• Fitting Position: Front
• Transmission Type: Automatic Transmission
• Exhaust System: for pre-catalytic converter
• for OE number: 89467-33050, 8946720020
• Thread Size: M18x1.5
• Cable Length [mm]: 330
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 87
• Gross Weight [g]: 120
• Manufacturer: DENSO

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased Additional information: "Tootja: DENSO
CAMRY (/XV3/), 08.01
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
CAMRY (/XV3/), 08.01
(kvaliteediklass: Q)"

Manufacturer: MAGNETI MARELLI

• Manufacturer: MAGNETI MARELLI
• Name: MM SPA117

• Number of pins: 2
• Connector Shape: oval
• Socket colour: green
• Thread Size: M12x1,5
• Sensor Type: NTC Sensor
• Spanner Size: 19 mm
• for OE number: 8942220010
• Manufacturer: MEAT&DORIA

• Engine Code: 1MZ-FE
• Technical Information Number: MARKING8942233020
• Thread Size: M12x1,5
• Spanner Size: 19
• Corresponds to the original part in colour: green
• for article number: 1.880.606, 1.880.732, 1.880.733
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Engine Code: 1MZ-FE
• Technical Information Number: MARKING8942233020
• Thread Size: M12x1,5
• Spanner Size: 19
• Corresponds to the original part in colour: green
• for article number: 7.8606, 7.8732, 7.8733
• Manufacturer: FACET

• Engine Code: 1MZ-FE
• Housing Colour: green
• Thread Size: M12x1,5
• Spanner Size: 19
• for article number: 1.880.113, 1.880.114, 1.880.149, 1.880.151
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Engine Code: 1MZ-FE
• Housing Colour: green
• Thread Size: M12x1,5
• Spanner Size: 19
• for article number: 7.8113, 7.8114, 7.8149, 7.8151
• Manufacturer: FACET

• Housing Colour: green
• Number of pins: 2
• Thread Size: M 12x1,5
• Manufacturer: FAE

Manufacturer: MAGNETI MARELLI

• Number of pins: 2
• Connector Shape: oval
• Socket colour: white
• Thread Size: M 12x1,5
• Sensor Type: NTC Sensor
• Spanner Size: 19 mm
• for OE number: 1920KP
• Manufacturer: MEAT&DORIA

• Number of pins: 2
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for OE number: M883794
• Sensor Type: Active sensor
• Manufacturer: KAMOKA

• Construction Year to: 08.2006
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV253
• Manufacturer: ESEN SKV

• Height [mm]: 28
• Resistor [Ohm]: 2,100
• Number of connectors: 2
• Manufacturer: VERNET

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Oxygen Sensor: Switching-type Oxygen Sensor, Heated
• Thread Size: M18x1,5
• Cable Length [mm]: 315
• Number of circuits: 4
• Number of pins: 4
• Spanner Size: 22
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Oxygen Sensor: Heated, Planar Sensor
• Thread Size: M18x1,5
• Cable Length [mm]: 350
• Number of circuits: 4
• Number of pins: 4
• Spanner Size: 22
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Engine Code: 1MZ-FE
• Alternatively:
• Rotation Direction: Clockwise rotation
• Number of pins: 3
• Alternative Repair Kit: 550443
• Manufacturer: ERA

• Number of connectors: 2
• Weight [kg]: 0.061
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Regulating Sensor, Thread pre-greased
• Fabrication Number: ESL-TY-017
• Manufacturer: NTY

Fitting Position: Left Front, Right Front, before catalytic converter

• Length [mm]: 55.1
• Number of connectors: 2
• Weight [kg]: 0.03
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Ühenduste arv: 2
• Manufacturer: JPN

Manufacturer: MAGNETI MARELLI

• Oxygen Sensor: Regulating Sensor
• Number of circuits: 4
• Manufacturer: KAMOKA

• Oxygen Sensor: Diagnostic Probe
• Cable Length [mm]: 900
• Manufacturer: NTY

• Housing Type: without housing
• Fabrication Number: EPP-TY-000
• Manufacturer: NTY

• Supplementary Article/Supplementary Info: without suction pipe
• Number of pins: 5
• Quality class: PJ
• Name: Air flow sensor

• Number of pins: 5
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,09
• Takistus [oom]: 13
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV913

• Construction Year to: 01.2006
• Oxygen Sensor: Diagnostic Probe, Finger-type Sensor
• Fitting Position: after catalytic converter, Front
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Fitting Position: Left
• Transmission Type: Automatic Transmission
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Quality: OE
• Weight [g]: 103
• Gross Weight [g]: 147
• Manufacturer: DENSO
• Name: DN DOX-0109
• Quality class: Q

Oxygen Sensor: Diagnostic Probe, Heated, Finger-type Sensor, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
GALANT IV SEDAN (E3/
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
GALANT IV SEDAN (E3/
(kvaliteediklass: Q)"

• Oxygen Sensor: Diagnostic Probe
• Engine Code: 1MZ-FE
• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Pikkus (mm): 310
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,09
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV023

• Oxygen Sensor: Regulating Sensor, Thread pre-greased
• Fabrication Number: ESL-TY-028
• Manufacturer: NTY

• Transmission Type: Automatic Transmission
• Fitting Position: after catalytic converter
• Cable Length [mm]: 369
• Oxygen Sensor: Planar Sensor, Heated
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Transmission Type: Automatic Transmission
• Exhaust System: for pre-catalytic converter
• Cable Length [mm]: 492
• Oxygen Sensor: Planar Sensor, Heated
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Construction Year to: 12.2005
• Fitting Position: after catalytic converter
• Cable Length [mm]: 235
• Oxygen Sensor: Planar Sensor, Heated
• Manufacturer: DELPHI
• Name: DE ES20326-12B1

• Number of pins: 5
• Fitting Position: Air Filter Housing
• Recommended additional repairs: Air Filter
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Oxygen Sensor: Diagnostic Probe
• Engine Code: 1MZ-FE
• Pinge [V]: 12
• Pikkus (mm): 390
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,13
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV058

• Lambda andur: Diagnoosisond
• Pinge [V]: 12
• Pikkus (mm): 410
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,13
• Takistus [oom]: 13
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV583

• Voltage [V]: 12
• Number of pins: 5
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.07
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 07SKV103

• Oxygen Sensor: Heated
• Number of pins: 4
• Cable Length [mm]: 500
• Fitting Position: Exhaust Manifold
• for OE number: 8946512540
• Manufacturer: MEAT & DORIA

• Construction Year to: 02.2006
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter, Front
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Operating Mode: Electric
• Voltage [V]: 12
• Manufacturer: JPN

• Lambda andur: Bistabiilne andur
• Kaablipikkus (mm): 290
• valikuliselt:
• Ülekandeliinide arv: 4
• alternatiivne remondikomplekt: 570112
• Manufacturer: ERA

• Number of pins: 2
• Manufacturer: FAE

• Transmission Type: Automatic Transmission
• Oxygen Sensor: Diagnostic Probe, Heated
• Fitting Position: Left
• Number of pins: 4
• Cable Length [mm]: 510
• for OE number: 8946520670
• Manufacturer: MEAT&DORIA

• Voltage [V]: 12
• Number of pins: 5
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.11
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 07SKV151

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Housing Type: without housing
• Name: OHUMASSIMOOTJA
• Manufacturer: BRM

• Construction Year to: 01.2006
• Voltage [V]: 12
• Number of pins: 5
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.11
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Housing Type: without housing
• Number of pins: 5
• Name: PRZEPYWOMIERZ POWIETRZA LEXYS GS 300 00-
• Manufacturer: VDO

• Oxygen Sensor: Regulating Sensor, Heated
• Number of circuits: 4
• Length [mm]: 510
• Conductor Number: 4
• Resistor [Ohm]: 2.1
• Cable Length [mm]: 510
• Manufacturer: MAGNETI MARELLI
• Name: MM OSM284

• Oxygen Sensor: Regulating Sensor
• Fitting Position: Front
• Exhaust System: for pre-catalytic converter
• for OE number: 89467-33050
• Transmission Type: Automatic Transmission
• Pikkus (mm): 400
• Pistikkontaktide arv: 4
• Manufacturer: FAE ELEKTRYKA

• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Garantii: 3 aastat garantii
• Kaal (kg): 0,12
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV112

• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Garantii: 3 aastat garantii
• Kaal (kg): 0,1
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 09SKV113
• Manufacturer: ESEN SKV

• Mounting Type: Bolted
• Number of pins: 5
• Manufacturer Restriction: 8ET 009 142- 901
• Supplementary Article/Supplementary Info: without suction pipe
• Assy./disassy. by qualified personnel required!:
• Name: OHUMASSIMOOTJA
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: 1MZ-FE
• Fitting Position: Left Front, after catalytic converter
• Cable Length [mm]: 300
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.998.235
• Number of circuits: 4
• Name: LAMBDA ANDUR
• Manufacturer: EPS

Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased

• Engine Code: 1MZ-FE
• Housing Type: without housing
• Name: EP 1.991.163
• Manufacturer: EPS

• for OE number: 1380084E00000
• Manufacturer: MEAT&DORIA

• Engine Code: 1MZ-FE
• Housing Type: without housing
• Manufacturer: FACET

• Construction Year to: 01.2006
• Transmission Type: Automatic Transmission
• Fitting Position: Right, after catalytic converter
• Oxygen Sensor: Diagnostic Probe
• Length [mm]: 350
• Number of circuits: 4
• Manufacturer: VDO

• Required quantity: 1
• Number of pins: 2
• Country Specific Design: Japan
• not for country specific design: Japan
• Weight [g]: 41
• Gross Weight [g]: 68
• Manufacturer: DENSO

• Construction Year from: 01.2006
• Fitting Position: Front, Rear
• Oxygen Sensor: Regulating Sensor, Heated
• Block Separation:
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 350
• Weight [kg]: 0.08
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Left
• Transmission Type: Automatic Transmission
• for OE number: 89465-33260, 8946505110
• Thread Size: M18x1.5
• Cable Length [mm]: 420
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 93
• Gross Weight [g]: 126
• Manufacturer: DENSO
• Name: DN DOX-0238
• Quality class: Q

Oxygen Sensor: Diagnostic Probe, Heated, Finger-type Sensor, Thread pre-greased, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
AVENSIS STATION WAGO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
AVENSIS STATION WAGO
(kvaliteediklass: Q)"

• Fitting Position: Right
• Transmission Type: Automatic Transmission
• for OE number: 89465-33250, 8946533250
• Thread Size: M18x1.5
• Cable Length [mm]: 230
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 80
• Gross Weight [g]: 113
• Manufacturer: DENSO
• Name: DN DOX-0237
• Quality class: Q

Oxygen Sensor: Diagnostic Probe, Heated, Finger-type Sensor, Thread pre-greased, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
CAMRY (/XV3/), 08.01
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
CAMRY (/XV3/), 08.01
(kvaliteediklass: Q)"

• Oxygen Sensor: Switching-type Oxygen Sensor
• Cable Length [mm]: 500
• Number of pins: 4
• Manufacturer: ERA

• Oxygen Sensor: Regulating Sensor
• Fitting Position: Rear
• Exhaust System: for pre-catalytic converter
• for OE number: 89467-33060
• Transmission Type: Automatic Transmission
• Pikkus (mm): 300
• Pistikkontaktide arv: 4
• Manufacturer: FAE ELEKTRYKA

• Housing Type: without housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Name: OHUMASSIMOOTJA
• Manufacturer: DLP

• Operating Mode: Electric
• Manufacturer: MAGNETI MARELLI

• Construction Year to: 01.2006
• Number of pins: 5
• for OE number: 22204-22010
• Quality: OE
• Operating Mode: Electric
• Gross Weight [g]: 79
• alternative item: -
• Manufacturer: DENSO
• Name: DN DMA-0108

Additional information: "Tootja: DENSO
FORTUNER SAMOCHÓD TE
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
FORTUNER SAMOCHÓD TE
(kvaliteediklass: Q)"

• Fitting Position: Rear
• Transmission Type: Automatic Transmission
• Exhaust System: for pre-catalytic converter
• for OE number: 89467-33060, 89467-48050
• Thread Size: M18x1.5
• Cable Length [mm]: 300
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 91
• Gross Weight [g]: 124
• Manufacturer: DENSO
• Name: DN DOX-0501

Oxygen Sensor: Regulating Sensor, Heated, Finger-type Sensor, Broadband Oxygen Sensor, Thread pre-greased

• Resistor Type: Hot-wire Sensor
• Number of connectors: 5
• Colour: black
• Material: Plastic
• Supplementary Article/Supplementary Info: with gasket/seal
• Weight [kg]: 0.051
• Housing Type: without housing
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: 1MZ-FE
• Operating Mode: Electric
• Voltage [V]: 12
• for OE number: 22204-22010
• Name: OHUMASSIMOOTJA
• Manufacturer: PIE

• for OE number: 2220422010
• Manufacturer: MEAT & DORIA

• Transmission Type: Automatic Transmission
• Required quantity: 2
• Oxygen Sensor: Heated
• Number of pins: 4
• Cable Length [mm]: 410
• Quality: OE EQUIVALENT
• Fitting Position: Exhaust Manifold
• for OE number: 8946728010
• Manufacturer: MEAT&DORIA