Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
Manufacturer: MAGNETI MARELLI
-
OE-numbri jaoks: 89422-
22030 - Laius (mm): 67
- Kõrgus (mm): 68
- Pikkus (mm): 40
- Kaal (g): 38
- Garantii: 3 aastat garantii
- Pistikkontaktide arv: 3
- Rakendustüüp: elektriline
- Pinge [V]: 12
- Manufacturer: AT AUTOTEILE GERMANY
Üldine informatsioon: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.
-
Engine Code: 2KD-
FTV - Construction Year to: 05.2004
-
Manufacturer Restriction: NIPPONDENSO-
YAZAKI -
Thread Size: M16x1,
5 - Spanner Size: 17
- Corresponds to the original part in colour: black
- Name: EP 1.830.161
- Manufacturer: EPS
-
Engine Code: 2KD-
FTV - Construction Year to: 05.2004
-
Manufacturer Restriction: NIPPONDENSO-
YAZAKI -
Thread Size: M16x1,
5 - Spanner Size: 17
- Corresponds to the original part in colour: black
- Manufacturer: FACET
-
Engine Code: 2KD-
FTV - Number of pins: 2
- Supplementary Article/Info 2: with seal ring
- Housing Colour: green
-
Supplementary Article/Supplementary Info: with gasket/
seal -
Thread Size: M12x1,
5 - Weight [kg]: 0.032
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Engine Code: 2KD-
FTV - Housing Colour: green
-
Thread Size: M12x1,
5 - Spanner Size: 19
-
for article number: 1.880.113,
1.880.114, 1.880.149, 1.880.151 - Name: EP 1.830.128
- Manufacturer: EPS
-
Engine Code: 2KD-
FTV - Housing Colour: green
-
Thread Size: M12x1,
5 - Spanner Size: 19
-
for article number: 7.8113,
7.8114, 7.8149, 7.8151 - Manufacturer: FACET
- Housing Colour: green
- Number of pins: 2
-
Thread Size: M 12x1,
5 - Manufacturer: FAE
- Sensor Type: Inductive Sensor
- Number of pins: 2
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
Manufacturer: MAGNETI MARELLI
-
Fabrication Number: ECT-
TY- 005 - Manufacturer: NTY
- Thread Size: M 12x1.5
- Number of pins: 3
- Housing Colour: grey
- Manufacturer: FAE
-
Thread Size: M 16x1,
5 - Number of pins: 2
- Housing Colour: grey
- Manufacturer: FAE ELEKTRYKA
- Weight [kg]: 0.026
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Number of pins: 2
-
Thread Size: M16 x 1,
5 - Spanner Size: 22
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Height [mm]: 32.1
-
Resistor [Ohm]: 2,
200 - Number of connectors: 2
- Manufacturer: VERNET
- Number of pins: 3
-
Fabrication Number: ECM-
TY- 005 -
Name: NTY ECM-
TY- 005 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Number of pins: 3
- Spanner Size: 19
- Housing Colour: grey
- Connector Shape: triangular
- Manufacturer: METZGER
- Number of pins: 2
- Connecting thread: M16x1.5mm
- Manufacturer: ERA
- Thread Size: M16x1.5
- Manufacturer: VERNET
- Sensor Type: Hall Sensor
- Number of pins: 3
- Connector Shape: oval
- Supplementary Article/Info 2: without cable
- Weight [kg]: 0.03
- Manufacturer: VALEO
- Name: VA 366136
- Housing Type: without housing
-
Fabrication Number: EPP-
TY- 002 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Number of pins: 3
- Guarantee: 3 years guarantee
- Weight [kg]: 0.03
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
-
Engine Code: 2KD-
FTV - Name: EP 1.953.509
- Manufacturer: EPS
-
Engine Code: 2KD-
FTV -
Thread Size: M16x1,
5 - Spanner Size: 22
- Manufacturer: EPS
- Voltage [V]: 12
- Number of pins: 2
-
Thread Size: M16x1,
5 - Colour: grey
- Manufacturer: METZGER
- Number of pins: 3
- Connector Shape: oval
- Number of mounting bores: 2
- for OE number: 8942120210
- Manufacturer: MEAT & DORIA
- Number of pins: 2
-
Resistor [Ohm]: 2,
100 - Manufacturer: METZGER
Manufacturer: MAGNETI MARELLI
Manufacturer: MAGNETI MARELLI
-
Oxygen Sensor: Regulating Probe,
Diagnostic Probe - Block Separation:
- Number of circuits: 4
-
Recommended change interval [km]: 250,
000 - Connector/Clamp: Connector may need adjustment
- Manufacturer: BOSCH
Fitting Position: before catalytic converter, after catalytic converter
- Voltage [V]: 12
- Number of pins: 5
- Guarantee: 3 years guarantee
- New Part:
- Used part return not required:
- Weight [kg]: 0.11
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 07SKV105
- Quality: OE EQUIVALENT
- for OE number: 222040L010
- Manufacturer: MEAT&DORIA
-
Engine Code: 2KD-
FTV - Construction Year from: 08.2006
- Pressure from [kPA]: 28
- Pressure to [kPA]: 400
- Output Voltage, from [V]: 0.25
- Output Voltage, up to [V]: 4.498
- Name: EP 1.993.214
- Manufacturer: EPS
-
Engine Code: 2KD-
FTV - Construction Year from: 08.2006
- Pressure from [kPA]: 28
- Pressure to [kPA]: 400
- Output Voltage, from [V]: 0.25
- Output Voltage, up to [V]: 4.498
- Manufacturer: FACET
-
Engine Code: 2KD-
FTV - Housing Type: without housing
- Name: EP 1.991.163
- Manufacturer: EPS
- Construction Year from: 08.2006
- Colour: black
- Number of pins: 3
- Pressure to [kPA]: 401
- Manufacturer: FAE
-
Engine Code: 2KD-
FTV - Housing Type: without housing
- Manufacturer: FACET
- Housing Type: without housing
- Number of pins: 5
- Plug Type: Male
- Housing Colour: black
- Voltage [V]: 12
- Recommended additional repairs: Air Filter
- Manufacturer: DELPHI
-
Name: DE AF10377-
12B1
- Required quantity: 1
- Voltage [V]: 12
- Number of pins: 5
- Housing Type: without housing
- Manufacturer: BREMI
- Alternatively:
- Number of pins: 5
- Supplementary Article/Info 2: with clip
- Manufacturer: ERA
- Mounting Type: Bolted
- Number of pins: 5
- Supplementary Article/Supplementary Info: without suction pipe
- Assy./disassy. by qualified personnel required!:
- Name: HE 8ET009142921
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Weight [kg]: 0.036
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
for OE number: 22204-
30010 - Quality: OE
- Operating Mode: Electric
- Number of pins: 5
- Gross Weight [g]: 79
-
alternative item: -
- Manufacturer: DENSO
-
Name: DN DMA-
0112
Additional information: "Tootja: DENSO
INNOVA, 07.03-
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
INNOVA, 07.03-
(kvaliteediklass: Q)"
- Number of connectors: 3
- Weight [kg]: 0.01
-
for OE number: 89421-
20210 - Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Engine Code: 2KD-
FTV - Operating Mode: Electric
- Voltage [V]: 12
- Manufacturer: PIERBURG
- Number of pins: 5
- Supplementary Article/Info 2: with clip
- Manufacturer: ERA
- Sensor Type: Hall Sensor
- Mounting Type: Screw Connection
- Shape: oval
- Number of pins: 3
- Supplementary Article/Info 2: with seal ring
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks