axle
• Brake System: AKEBONO
• Width [mm]: 123.3
• Height [mm]: 49.3
• Thickness [mm]: 18.6
• WVA Number: 24347
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: without anti-squeak plate
• Test Mark: ECE-R90
• Weight [kg]: 1.2
• Name: VA 302647
• Manufacturer: VALEO

• Fitting Position: Rear Axle
• Vehicle Production Country: France
• Braking System: for vehicles with disc brakes on the rear axle
• Quantity per packing unit: 4
• Width [mm]: 123
• Thickness [mm]: 15
• Height [mm]: 44
• Wear Warning Contact: with acoustic wear warning
• Supplementary Article/Supplementary Info: without accessories
• Brake System: Teves
• Supplementary Article/Info 2: with anti-squeak plate
• Number of wear indicators [per axle]: 2
• WVA Number: 24574, 24575, 24576
• Name: BR P 83 087
• Manufacturer: BREMBO

• Fitting Position: Rear Axle
• Brake System: Akebono
• Construction Year from: 01.2009
• Vehicle Production Country: Japan
• Quantity per packing unit: 4
• Test Mark: ECE-R90
• Width [mm]: 32
• Inner brake drum diameter [mm]: 203
• Manufacturer: METELLI UKL.HAMULCOWY

• Length [mm]: 150, 151
• Width [mm]: 61, 58
• Test Mark: ECE R90 Approved
• Supplementary Article/Info 2: with piston clip
• Fitting Position: Front Axle
• Thickness 1 [mm]: 17
• Wear Warning Contact: with acoustic wear warning
• Weight [kg]: 1.45
• Observe service information:
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Height [mm]: 56
• Thickness [mm]: 18
• Width [mm]: 139
• WVA Number: 24336
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Supplementary Info: without accessories
• Brake System: Akebono
• Weight [kg]: 1.57
• Name: ALT 137917AAL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle
• Wear Warning Contact: with acoustic wear warning
• Manufacturer Restriction: ATE
• Thickness [mm]: 17.5
• Height 1 [mm]: 61.3
• Height 2 [mm]: 58.3
• Length 1 [mm]: 150.4
• Length 2 [mm]: 151.4
• Manufacturer: OYODO

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Test Mark: E9 90R-01825/2274
• Brake System: Continental
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• WVA Number: 24574, 24575, 24576
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: with acoustic wear warning
• Width 1 [mm]: 123.2
• Width 2 [mm]: 123
• Height 1 [mm]: 43.8
• Height 2 [mm]: 43.8
• Thickness 1 [mm]: 15
• Thickness 2 [mm]: 15
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP2007

• Fitting Position: Front Axle
• Brake System: Advics
• Specification: w/TRC
• Braking/Driving Dynamics: for vehicles with VSC
• Vehicle Production Country: Japan
• Quantity per packing unit: 4
• Test Mark: ECE-R90
• Height 1 [mm]: 54.5
• Wear Warning Contact: excl. wear warning contact
• Vibration: without vibration damper
• Width 1 [mm]: 122.7
• Thickness 1 [mm]: 17.5
• Manufacturer: METELLI UKL.HAMULCOWY

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Inner brake drum diameter [mm]: 203
• Width [mm]: 38
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LS2021

• Vehicle Production Country: France
• Quantity per packing unit: 4
• Fitting Position: Rear Axle
• Thickness [mm]: 14.8
• Width [mm]: 122.9
• Height [mm]: 43.4
• Wear Warning Contact: with acoustic wear warning
• Brake System: ATE-TEVES
• Manufacturer: OPTIMAL ZAWIESZENIE

• Fitting Position: Front Axle
• Vehicle Production Country: France
• Quantity per packing unit: 4
• Thickness [mm]: 18
• Height 1 [mm]: 58
• Height 2 [mm]: 61
• Wear Warning Contact: with acoustic wear warning
• Supplementary Article/Supplementary Info: with accessories
• Brake System: Teves
• Width 1 [mm]: 150
• Width 2 [mm]: 151
• Supplementary Article/Info 2: with piston clip, with anti-squeak plate
• Number of wear indicators [per axle]: 2
• WVA Number: 23202, 24022, 24023
• Manufacturer: BREMBO
• Name: BR P 83 085

• Fitting Position: Rear Axle
• Vehicle Production Country: Japan
• Braking System: for vehicles with disc brakes on the rear axle
• Quantity per packing unit: 4
• Width [mm]: 99
• Thickness [mm]: 14
• Height [mm]: 42
• Wear Warning Contact: with acoustic wear warning
• Supplementary Article/Supplementary Info: without accessories
• Brake System: Akebono
• Supplementary Article/Info 2: with anti-squeak plate
• Number of wear indicators [per axle]: 2
• WVA Number: 25016, 25017, 25018
• Manufacturer: BREMBO
• Name: BR P 83 133

• Fitting Position: Rear Axle
• Diameter [mm]: 203
• Width [mm]: 37
• Manufacturer: PROFIPOWER

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Number of pads: 4
• Thickness [mm]: 14.2
• Length [mm]: 123
• Height [mm]: 43.8
• Wear Warning Contact: with acoustic wear warning
• Brake Lining: Without Bevelled Edges
• Brake System: ATE
• WVA Number: 24574, 24575, 24576
• Name: SK VKBP90401A
• Manufacturer: SKF

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• FMSI Code: D2003-9233
• Test Mark: E1 90R-01881/1216
• Brake System: Continental
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• WVA Number: 23202, 24022, 24023
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: with acoustic wear warning
• Width 1 [mm]: 150.3
• Width 2 [mm]: 151.3
• Height 1 [mm]: 58.2
• Height 2 [mm]: 61
• Thickness 1 [mm]: 17.8
• Thickness 2 [mm]: 17.8
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP2005
• Additional information: LP2005 DELPHI
• Lisainfo: LP2005 DELPHI

• Vehicle Identification Number (VIN): JTD
• Vehicle Production Country: Japan
• Quantity per packing unit: 4
• Fitting Position: Front Axle
• Thickness [mm]: 17.5
• Width [mm]: 122.7
• Height [mm]: 49.6
• Supplementary Article/Supplementary Info: with accessories
• Brake System: AKEBONO
• Weight [kg]: 1.4
• Manufacturer: TOMEX BRAKES

• Brake System: Ate
• Vehicle Production Country: France
• Specification: w/TRC
• Braking/Driving Dynamics: for vehicles with VSC
• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Test Mark: ECE-R90
• Height 1 [mm]: 58.1
• Height 2 [mm]: 61
• Wear Warning Contact: with acoustic wear warning
• Vibration: with vibration damper
• Width 1 [mm]: 151.2
• Width 2 [mm]: 150.1
• Thickness 1 [mm]: 17.5
• Manufacturer: METELLI UKL.HAMULCOWY

• Fitting Position: Rear Axle
• Brake System: AKEBONO
• WVA Number: 24610
• Length 1 [mm]: 98.6
• Height 1 [mm]: 42.5
• Thickness 1 [mm]: 14.8
• Wear Warning Contact: with acoustic wear warning
• Number of wear indicators [per axle]: 2
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Number of pads: 4
• Thickness [mm]: 17.6
• Height 1 [mm]: 58.6
• Height 2 [mm]: 61.3
• Wear Warning Contact: with acoustic wear warning
• Brake Lining: With bevelled edges
• Brake System: ATE
• Length 1 [mm]: 150.3
• Length 2 [mm]: 151.4
• WVA Number: 23202, 23203, 24022
• Name: SK VKBP80295A
• Manufacturer: SKF

• Fitting Position: Front Axle
• Vehicle Production Country: France
• Quantity per packing unit: 4
• Number of pads: 4
• Thickness [mm]: 17.6
• Length [mm]: 150.4
• Height 1 [mm]: 58.6
• Height 2 [mm]: 61.3
• Wear Warning Contact: with acoustic wear warning
• Brake Lining: With bevelled edges
• Brake System: ATE
• WVA Number: 23202, 23203, 24022
• Name: SK VKBP80131A
• Manufacturer: SKF

• Width [mm]: 39
• Outer Diameter [mm]: 202
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 4
• Weight [kg]: 1.37
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Test Mark: E9 90R - 01107/200
• Thickness [mm]: 17.5
• Manufacturer Restriction: ATE
• Length 1 [mm]: 150.4
• Length 2 [mm]: 151.4
• Height 1 [mm]: 61.3
• Height 2 [mm]: 58.3
• Wear Warning Contact: with acoustic wear warning
• Manufacturer: TRW
• Quality class: Q
• Name: Brake pads

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Manufacturer Restriction: ATE
• Width [mm]: 123.1
• Height [mm]: 43.7
• Thickness [mm]: 14.5
• Wear Warning Contact: with acoustic wear warning
• Test Mark: E9 90R - 01120/518
• directional:
• Manufacturer: TRW
• Quality class: Q
• Name: Brake pads

SVHC: No information available, please contact the manufacturer!

• Vehicle Production Country: Japan
• Fitting Position: Front Axle
• Width [mm]: 122.7
• Height [mm]: 49.8
• Thickness [mm]: 17.5
• Brake System: Akebono
• Supplementary Article/Info 2: with anti-squeak plate
• Manufacturer: MEYLE

Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Manufacturer Restriction: ATE
• Length 1 [mm]: 151.4
• Length 2 [mm]: 150.4
• Height 1 [mm]: 50.2
• Height 2 [mm]: 51.3
• Thickness [mm]: 17.5
• Wear Warning Contact: with acoustic wear warning
• Test Mark: E9 90R-01107/200
• Manufacturer: TRW
• Quality class: Q
• Name: Brake pads

SVHC: No information available, please contact the manufacturer!

• Construction Year to: 07.2011
• Fitting Position: Front Axle
• Wear Warning Contact: with acoustic wear warning
• Supplementary Article/Info 2: with piston clip, with mounting manual
• Article number of recommended accessories: 1987474468, 1987474098
• Observe technical data:
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 24022
• Thickness [mm]: 16.1
• Height 1 [mm]: 58.3
• Height 2 [mm]: 61.1
• Width 1 [mm]: 149.9
• Width 2 [mm]: 151.1
• Brake System: ATE
• Manufacturer: BOSCH
• Name: BS 0986494101

• Construction Year to: 07.2011
• Fitting Position: Rear Axle
• Wear Warning Contact: with acoustic wear warning
• Supplementary Article/Info 2: with mounting manual
• Article number of recommended accessories: 1987474484, 1987474470
• Observe technical data:
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 23716
• Thickness [mm]: 14.5
• Width [mm]: 123.1
• Height [mm]: 43.7
• Manufacturer: BOSCH