• Fitting Position: Rear Axle
• Brake System: BOSCH
• Manufacturer: JP GROUP A/S
• Lisainfo: Accessory Kit, disc brake pads
• Additional information: Accessory Kit, disc brake pads

• Fitting Position: Rear Axle Left
• Surface: Zinc-coated
• Manufacturer: JP GROUP

• Fitting Position: Rear Axle Right
• Surface: Zinc-coated
• Manufacturer: JP GROUP

• Fitting Position: Front Axle
• Brake System: Bosch
• Manufacturer: QUICK BRAKE
• Name: QB 109-1218
• Additional information: 109-1218 QB
• Lisainfo: 109-1218 QB

• Fitting Position: Rear Axle
• Brake System: Bosch
• Manufacturer: QUICK BRAKE
• Name: QB 109-1298
• Additional information: 109-1298 QB
• Lisainfo: 109-1298 QB

• Fitting Position: Front Axle
• Brake System: BOSCH
• Weight [kg]: 0.04
• Manufacturer: ABS

• Fitting Position: Rear Axle
• Brake System: BOSCH
• Weight [kg]: 0.03
• Manufacturer: ABS

• Fitting Position: Front Axle, Rear Axle
• Weight [kg]: 0.03
• for OE number: BRK FITTING KIT 151
• Manufacturer: FEBI-UKLAD HAMULCOWY

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Weight [kg]: 0.04
• for OE number: BRK FITTING KIT 152
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, Rear Axle
• Weight [kg]: 0.03
• for OE number: BRK FITTING KIT 151
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Weight [kg]: 0.04
• for OE number: BRK FITTING KIT 152
• Manufacturer: BLUE PRINT HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle, Rear Axle
• Brake System: Motorcraft, Bosch
• Name: FR 901298
• Manufacturer: FRENKIT

• Fitting Position: Rear Axle
• Brake System: Bosch
• Manufacturer: AUTOFREN SEINSA
• Name: SE D4-2404A

• Fitting Position: Front Axle
• Brake System: BOSCH
• Manufacturer: AUTOFREN SEINSA
• Name: SE D4-2343A

• Fitting Position: Rear Axle
• Brake System: BOSCH
• Quality class: PJ
• Name: Brake pads fitting kit

• Fitting Position: Front Axle
• Brake System: BOSCH
• Quality class: PJ
• Name: Brake pads fitting kit

• Fitting Position: Front Axle
• Brake System: Bosch
• Manufacturer: METZGER

• Fitting Position: Front Axle Right
• Fabrication Number: HCA-TY-042
• paired article number: HCA-TY-041
• Manufacturer: NTY

• Fitting Position: Front Axle Left
• Fabrication Number: HCA-TY-041
• paired article number: HCA-TY-042
• Manufacturer: NTY

• Fitting Position: Front Axle
• Brake System: Bosch
• Manufacturer: BOSCH

• Fitting Position: Rear Axle
• Brake System: Bosch
• Quantity per packing unit: 8
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LX0354
• Quality class: PJ

Additional information: "Tootja: DELPHI
MONDEO III SEDAN (B4
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
MONDEO III SEDAN (B4
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• Manufacturer Restriction: BOSCH
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle Right
• Manufacturer: ASHIKA

• Construction Year to: 12.2007
• Fitting Position: Front Axle
• Brake System: Bosch
• Manufacturer: ATE

• Sensor Type: Inductive Sensor, Passive sensor
• Overall Length [mm]: 941
• Fitting Position: Front Axle Right
• Manufacturer: KAMOKA

• Sensor Type: Inductive Sensor, Passive sensor
• Overall Length [mm]: 1,081
• Fitting Position: Front Axle Left
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle
• for OE number: 8954402010
• Number of pins: 2
• Manufacturer: MAGNETI MARELLI
• Name: MM MWSS140

• Fitting Position: Rear Axle
• Quantity: 2
• Vehicle Production Country: Japan
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Name: DE SS21522-12B1
• Manufacturer: DELPHI

• Fitting Position: Front Axle Right
• Manufacturer: JAPKO

• Fitting Position: Front Axle Left, Front Axle Right
• Vehicle Production Country: Great Britain
• Sensor Type: Inductive Sensor
• Length [mm]: 1,000
• Number of pins: 2
• Manufacturer Restriction: Bosch
• Manufacturer: JP GROUP
• Lisainfo: Sensor, wheel speed
• Additional information: Sensor, wheel speed

• Vehicle Identification Number (VIN) from: SB#####
• Country Specific Design: Great Britain
• not for country specific design: Great Britain
• Vehicle Production Country: Great Britain
• not for vehicle production country: Great Britain
• Manufactured in: Great Britain
• not manufactured in: Great Britain
• developed in: Great Britain
• quality-tested in: Great Britain
• Engine Production Country: Great Britain
• Fitting Position: Rear Axle
• Colour: black
• Sensor Type: Passive sensor
• Length [mm]: 9
• Manufacturer: JPN

• Fitting Position: Front Axle Left
• Manufacturer Restriction: Bosch
• Number of connectors: 2
• Manufacturer: JPN

• Fitting Position: Front Axle Right
• Cable Length [mm]: 1,005
• Number of pins: 2
• Sensor Type: Passive sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of pins: 2
• Cable Length [mm]: 1,030
• Sensor Type: Passive sensor
• Fitting Position: Front Axle Right
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0083

• Fitting Position: Front Axle
• Manufacturer Restriction: BOSCH
• Spring Design: Retaining Spring
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Number of pins: 2
• Sensor Type: Passive sensor
• Cable Length [mm]: 960
• Fitting Position: Front Axle Left
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0198

• Fitting Position: Front Axle
• Brake System: Bosch
• Quantity per packing unit: 8
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LX0313
• Quality class: PJ

Additional information: "Tootja: DELPHI
206 CC (2D), 09.00-
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
206 CC (2D), 09.00-
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle Right
• Guarantee: 3 years guarantee
• Weight [kg]: 0.4
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fitting Position: Front Axle Left
• Guarantee: 3 years guarantee
• Weight [kg]: 0.37
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fitting Position: Front Axle Left
• Resistor [Ohm]: 1,500
• for OE number: 8954302040
• Number of pins: 2
• Manufacturer: MAGNETI MARELLI
• Name: MM MWSS138

• Fitting Position: Front Axle Right
• Resistor [Ohm]: 1,500
• for OE number: 8954202040
• Number of pins: 2
• Manufacturer: MAGNETI MARELLI
• Name: MM MWSS139

• Fitting Position: Front Axle Right
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.19
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV

• Fitting Position: Front Axle Left
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.17
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fitting Position: Rear Axle
• Quantity: 2
• Vehicle Production Country: Great Britain
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Manufacturer: DELPHI ELEKTRONIKA

• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.001
• for OE number: 89544-02010
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paired article number: 179886
• Fitting Position: Front Axle Right
• Weight [kg]: 0.333
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• paired article number: 179887
• Fitting Position: Front Axle Left
• Weight [kg]: 0.333
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Right
• Colour: black
• Outer Diameter [mm]: 290
• Inner Diameter [mm]: 76
• paired article number: 131-07-639
• Article number of recommended accessories: 231-04-063
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle Left
• Colour: black
• Outer Diameter [mm]: 290
• Inner Diameter [mm]: 76
• paired article number: 131-07-640
• Article number of recommended accessories: 231-04-063
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle
• Brake System: Bosch
• Manufacturer: ATE

• Vehicle Production Country: Great Britain
• Required quantity: 2
• Fitting Position: Rear Axle
• Supplementary Article/Info 2: without cable
• Colour: black
• Manufacturer: BREMI

• Fitting Position: Rear Axle, Left
• Diameter 1 [mm]: 290
• Diameter 2 [mm]: 76
• Material: Sheet Steel
• Name: CFD 613904
• Manufacturer: DACO

• Fitting Position: Rear Axle, Right
• Diameter 1 [mm]: 290
• Diameter 2 [mm]: 76
• Material: Sheet Steel
• Name: CFD 613905
• Manufacturer: DACO

• Fitting Position: Left, Rear Axle
• Manufacturer: OYODO

• Fitting Position: Rear Axle, Right
• Manufacturer: OYODO

• Fitting Position: Rear Axle Left
• Fabrication Number: HTO-TY-000
• paired article number: HTO-TY-001
• Manufacturer: NTY
• Name: NTY HTO-TY-000

• Fitting Position: Rear Axle Right
• Fabrication Number: HTO-TY-001
• paired article number: HTO-TY-000
• Manufacturer: NTY
• Name: NTY HTO-TY-001

• Fitting Position: Rear Axle Left
• paired article number: FT00158
• Manufacturer: FAST

General Information: 5-year warranty FAST offers up to 5 years warranty on this product, throughout the entire EU. The guarantee covers manufacturing and material defects. In the event of problems, we will refund you for the part or replace it with a new one. Details and warranty restrictions can be found at fastoriginal.eu

• Fitting Position: Rear Axle Right
• paired article number: FT00157
• Manufacturer: FAST

General Information: 5-year warranty FAST offers up to 5 years warranty on this product, throughout the entire EU. The guarantee covers manufacturing and material defects. In the event of problems, we will refund you for the part or replace it with a new one. Details and warranty restrictions can be found at fastoriginal.eu

• Fitting Position: Front Axle Left
• Manufacturer: ASHIKA

• Fitting Position: Rear Axle Left
• Inner Diameter [mm]: 76
• Outer Diameter [mm]: 290
• Guarantee: 3 years guarantee
• paired article number: 57SKV707
• Weight [kg]: 0.86
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 57SKV706

• Fitting Position: Rear Axle Right
• Inner Diameter [mm]: 76
• Outer Diameter [mm]: 290
• Guarantee: 3 years guarantee
• paired article number: 57SKV706
• Weight [kg]: 0.86
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 57SKV707

• Fitting Position: Rear Axle Left
• Material: Sheet Steel
• Diameter 1 [mm]: 290
• Diameter 2 [mm]: 76
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle
• Vehicle Identification Number (VIN) from: JT#####
• Vehicle Production Country: Japan
• Overall Length [mm]: 40
• Length [mm]: 10
• Sensor Type: Active sensor
• Socket colour: black
• paired article number: 31509
• Weight [kg]: 0.16
• Manufacturer: ABS

• Fitting Position: Front Axle Left
• Manufacturer: JAPKO

• Transmission Type: Manual Transmission
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Fitting Position: Front Axle Right
• Weight [kg]: 0.16
• Packaging length [cm]: 16
• Packaging width [cm]: 7
• Packaging height [cm]: 5
• Manufacturer: FEBEST

• Fitting Position: Rear Axle, Left
• Diameter 1/Diameter 2 [mm]: 290/76
• Manufacturer: YSPARTS

• Fitting Position: Right, Rear Axle
• Diameter 1/Diameter 2 [mm]: 290/76
• Manufacturer: YSPARTS

• Fitting Position: Front Axle Left
• Overall Length [mm]: 1,060
• Length [mm]: 21
• Sensor Type: Passive sensor
• Socket colour: white
• Cable Length [mm]: 980
• paired article number: 30548
• Weight [kg]: 0.23
• Manufacturer: ABS

• Fitting Position: Front Axle Right
• Overall Length [mm]: 1,060
• Length [mm]: 21
• Sensor Type: Passive sensor
• Socket colour: white
• Cable Length [mm]: 980
• paired article number: 30766
• Weight [kg]: 0.18
• Manufacturer: ABS

• Fitting Position: Rear Axle
• Vehicle Identification Number (VIN) from: SB#####
• Vehicle Production Country: Great Britain
• Overall Length [mm]: 40
• Length [mm]: 10
• Sensor Type: Passive sensor
• Socket colour: black
• paired article number: 31842
• Weight [kg]: 0.16
• Manufacturer: ABS

• Fitting Position: Front Axle Right
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 1,080
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE SS20255
• Quality class: PJ

• Fitting Position: Front Axle Left
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 1,060
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE SS20256
• Quality class: PJ

• Fitting Position: Rear Axle Left
• Weight [kg]: 0.775
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Right
• Weight [kg]: 0.78
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Production Country: Great Britain
• Fitting Position: Rear Axle
• Length [mm]: 9
• Sensor Type: Passive sensor
• Manufacturer: KAVO

• Vehicle Production Country: Japan
• Fitting Position: Rear Axle
• Required quantity: 2
• Manufacturer: METZGER

• Number of connectors: 2
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.156
• for OE number: 89544-32040
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Right
• Material: Sheet Steel
• Surface: Zinc-coated
• paired article number: 58833
• Diameter 1/Diameter 2 [mm]: 75 / 290
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle Left
• Material: Sheet Steel
• Surface: Zinc-coated
• paired article number: 58834
• Diameter 1/Diameter 2 [mm]: 75 / 290
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Fitting Position: Rear Axle Right, Rear Axle Left
• for OE number: 8954402010
• Manufacturer: MEAT&DORIA