• Fitting Position: Front Axle
• Number of Teeth: 48
• Width [mm]: 9
• Inner Diameter [mm]: 70
• Outer Diameter [mm]: 80
• Fabrication Number: NZA-TY-002

• Fitting Position: Front Axle both sides
• Inner Diameter [mm]: 70
• Outer Diameter [mm]: 80
• Width [mm]: 8.8
• Number of Teeth: 48
• Name: ANDUR,ABS
• Manufacturer: MAX
• Lisainfo: 27-0352
• Additional information: 27-0352

• Fitting Position: Front Axle both sides
• Number of Teeth: 48
• Inner Diameter [mm]: 70
• Outer Diameter [mm]: 80
• Thickness [mm]: 8.8
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle both sides
• Width [mm]: 8.8
• Number of Teeth, ABS ring: 48
• Inner Diameter [mm]: 70
• Outer Diameter [mm]: 80
• Weight [kg]: 0.063
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle Right
• Fabrication Number: HCA-TY-016
• paired article number: HCA-TY-015
• Manufacturer: NTY

• Fitting Position: Front Axle Left
• Fabrication Number: HCA-TY-015
• paired article number: HCA-TY-016
• Manufacturer: NTY

• paired article number: HCA-TY-017
• Fitting Position: Rear Axle Right
• Fabrication Number: HCA-TY-018

• Fitting Position: Front Axle Left
• Sensor Type: Passive sensor
• Number of pins: 2
• Cable Length [mm]: 940
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• paired article number: HCA-TY-018
• Fitting Position: Rear Axle Left
• Fabrication Number: HCA-TY-017

• Fitting Position: Front Axle both sides
• Inner Diameter [mm]: 70
• Width [mm]: 8.8
• Outer Diameter [mm]: 80
• Number of Teeth, ABS ring: 48
• Name: ANDUR,ABS
• Manufacturer: TRI
• Lisainfo: TOYOTA
• Additional information: TOYOTA

• Fitting Position: Front Axle both sides, Front Axle
• Number of Teeth: 48
• Outer Diameter [mm]: 80
• Inner Diameter [mm]: 70
• Width [mm]: 8.8
• Manufacturer: METZGER

• Number of pins: 2
• Cable Length [mm]: 939
• Sensor Type: Passive sensor
• Fitting Position: Front Axle Left
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0124

• Number of pins: 2
• Cable Length [mm]: 940
• Sensor Type: Passive sensor
• Fitting Position: Front Axle Right
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0123

• Fitting Position: Front Axle Left
• Fabrication Number: HCA-TY-041
• paired article number: HCA-TY-042
• Manufacturer: NTY

• Fitting Position: Front Axle Left
• Specification: DENSO system
• Manufacturer: JAPKO

• Fitting Position: Rear Axle
• for OE number: 8954402010
• Number of pins: 2
• Manufacturer: MAGNETI MARELLI
• Name: MM MWSS140

• Fitting Position: Rear Axle, Rear Axle Right
• paired article number: GH-714517V
• Name: GH 714517H
• Manufacturer: AUTO-GH

• Number of pins: 2
• Cable Length [mm]: 1,030
• Sensor Type: Passive sensor
• Fitting Position: Front Axle Right
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0083

• Vehicle Identification Number (VIN) from: JT#####
• Construction Year to: 05.2004
• Vehicle Production Country: Japan
• Fitting Position: Front Axle Right
• Sensor Type: Passive sensor
• Length [mm]: 940
• Socket colour: white

• Vehicle Identification Number (VIN) from: JT#####
• Construction Year to: 05.2004
• Vehicle Production Country: Japan
• Fitting Position: Front Axle Left
• Sensor Type: Passive sensor
• Length [mm]: 980
• Socket colour: white

• Number of pins: 2
• Sensor Type: Passive sensor
• Cable Length [mm]: 960
• Fitting Position: Front Axle Left
• Name: SE DS0198
• Manufacturer: AUTOFREN SEINSA

• Fitting Position: Front Axle Right
• Fabrication Number: HCA-TY-042
• paired article number: HCA-TY-041
• Manufacturer: NTY

• Fitting Position: Front Axle Left
• Sensor Type: Inductive Sensor
• Length [mm]: 960
• Number of pins: 2
• Manufacturer Restriction: Bosch
• Manufacturer: JP GROUP
• Lisainfo: Sensor, wheel speed
• Additional information: Sensor, wheel speed

• Vehicle Production Country: Great Britain
• Fitting Position: Front Axle Right
• Sensor Type: Inductive Sensor
• Length [mm]: 1,000
• Number of pins: 2
• Manufacturer Restriction: Bosch
• Manufacturer: JP GROUP
• Lisainfo: Sensor, wheel speed
• Additional information: Sensor, wheel speed

• Fitting Position: Front Axle Right
• Fabrication Number: HCA-KA-304
• paired article number: HCA-KA-305

• Fitting Position: Front Axle Right
• Specification: DENSO system
• Manufacturer: ASHIKA

• Fitting Position: Front Axle Right
• Vehicle Identification Number (VIN) from: JT#####
• Vehicle Production Country: Japan
• Construction Year to: 05.2004
• Overall Length [mm]: 1,020
• Length [mm]: 21
• Sensor Type: Passive sensor
• Socket colour: white
• Cable Length [mm]: 940
• paired article number: 31033
• Weight [kg]: 0.12
• Manufacturer: A.B.S.

• Fitting Position: Front Axle Left
• Vehicle Identification Number (VIN) from: JT#####
• Vehicle Production Country: Japan
• Construction Year to: 05.2004
• Overall Length [mm]: 1,060
• Length [mm]: 21
• Sensor Type: Passive sensor
• Socket colour: white
• Cable Length [mm]: 980
• paired article number: 31034
• Weight [kg]: 0.18
• Manufacturer: A.B.S.

• Fitting Position: Front Axle Right
• Specification: DENSO system
• Manufacturer: JAPKO

• Construction Year to: 09.2006
• Fitting Position: Front Axle Left
• Guarantee: 5 years guarantee
• Manufacturer: HUCO

• Fitting Position: Front Axle Right
• Required quantity: 1
• Cable Length [mm]: 970
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Supplementary Article/Supplementary Info: with holder
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU358218031

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Front Axle Left
• Required quantity: 1
• Cable Length [mm]: 980
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Supplementary Article/Supplementary Info: with holder
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU358218041

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Required quantity: 2
• Fitting Position: Rear Axle
• Supplementary Article/Info 2: without cable
• Colour: black
• Manufacturer: BREMI

• Fitting Position: Front Axle Left
• Manufacturer Restriction: Denso
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 995
• Manufacturer: DELPHI
• Name: DE SS20265

• Fitting Position: Rear Axle
• Vehicle Identification Number (VIN) from: JT#####
• Vehicle Production Country: Great Britain
• Overall Length [mm]: 40
• Length [mm]: 10
• Sensor Type: Active sensor
• Socket colour: black
• paired article number: 31509
• Weight [kg]: 0.16
• Manufacturer: A.B.S.

• Fitting Position: Front Axle Right
• Manufacturer Restriction: Denso
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 965
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: DLP

• Fitting Position: Front Axle, Front Axle Left
• Manufacturer Restriction: Bosch
• Sensor Type: Passive sensor
• Cable Length [mm]: 1,060
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• Fitting Position: Front Axle, Front Axle Right
• Manufacturer Restriction: Bosch
• Sensor Type: Passive sensor
• Cable Length [mm]: 1,080
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Length [mm]: 9
• Sensor Type: Passive sensor
• Manufacturer: KAVO

• Fitting Position: Front Axle Left
• Vehicle Identification Number (VIN) from: SB#####
• Vehicle Production Country: Great Britain
• Overall Length [mm]: 1,060
• Length [mm]: 21
• Sensor Type: Passive sensor
• Socket colour: white
• Cable Length [mm]: 980
• paired article number: 30548
• Weight [kg]: 0.23
• Manufacturer: A.B.S.

• Fitting Position: Front Axle Right
• Vehicle Identification Number (VIN) from: SB#####
• Vehicle Production Country: Great Britain
• Overall Length [mm]: 1,060
• Length [mm]: 21
• Sensor Type: Passive sensor
• Socket colour: white
• Cable Length [mm]: 980
• paired article number: 30766
• Weight [kg]: 0.18
• Manufacturer: A.B.S.

• Fitting Position: Front Axle Right
• Specification: DENSO system
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: JPA

• Vehicle Identification Number (VIN): NMT, SB1
• Manufacturer Restriction: Bosch
• paired article number: ADT37136
• Number of connectors: 2
• Fitting Position: Front Axle Right
• Weight [kg]: 0.077
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN): NMT, SB1
• Manufacturer Restriction: Bosch
• paired article number: ADT37137
• Number of connectors: 2
• Fitting Position: Front Axle Left
• Weight [kg]: 0.076
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 10.2002
• Vehicle Production Country: Japan
• Fitting Position: Rear Axle
• Sensor Type: Active sensor
• Manufacturer: OPTIMAL ZAWIESZENIE

• Fitting Position: Front Axle Right
• Manufacturer Restriction: Bosch
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 1,080
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: DLP
• Quality class: PJ

• Fitting Position: Front Axle Left
• Manufacturer Restriction: Bosch
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 1,060
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: DLP
• Quality class: PJ

• Fitting Position: Front Axle Right
• Cable Length [mm]: 950
• Number of pins: 2
• paired article number: 560684A
• Manufacturer: ERA

• Fitting Position: Front Axle Right
• Number of pins: 2
• Cable Length [mm]: 1,011
• Sensor Type: Inductive Sensor
• Manufacturer: FAE

• Fitting Position: Front Axle Right
• Required quantity: 1
• Manufacturer Restriction: BOSCH
• Cable Length [mm]: 1,030
• Fitting Depth [mm]: 20.5
• Number of pins: 2
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Fitting Position: Front Axle Left
• Required quantity: 1
• Manufacturer Restriction: DENSO
• Cable Length [mm]: 940
• Fitting Depth [mm]: 20.9
• Number of pins: 2
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Fitting Position: Front Axle Left
• Required quantity: 1
• Manufacturer Restriction: BOSCH
• Cable Length [mm]: 1,010
• Fitting Depth [mm]: 20.5
• Number of pins: 2
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Number of connectors: 2
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.156
• for OE number: 89544-32030
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Manufacturer Restriction: BOSCH
• Required quantity: 1
• Fitting Position: Front Axle Right
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Manufacturer Restriction: DENSO
• Required quantity: 1
• Fitting Position: Front Axle Right
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Manufacturer Restriction: BOSCH
• Required quantity: 1
• Fitting Position: Front Axle Left
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Manufacturer Restriction: DENSO
• Required quantity: 1
• Fitting Position: Front Axle Left
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Fitting Position: Rear Axle
• Required quantity: 2
• Fitting Depth [mm]: 9.2
• Number of pins: 2
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Vehicle Identification Number (VIN): JT, NMT, SB1
• Block Separation:
• Manufacturer Restriction: Denso
• paired article number: ADT37126
• Fitting Position: Front Axle Left
• Weight [kg]: 0.2
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left
• Specification: DENSO system
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: JPA

• Number of pins: 2
• Supplementary Article/Info 2: without cable
• for OE number: 89544 02010
• Fitting Position: Rear Axle Right, Rear Axle Left
• Manufacturer: MEAT&DORIA

• Vehicle Production Country: Japan
• Fitting Position: Right Rear
• Number of pins: 2
• paired article number: 2324088
• Manufacturer: METZGER

• Vehicle Production Country: Japan
• Fitting Position: Left Rear
• Number of pins: 2
• paired article number: 2324089
• Manufacturer: METZGER