• Length [mm]: 275
• Fabrication Number: ESL-TY-008
• Manufacturer: NTY

Fitting Position: Front, Left Front, before catalytic converter, after catalytic converter Oxygen Sensor: Regulating Sensor, Diagnostic Probe, Thread pre-greased

• Thread Size: M12x1,5
• Spanner Size: 19
• Manufacturer: JPN

Manufacturer: MAGNETI MARELLI

• Number of pins: 2
• Connector Shape: oval
• Socket colour: green
• Thread Size: M12x1,5
• Sensor Type: NTC Sensor
• Spanner Size: 19 mm
• for OE number: 8942220010
• Manufacturer: MEAT&DORIA

• Engine Code: 1AZ-FSE
• Thread Size: M12x1,5
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Engine Code: 1AZ-FSE
• Thread Size: M12x1,5
• Spanner Size: 19
• Manufacturer: FACET

• Housing Colour: green
• Number of pins: 2
• Thread Size: M 12x1,5
• Manufacturer: FAE

• Fabrication Number: ECP-TY-017
• Manufacturer: NTY

• Number of pins: 2
• Connector Shape: oval
• Socket colour: white
• Thread Size: M 12x1,5
• Sensor Type: NTC Sensor
• Spanner Size: 19 mm
• for OE number: 1920KP
• Manufacturer: MEAT&DORIA

• Number of pins: 2
• Sensor Type: Inductive Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of pins: 2
• Sensor Type: Inductive Sensor
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: 1AZ-FSE
• Supplementary Article/Info 2: without fastening clamp
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS

• Engine Code: 1AZ-FSE
• Supplementary Article/Info 2: without fastening clamp
• Manufacturer: FACET

• Fabrication Number: ESS-TY-001
• Manufacturer: NTY

• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Fitting Depth [mm]: 30.1
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Required quantity: 1
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Name: CZUJNIK POO½ENIA WAKA ROZRZ. TOYOTA
• Manufacturer: BRM

• Name: DETONATSIOONIANDUR
• Manufacturer: BOS

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV253
• Manufacturer: ESEN SKV

• Number of pins: 2
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: 1AZ-FSE
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Manufacturer: VALEO
• Name: VA 366136

• Number of pins: 3
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Required quantity: 1
• Sensor Type: Inductive Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 2
• Fitting Depth [mm]: 30
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Number of pins: 2
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP

• Number of pins: 2
• Manufacturer: JPN

• Engine Code: 1AZ-FSE
• Alternatively:
• Rotation Direction: Clockwise rotation
• Number of pins: 3
• Alternative Repair Kit: 550443
• Manufacturer: ERA

• Resistor [Ohm]: 1,100
• Number of pins: 2
• Manufacturer: JPN

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Number of pins: 2
• Manufacturer: ERA

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Thread Size: M18x1.5
• Cable Length [mm]: 655
• Number of pins: 4
• Fitting Position: Left, after catalytic converter
• Fabrication Number: ESL-TY-023
• Manufacturer: NTY

• Oxygen Sensor: Regulating Sensor, Thread pre-greased
• Fabrication Number: ESL-TY-017
• Manufacturer: NTY

Fitting Position: Left Front, Right Front, before catalytic converter

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Thread Size: M18x1.5
• Cable Length [mm]: 630
• Number of pins: 4
• Fitting Position: Right, after catalytic converter
• Fabrication Number: ESL-TY-024
• Manufacturer: NTY

• Oxygen Sensor: Regulating Sensor
• Number of circuits: 4
• Manufacturer: KAMOKA

• Required quantity: 1
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRI

• Oxygen Sensor: Diagnostic Probe
• Cable Length [mm]: 900
• Manufacturer: NTY

• Housing Type: without housing
• Fabrication Number: EPP-TY-000
• Manufacturer: NTY

• Engine Code: 1AZ-FSE
• Oxygen Sensor: Regulating Sensor, Heated
• Number of circuits: 4
• Length [mm]: 330
• Name: Lambda andur
• Manufacturer: MAX

• Number of pins: 2
• Connector Shape: oval
• Manufacturer: METZGER

• Number of connectors: 2
• Weight [kg]: 0.06
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: 1AZ-FSE
• Manufacturer Restriction: DENSO
• Country Specific Design: Japan
• Manufacturer: FACET

• Engine Code: 1AZ-FSE
• Required quantity: 1
• Country Specific Design: Japan
• Name: ANDUR, VŽNTVOLL
• Manufacturer: EPS

• Required quantity: 1
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Manufacturer: VALEO

• Required quantity: 1
• Supplementary Article/Supplementary Info: without suction pipe
• Number of pins: 5
• Quality class: PJ
• Name: Air flow sensor

• Number of pins: 5
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Oxygen Sensor: Switching-type Oxygen Sensor
• Voltage [V]: 12
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 13
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV913

• Number of connectors: 2
• Weight [kg]: 0.06
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 1
• Number of pins: 2
• Country Specific Design: Japan
• not for country specific design: Japan
• Weight [g]: 33
• Gross Weight [g]: 60
• Manufacturer: DENSO
• Name: DN DCPS0116

• Oxygen Sensor: Regulating Sensor, Finger-type Sensor
• Fitting Position: Rear, Front, before catalytic converter
• Block Separation:
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Oxygen Sensor: Regulating Sensor, Diagnostic Probe
• Number of pins: 4
• Cable Length [mm]: 720
• for OE number: 8946533340
• Manufacturer: MEAT&DORIA

• Number of connectors: 3
• Weight [kg]: 0.03
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Line insulation design: with silicone-coated woven-fibre insulation
• Socket colour: grey
• for OE number: 89465 30430
• Length [mm]: 800
• Thread Size: M18 x 1,5
• Supplementary Article/Info 2: with fastening material
• Connector Shape: angular
• Number of circuits: 4
• Cable Length [mm]: 800
• Number of pins: 4
• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fitting Position: after catalytic converter
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Left, Right
• Exhaust System: for pre-catalytic converter
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Quality: OE
• Weight [g]: 103
• Gross Weight [g]: 147
• Manufacturer: DENSO
• Name: DN DOX-0109
• Lisainfo: DOX-0109 DENSO
• Additional information: DOX-0109 DENSO

Oxygen Sensor: Regulating Sensor, Heated, Finger-type Sensor, Switching-type Oxygen Sensor

• Alternatively:
• Number of pins: 2
• Alternative Repair Kit: 550567
• Manufacturer: ERA

• Fitting Position: Left, Right, Front, before catalytic converter
• Oxygen Sensor: Regulating Sensor, Planar Sensor, Heated
• Quantity: 2
• Cable Length [mm]: 492
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Oxygen Sensor: Diagnostic Probe
• Fitting Position: Left Front, Right Front
• Quantity: 2
• Length [mm]: 865
• Number of connectors: 4
• Manufacturer: VERNET

• Oxygen Sensor: Regulating Sensor, Switching-type Oxygen Sensor
• Engine Code: 1AZ-FSE
• Voltage [V]: 12
• Length [mm]: 392
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.13
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV011

• Number of pins: 2
• Resistor [Ohm]: 1,100
• Housing Colour: black
• Manufacturer: METZGER

• Fitting Position: Left, Right, Front, before catalytic converter
• Oxygen Sensor: Regulating Sensor, Planar Sensor, Heated
• Quantity: 2
• Cable Length [mm]: 369
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Resistor [Ohm]: 13
• Conductor Number: 4
• Number of circuits: 4
• Length [mm]: 800
• Cable Length [mm]: 800
• Oxygen Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Number of pins: 5
• Fitting Position: Air Filter Housing
• Recommended additional repairs: Air Filter
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front, after catalytic converter
• Length [mm]: 660
• Thread Size: M18x1.5mm
• Number of pins: 4
• Oxygen Sensor: Unheated, Finger-type Sensor
• Manufacturer: KAVO PARTS

• Fitting Position: Left, Exhaust Manifold
• Line insulation design: with silicone-coated woven-fibre insulation
• Length [mm]: 570
• Number of pins: 4
• Manufacturer: VEMO GERMANY

Oxygen Sensor: Regulating Sensor, Finger-type Sensor, Thread pre-greased General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Oxygen Sensor: Heated
• Number of pins: 4
• Cable Length [mm]: 500
• Fitting Position: Exhaust Manifold
• for OE number: 8946512540
• Manufacturer: MEAT&DORIA

• Number of pins: 2
• Manufacturer: DELPHI
• Name: DE AS10172

• Oxygen Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 410
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.13
• Resistor [Ohm]: 13
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV583

• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter, Rear, Front
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Oxygen Sensor: Switching-type Oxygen Sensor
• Cable Length [mm]: 290
• Alternatively:
• Number of circuits: 4
• Alternative Repair Kit: 570112
• Manufacturer: ERA

• Operating Mode: Electric
• Voltage [V]: 12
• Manufacturer: JPN

• Height [mm]: 30
• Resistor [Ohm]: 1,100
• Number of connectors: 2
• Manufacturer: VERNET

• Oxygen Sensor: Regulating Sensor, Heated
• Fitting Position: Right, Exhaust Manifold
• Number of pins: 4
• Cable Length [mm]: 510
• for OE number: 8946520670
• Manufacturer: MEAT&DORIA

• Voltage [V]: 12
• Number of pins: 5
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.11
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 07SKV151

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Housing Type: without housing
• Name: OHUMASSIMOOTJA
• Manufacturer: BRM

• Fitting Position: Left, Exhaust Manifold
• Line insulation design: with silicone-coated woven-fibre insulation
• Length [mm]: 350
• Number of pins: 4
• Manufacturer: VEMO GERMANY

Oxygen Sensor: Regulating Sensor, Finger-type Sensor, Thread pre-greased General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Oxygen Sensor: Regulating Sensor, Switching-type Oxygen Sensor
• Exhaust System: before catalytic converter
• Voltage [V]: 12
• Guarantee: 3 years guarantee
• Weight [kg]: 0.12
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV112

• Oxygen Sensor: Regulating Sensor, Switching-type Oxygen Sensor
• Exhaust System: before catalytic converter
• Voltage [V]: 12
• Guarantee: 3 years guarantee
• Weight [kg]: 0.1
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV113
• Manufacturer: ESEN SKV

• Engine Code: 1AZ-FSE
• Construction Year from: 04.2006
• Fitting Position: Left, Right, Front, before catalytic converter
• Required quantity: 2
• Cable Length [mm]: 350
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.998.235
• Number of circuits: 4
• Name: EP 1.998.522
• Manufacturer: EPS

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Thread pre-greased

• Required quantity: 1
• Mounting Type: Bolted
• Number of pins: 5
• Manufacturer Restriction: 8ET 009 142- 901
• Supplementary Article/Supplementary Info: without suction pipe
• Assy./disassy. by qualified personnel required!:
• Name: OHUMASSIMOOTJA
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 2
• Manufacturer: FAE

• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: FAE

• Fitting Position: Left
• Exhaust System: for pre-catalytic converter
• for OE number: 89465-05100, 8946505100
• Thread Size: M18x1.5
• Cable Length [mm]: 360
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 94
• Gross Weight [g]: 127
• Manufacturer: DENSO
• Name: DN DOX-0204
• Quality class: Q

Oxygen Sensor: Regulating Sensor, Heated, Finger-type Sensor, Thread pre-greased, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
CARINA E SEDAN (/T19
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
CARINA E SEDAN (/T19
(kvaliteediklass: Q)"

• Engine Code: 1AZ-FSE
• Required quantity: 1
• Housing Type: without housing
• Name: EP 1.991.163
• Manufacturer: EPS

• for OE number: 1380084E00000
• Manufacturer: MEAT&DORIA

• Engine Code: 1AZ-FSE
• Required quantity: 1
• Housing Type: without housing
• Manufacturer: FACET

• Fitting Position: Right, before catalytic converter
• Oxygen Sensor: Regulating Sensor
• Length [mm]: 350
• Number of circuits: 4
• Manufacturer: VDO

• Fitting Position: Right
• Exhaust System: for pre-catalytic converter
• for OE number: 89465-05110, 8946505110
• Thread Size: M18x1.5
• Cable Length [mm]: 420
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 93
• Gross Weight [g]: 126
• Manufacturer: DENSO
• Name: DN DOX-0238
• Quality class: Q

Oxygen Sensor: Regulating Sensor, Heated, Finger-type Sensor, Thread pre-greased, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
AVENSIS STATION WAGO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
AVENSIS STATION WAGO
(kvaliteediklass: Q)"

• Fitting Position: Right
• for OE number: 89465-05130, 8946505130
• Thread Size: M18x1.5
• Cable Length [mm]: 630
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 105
• Gross Weight [g]: 138
• Manufacturer: DENSO
• Name: DN DOX-0288
• Quality class: Q

Oxygen Sensor: Diagnostic Probe, Heated, Finger-type Sensor, Thread pre-greased, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
AVENSIS (T25), 04.03
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
AVENSIS (T25), 04.03
(kvaliteediklass: Q)"

• Fitting Position: Left
• for OE number: 89465-05120, 8946505120
• Thread Size: M18x1.5
• Cable Length [mm]: 655
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 107
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0287
• Quality class: Q

Oxygen Sensor: Diagnostic Probe, Heated, Finger-type Sensor, Thread pre-greased, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
AVENSIS SEDAN (T25),
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
AVENSIS SEDAN (T25),
(kvaliteediklass: Q)"

• Housing Type: without housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Name: OHUMASSIMOOTJA
• Manufacturer: DLP

• Oxygen Sensor: Heated
• Manufacturer: MAGNETI MARELLI

• Operating Mode: Electric
• Manufacturer: MAGNETI MARELLI

• Number of pins: 5
• for OE number: 22204-22010
• Quality: OE
• Operating Mode: Electric
• Gross Weight [g]: 79
• alternative item: -
• Manufacturer: DENSO
• Name: DN DMA-0108

Additional information: "Tootja: DENSO
FORTUNER SAMOCHÓD TE
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
FORTUNER SAMOCHÓD TE
(kvaliteediklass: Q)"

• Resistor Type: Hot-wire Sensor
• Number of connectors: 5
• Colour: black
• Material: Plastic
• Supplementary Article/Supplementary Info: with gasket/seal
• Weight [kg]: 0.051
• Housing Type: without housing
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 2220422010
• Manufacturer: MEAT & DORIA

• Fitting Position: Right, Exhaust Manifold
• Oxygen Sensor: Heated
• Number of pins: 4
• Cable Length [mm]: 410
• Quality: OE EQUIVALENT
• for OE number: 8946728010
• Manufacturer: MEAT&DORIA