• Manufacturer: JP GROUP
• Lisainfo: Sender Unit, coolant temperature
• Additional information: Sender Unit, coolant temperature

• Fitting Position: Front
• Transmission Type: Automatic Transmission
• Exhaust System: for pre-catalytic converter
• for OE number: 89467-33050, 8946720020
• Thread Size: M18x1.5
• Cable Length [mm]: 330
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 87
• Gross Weight [g]: 120
• Manufacturer: DENSO

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased Additional information: "Tootja: DENSO
CAMRY (/XV3/), 08.01
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
CAMRY (/XV3/), 08.01
(kvaliteediklass: Q)"

• Length [mm]: 60
• Spanner Size: 19
• Manufacturer: KAMOKA

Fabrication Number: ECT-TY-002

• Fabrication Number: ECT-TY-001
• Number of pins: 2
• Thread Size: M12x1,5
• Connector Shape: oval
• Socket colour: white
• Sensor Type: NTC Sensor
• Spanner Size: 19
• Supplementary Article/Info 2: with seal ring
• Name: NTY ECT-TY-001
• Manufacturer: NTY

• Engine Code: 1MZ-FE
• Manufacturer Restriction: TOKAIRIKA
• Colour: black
• Pressure [bar]: 0.2
• Thread Size: 1/8 GAS
• Spanner Size: 24
• Name: EP 1.800.114
• Manufacturer: EPS

• Engine Code: 1MZ-FE
• Manufacturer Restriction: TOKAIRIKA
• Colour: black
• Pressure [bar]: 0.2
• Thread Size: 1/8 GAS
• Spanner Size: 24
• Manufacturer: FACET

• Väliskeere [mm]: 3/8-GAS
• Võtmekaugus: 19 MM
• Manufacturer: JPN

• Spanner Size: 24
• Number of connectors: 1
• Shifting Points [bar]: 0.2
• Weight [kg]: 0.04
• Manufacturer: BLUE PRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 01.2006, 02.2006
• Manufacturer Restriction: NIPPONDENSO
• Block Separation:
• Manufacturer: BOSCH

• Thread Size: 1/8x28 BSP
• Pressure [bar]: 0.2
• Manufacturer: FAE

• Pressure [bar]: 2
• Housing Colour: grey
• Thread Size: R1/8
• Diameter [mm]: 24
• Spanner Size: 24
• Number of pins: 1
• Name: DE SW90001
• Manufacturer: DELPHI

• Piirangutega toode/piirangu info 2: koos pistikuga
• Juhtmete arv (paranduskomplekt, kaablikomplekt): 2
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Pressure [bar]: 0.2
• Thread Size: 1/8 GAS
• Number of pins: 1
• Technical Information Number: circuit N.C.
• Manufacturer: ERA

• Anduritüüp: NTC-andur
• Montaaživiis: kruvitud
• Pistikukatte kuju: ovaalne
• Pistikkontaktide arv: 1
• Pistiku värv: must
• Võtmekaugus: 12
• Keermemõõt: 1/8
• OE-numbri jaoks: 94854974
• Manufacturer: NRF

• Anduritüüp: NTC-andur
• Montaaživiis: kruvitud
• Pistikukatte kuju: ristkülik
• Pistikkontaktide arv: 2
• Võtmekaugus: 19
• Keermemõõt: M12x1.5
• OE-numbri jaoks: 195321101000
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Manufacturer: NRF

• Anduritüüp: NTC-andur
• Montaaživiis: kruvitud
• Pistikukatte kuju: ristkülik
• Pistikkontaktide arv: 2
• Pistiku värv: valge
• Võtmekaugus: 19
• Keermemõõt: M12x1.5
• OE-numbri jaoks: 1920KP
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Manufacturer: NRF

• Voltage [V]: 12
• Pressure [bar]: 0.2
• Combi Switch Function: Normally Closed Contact
• Thread Size: 1/8 GAS
• Colour: black
• Spanner Size: 24
• Number of pins: 1
• Assy./disassy. by qualified personnel required!:
• Name: HE 6ZL003259511
• Manufacturer: HELLA

• Pistikukatte kuju: ovaalne
• Materjal: Plastik
• Pistikkontaktide arv: 2
• Pistikute teostus: Female
• Anduritüüp: NTC-andur
• Võtmekaugus: S19
• Keermemõõt: M12*1,5
• Name: NI 207056
• Manufacturer: NISSENS

• Spanner Size: 19 mm
• Sensor Type: NTC Sensor
• Number of pins: 2
• Connecting thread: M12 x 1,5
• Manufacturer: ERA

• Engine Code: 1MZ-FE
• Technical Information Number: MARKING8942233020
• Thread Size: M12x1,5
• Spanner Size: 19
• Corresponds to the original part in colour: green
• for article number: 1.880.606, 1.880.732, 1.880.733
• Name: EP 1.830.177
• Manufacturer: EPS

• Pistikukatte kuju: ristkülik
• Materjal: Plastik
• Pistikkontaktide arv: 2
• Pistikute teostus: Female
• Anduritüüp: NTC-andur
• Võtmekaugus: S19
• Keermemõõt: M12*1,5
• Name: NI 207076
• Manufacturer: NISSENS

Tehniline informatsioon: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Engine Code: 1MZ-FE
• Technical Information Number: MARKING8942233020
• Thread Size: M12x1,5
• Spanner Size: 19
• Corresponds to the original part in colour: green
• for article number: 7.8606, 7.8732, 7.8733
• Manufacturer: FACET

• Length [mm]: 60
• External Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of connectors: 2
• Colour: green
• Weight [kg]: 0.06
• Supplementary Article/Info 2: with seal ring
• Manufacturer: BLUE PRINT ELEKTRYKA

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: 1MZ-FE
• Housing Colour: green
• Thread Size: M12x1,5
• Spanner Size: 19
• for article number: 1.880.113, 1.880.114, 1.880.149, 1.880.151
• Name: EP 1.830.128
• Manufacturer: EPS

• Length [mm]: 60
• External Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of connectors: 2
• Colour: green
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Name: SW 40 93 4672
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: 1MZ-FE
• Housing Colour: green
• Thread Size: M12x1,5
• Spanner Size: 19
• for article number: 7.8113, 7.8114, 7.8149, 7.8151
• Manufacturer: FACET

• Housing Colour: blue
• Number of pins: 2
• Thread Size: M12X1.5-6g
• Spanner Size: 19
• Manufacturer: DELPHI
• Name: DE TS10250

• Mounting Type: Bolted
• Voltage [V]: 12
• Resistor [Ohm]: 2,080, 280
• Supplementary Article/Supplementary Info: with gasket/seal
• Temperature range from [°C]: 25
• Temperature range to [°C]: +80
• Thread Size: M12x1,5
• Colour: green
• Sensor Type: NTC Sensor
• Number of pins: 2
• Colour Coding: grey
• Corresponds to the original part in colour: green
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT009107481

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: 1MZ-FE
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Housing Colour: green
• Supplementary Article/Supplementary Info: with gasket/seal
• Thread Size: M12x1,5
• Manufacturer: VIEROL

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Length [mm]: 60
• External Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of connectors: 2
• Colour: green
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 2
• Supplementary Article/Supplementary Info: with gasket/seal
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Colour: green
• Number of pins: 2
• Supplementary Article/Supplementary Info: with gasket/seal
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Number of pins: 2
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: 1MZ-FE
• Sensor Type: NTC Sensor
• Thread Size: M12x1,5
• Spanner Size: 19
• Supplementary Article/Info 2: with seal ring
• Colour: green
• Number of pins: 2
• Manufacturer: MEYLE

• Thread Size: M12 x 1,5
• Number of pins: 2
• Manufacturer: ERA

• for OE number: M883794
• Sensor Type: Active sensor
• Manufacturer: KAMOKA

• Number of pins: 2
• Sensor Type: Inductive Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Required quantity: 1
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Construction Year to: 08.2006
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV253
• Manufacturer: ESEN SKV

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Name: NTY ESL-SK-000
• Manufacturer: NTY

• Oxygen Sensor: Switching-type Oxygen Sensor, Heated
• Thread Size: M18x1,5
• Cable Length [mm]: 315
• Number of circuits: 4
• Number of pins: 4
• Spanner Size: 22
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Oxygen Sensor: Heated, Planar Sensor
• Thread Size: M18x1,5
• Cable Length [mm]: 350
• Number of circuits: 4
• Number of pins: 4
• Spanner Size: 22
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Engine Code: 1MZ-FE
• Alternatively:
• Rotation Direction: Clockwise rotation
• Number of pins: 3
• Alternative Repair Kit: 550443
• Manufacturer: ERA

• Number of connectors: 2
• Weight [kg]: 0.061
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Regulating Sensor, Thread pre-greased
• Fabrication Number: ESL-TY-017

Fitting Position: Left Front, Right Front, before catalytic converter

• Length [mm]: 55.1
• Number of connectors: 2
• Weight [kg]: 0.03
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Ühenduste arv: 2
• Manufacturer: JPN

• Sensor Type: Inductive Sensor
• Number of pins: 2
• Voltage [V]: 12
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Resistor [Ohm]: 2,065
• Name: VA 254143
• Manufacturer: VALEO

• Oxygen Sensor: Regulating Sensor
• Number of circuits: 4
• Manufacturer: KAMOKA

• Oxygen Sensor: Diagnostic Probe
• Cable Length [mm]: 900

• Housing Type: without housing
• Fabrication Number: EPP-TY-000

• Number of pins: 5
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,09
• Takistus [oom]: 13
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 09SKV913
• Manufacturer: ESEN SKV

• Fitting Position: Left
• Transmission Type: Automatic Transmission
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Quality: OE
• Weight [g]: 103
• Gross Weight [g]: 147
• Manufacturer: DENSO
• Name: DN DOX-0109

Oxygen Sensor: Diagnostic Probe, Heated, Finger-type Sensor, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
GALANT IV SEDAN (E3/
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
GALANT IV SEDAN (E3/
(kvaliteediklass: Q)"

• Oxygen Sensor: Diagnostic Probe
• Engine Code: 1MZ-FE
• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Pikkus (mm): 310
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,09
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 09SKV023
• Manufacturer: ESEN SKV

• Oxygen Sensor: Regulating Sensor, Thread pre-greased
• Fabrication Number: ESL-TY-028

• Transmission Type: Automatic Transmission
• Fitting Position: after catalytic converter
• Cable Length [mm]: 369
• Oxygen Sensor: Planar Sensor, Heated
• Manufacturer: DELPHI
• Name: DE ES20118-12B1

• Transmission Type: Automatic Transmission
• Exhaust System: for pre-catalytic converter
• Cable Length [mm]: 492
• Oxygen Sensor: Planar Sensor, Heated
• Manufacturer: DELPHI
• Name: DE ES20157-12B1

• Construction Year to: 12.2005
• Fitting Position: after catalytic converter
• Cable Length [mm]: 235
• Oxygen Sensor: Planar Sensor, Heated
• Manufacturer: DELPHI
• Name: DE ES20326-12B1

• Oxygen Sensor: Diagnostic Probe
• Engine Code: 1MZ-FE
• Pinge [V]: 12
• Pikkus (mm): 390
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,13
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 09SKV058
• Manufacturer: ESEN SKV

• Lambda andur: Diagnoosisond
• Pinge [V]: 12
• Pikkus (mm): 410
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,13
• Takistus [oom]: 13
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 09SKV583
• Manufacturer: ESEN SKV

• Voltage [V]: 12
• Number of pins: 5
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.07
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 07SKV103
• Manufacturer: ESEN SKV

• Engine Code: 1MZ-FE
• Manufacturer: FACET

• Construction Year to: 02.2006
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter, Front
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH

• Operating Mode: Electric
• Voltage [V]: 12
• Manufacturer: JPN

• Lambda andur: Bistabiilne andur
• Kaablipikkus (mm): 290
• valikuliselt:
• Ülekandeliinide arv: 4
• alternatiivne remondikomplekt: 570112
• Manufacturer: ERA

• Number of pins: 2
• Manufacturer: FAE

• Transmission Type: Automatic Transmission
• Oxygen Sensor: Diagnostic Probe, Heated
• Fitting Position: Left
• Number of pins: 4
• Cable Length [mm]: 510
• for OE number: 8946520670
• Manufacturer: MEAT&DORIA

• Voltage [V]: 12
• Number of pins: 5
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.11
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 07SKV151
• Manufacturer: ESEN SKV

• Oxygen Sensor: Regulating Sensor, Heated
• Number of circuits: 4
• Length [mm]: 510
• Conductor Number: 4
• Resistor [Ohm]: 2.1
• Cable Length [mm]: 510
• Name: MM OSM284
• Manufacturer: MAGNETI MARELLI

• Oxygen Sensor: Regulating Sensor
• Fitting Position: Front
• Exhaust System: for pre-catalytic converter
• for OE number: 89467-33050
• Transmission Type: Automatic Transmission
• Pikkus (mm): 400
• Pistikkontaktide arv: 4
• Manufacturer: FAE ELEKTRYKA

• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Garantii: 3 aastat garantii
• Kaal (kg): 0,1
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 09SKV113
• Manufacturer: ESEN SKV

• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Garantii: 3 aastat garantii
• Kaal (kg): 0,12
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 09SKV112
• Manufacturer: ESEN SKV

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Housing Type: without housing
• Manufacturer: BREMI

• Engine Code: 1MZ-FE
• Fitting Position: Left Front, after catalytic converter
• Cable Length [mm]: 300
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.998.235
• Number of circuits: 4
• Name: EP 1.998.269
• Manufacturer: EPS

Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased

• Construction Year to: 01.2006
• Voltage [V]: 12
• Number of pins: 5
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.11
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV

• Engine Code: 1MZ-FE
• Housing Type: without housing
• Name: EP 1.991.163
• Manufacturer: EPS

• for OE number: 1380084E00000
• Manufacturer: MEAT&DORIA

• Engine Code: 1MZ-FE
• Housing Type: without housing
• Manufacturer: FACET

• Required quantity: 1
• Number of pins: 2
• Country Specific Design: Japan
• not for country specific design: Japan
• Weight [g]: 41
• Gross Weight [g]: 68
• Manufacturer: DENSO

• Construction Year from: 01.2006
• Fitting Position: Front, Rear
• Oxygen Sensor: Regulating Sensor, Heated
• Block Separation:
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 350
• Weight [kg]: 0.08
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Left
• Transmission Type: Automatic Transmission
• for OE number: 89465-33260, 8946505110
• Thread Size: M18x1.5
• Cable Length [mm]: 420
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 93
• Gross Weight [g]: 126
• Manufacturer: DENSO
• Name: DN DOX-0238

Oxygen Sensor: Diagnostic Probe, Heated, Finger-type Sensor, Thread pre-greased, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
AVENSIS STATION WAGO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
AVENSIS STATION WAGO
(kvaliteediklass: Q)"

• Mounting Type: Bolted
• Number of pins: 5
• Manufacturer Restriction: 8ET 009 142- 901
• Supplementary Article/Supplementary Info: without suction pipe
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Right
• Transmission Type: Automatic Transmission
• for OE number: 89465-33250, 8946533250
• Thread Size: M18x1.5
• Cable Length [mm]: 230
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 80
• Gross Weight [g]: 113
• Manufacturer: DENSO
• Name: DN DOX-0237

Oxygen Sensor: Diagnostic Probe, Heated, Finger-type Sensor, Thread pre-greased, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
CAMRY (/XV3/), 08.01
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
CAMRY (/XV3/), 08.01
(kvaliteediklass: Q)"

• Oxygen Sensor: Switching-type Oxygen Sensor
• Cable Length [mm]: 500
• Number of pins: 4
• Manufacturer: ERA

• Oxygen Sensor: Regulating Sensor
• Fitting Position: Rear
• Exhaust System: for pre-catalytic converter
• for OE number: 89467-33060
• Transmission Type: Automatic Transmission
• Pikkus (mm): 300
• Pistikkontaktide arv: 4
• Manufacturer: FAE ELEKTRYKA

• Housing Type: without housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Manufacturer: DELPHI
• Name: DE AF10135-12B1