• Manufacturer: JP GROUP
• Lisainfo: Sender Unit, coolant temperature
• Additional information: Sender Unit, coolant temperature

• Construction Year to: 08.2001
• Exhaust System: for pre-catalytic converter
• Thread Size: Flange 44
• Cable Length [mm]: 380
• Number of pins: 4
• Manufacturer Restriction: DENSO
• for OE number: 8946529715
• Quality: OE
• Weight [g]: 132
• Gross Weight [g]: 172
• Manufacturer: DENSO

Oxygen Sensor: Regulating Sensor, Heated, Finger-type Sensor, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
CELICA (/T20/), 11.9
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
CELICA (/T20/), 11.9
(kvaliteediklass: Q)"

• Engine Code: 3RZ-FE
• Manufacturer Restriction: TOKAIRIKA
• Spanner Size: 24
• Number of pins: 1
• Manufacturer: KAVO PARTS

• Fabrication Number: ECT-TY-002
• Manufacturer: NTY

• Engine Code: 3RZ-FE
• Manufacturer Restriction: TOKAIRIKA
• Colour: black
• Pressure [bar]: 0.2
• Thread Size: 1/8 GAS
• Spanner Size: 24
• Name: OLISURVELšLITUS
• Manufacturer: EPS

• Engine Code: 3RZ-FE
• Manufacturer Restriction: TOKAIRIKA
• Colour: black
• Pressure [bar]: 0.2
• Thread Size: 1/8 GAS
• Spanner Size: 24
• Manufacturer: FACET

• Engine Code: 3RZ-FE
• Number of pins: 2
• Manufacturer: KAVO PARTS

Manufacturer: BOSCH

• Switch Pressure [bar]: 0.2
• Thread Size: 1/8x28 BSPT
• Sensor Type: Closed-type Sensor
• Name: OLISURVELšLITUS
• Manufacturer: VER
• Additional information: OS3557
• Lisainfo: OS3557

• Anduritüüp: NTC-andur
• Montaaživiis: kruvitud
• Pistikukatte kuju: ovaalne
• Pistikkontaktide arv: 1
• Pistiku värv: must
• Võtmekaugus: 12
• Keermemõõt: 1/8
• OE-numbri jaoks: 94854974
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Thread Size: 1/8x28 BSP
• Pressure [bar]: 0.2
• Manufacturer: FAE

• Thread Size: M12x1.5
• Manufacturer: VERNET

• Pressure [bar]: 2
• Housing Colour: grey
• Thread Size: R1/8
• Diameter [mm]: 24
• Spanner Size: 24
• Number of pins: 1
• Name: OLISURVELšLITUS
• Manufacturer: DLP

• Fabrication Number: ECP-TY-017
• Manufacturer: NTY

• Piirangutega toode/piirangu info 2: koos pistikuga
• Juhtmete arv (paranduskomplekt, kaablikomplekt): 2
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• for OE number: 89424-87703-000
• Colour: black
• Sensor Type: NTC Sensor
• Number of pins: 2
• Connector Shape: oval
• Fabrication Number: ECT-MZ-000
• Manufacturer: NTY
• Name: NTY ECT-MZ-000

• Engine Code: 3RZ-FE
• Number of pins: 2
• Manufacturer: KAVO

• Pressure [bar]: 0.2
• Thread Size: 1/8 GAS
• Number of pins: 1
• Technical Information Number: circuit N.C.
• Manufacturer: ERA

• Anduritüüp: NTC-andur
• Montaaživiis: kruvitud
• Pistikukatte kuju: ristkülik
• Pistikkontaktide arv: 2
• Võtmekaugus: 19
• Keermemõõt: M12x1.5
• OE-numbri jaoks: 195321101000
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Engine Code: 3RZ-FE
• Thread Size: 1/8 GAS
• Spanner Size: 13
• Corresponds to the original part in colour: black
• Name: EP 1.830.184
• Manufacturer: EPS

• Anduritüüp: NTC-andur
• Montaaživiis: kruvitud
• Pistikukatte kuju: ristkülik
• Pistikkontaktide arv: 2
• Võtmekaugus: 19
• Keermemõõt: M12x1.5
• OE-numbri jaoks: J8942220010
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Manufacturer: NRF

• Engine Code: 3RZ-FE
• Thread Size: 1/8 GAS
• Spanner Size: 13
• Corresponds to the original part in colour: black
• Manufacturer: FACET

• Voltage [V]: 12
• Pressure [bar]: 0.2
• Combi Switch Function: Normally Closed Contact
• Thread Size: 1/8 GAS
• Colour: black
• Spanner Size: 24
• Number of pins: 1
• Assy./disassy. by qualified personnel required!:
• Name: HE 6ZL003259511
• Manufacturer: HELLA

• Engine Code: 3RZ-FE
• Supplementary Article/Info 2: without connector parts
• Name: Andur,sisendohu temperatuur
• Manufacturer: MAX

• Pistikukatte kuju: ovaalne
• Materjal: Plastik
• Pistikkontaktide arv: 2
• Pistikute teostus: Female
• Anduritüüp: NTC-andur
• Võtmekaugus: S19
• Keermemõõt: M12*1,5
• Name: NI 207056
• Manufacturer: NISSENS

• Spanner Size: 19 mm
• Sensor Type: NTC Sensor
• Number of pins: 2
• Connecting thread: M12 x 1,5
• Manufacturer: ERA

• Pistikukatte kuju: ristkülik
• Materjal: Plastik
• Pistikkontaktide arv: 2
• Pistikute teostus: Female
• Anduritüüp: NTC-andur
• Võtmekaugus: S19
• Keermemõõt: M12*1,5
• Name: NI 207076
• Manufacturer: NISSENS

Tehniline informatsioon: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Engine Code: 3RZ-FE
• Sensor Type: NTC Sensor
• Thread Size: M12x1,5
• Spanner Size: 19
• Colour: blue
• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Engine Code: 3RZ-FE
• Housing Colour: green
• Thread Size: M12x1,5
• Spanner Size: 19
• for article number: 1.880.113, 1.880.114, 1.880.149, 1.880.151
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Engine Code: 3RZ-FE
• Housing Colour: green
• Thread Size: M12x1,5
• Spanner Size: 19
• for article number: 7.8113, 7.8114, 7.8149, 7.8151
• Manufacturer: FACET

• Colour: blue
• Housing Colour: blue
• Number of pins: 2
• Thread Size: M12X1.5-6g
• Spanner Size: 19
• Manufacturer: DELPHI
• Name: DE TS10250

• Mounting Type: Bolted
• Voltage [V]: 12
• Resistor [Ohm]: 2,080, 280
• Supplementary Article/Supplementary Info: with gasket/seal
• Temperature range from [°C]: 25
• Temperature range to [°C]: +80
• Thread Size: M12x1,5
• Colour: green
• Sensor Type: NTC Sensor
• Number of pins: 2
• Colour Coding: grey
• Corresponds to the original part in colour: green
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT009107481

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: 3RZ-FE
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Housing Colour: green
• Supplementary Article/Supplementary Info: with gasket/seal
• Thread Size: M12x1,5
• Manufacturer: VIEROL

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 2
• Supplementary Article/Supplementary Info: with gasket/seal
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Colour: green
• Number of pins: 2
• Supplementary Article/Supplementary Info: with gasket/seal
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Number of pins: 2
• Connector Shape: oval
• Colour: black
• Sensor Type: NTC Sensor
• for OE number: BP4W18845
• Manufacturer: MEAT & DORIA

• Number of pins: 2
• Sensor Type: Inductive Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fabrication Number: ECP-TY-021
• Number of pins: 3
• Manufacturer: NTY

• Manufacturer: FAE
• Additional information: 33235 NRF
• Lisainfo: 33235 NRF

• Engine Code: 3RZ-FE
• Supplementary Article/Info 2: without fastening clamp
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS

• Operating voltage [V]: 12
• Sensor Type: NTC Sensor
• Number of pins: 2
• Name: Andur,sisendohu temperatuur
• Manufacturer: MEY

• Engine Code: 3RZ-FE
• Supplementary Article/Info 2: without fastening clamp
• Manufacturer: FACET

• Number of pins: 2
• Thread Size: M 12x1,5, M12x1,5
• Supplementary Article/Supplementary Info: with gasket/seal
• Housing Colour: green
• Power [W]: 0.06
• Manufacturer: METZGER

• Engine Code: 3RZ-FE
• Number of pins: 2
• Manufacturer: JPN

• Required quantity: 1
• Number of pins: 2
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Name: CZUJNIK POO½ENIA WAKA ROZRZ. TOYOTA
• Manufacturer: BRM

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Number of pins: 2
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP

• Sensor Type: Inductive Sensor
• Number of pins: 2
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Name: VA 366147
• Manufacturer: VALEO

• Takistus [oom]: 1 100
• Pistikkontaktide arv: 2
• Manufacturer: JPN

• Number of pins: 2
• Manufacturer: ERA

• Engine Code: 3RZ-FE
• Manufacturer: VALEO

• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRI

• Engine Code: 3RZ-FE
• Country Specific Design: Japan
• Name: ANDUR, VŽNTVOLL
• Manufacturer: EPS

• Sensor Type: Inductive Sensor
• Number of pins: 2
• Connector Shape: rectangular
• Supplementary Article/Info 2: without cable
• Resistor [Ohm]: 2,180
• Manufacturer: VALEO

• Required quantity: 1
• Number of pins: 2
• Country Specific Design: Japan
• not for country specific design: Japan
• Weight [g]: 33
• Gross Weight [g]: 60
• Name: DN DCPS0116
• Manufacturer: DENSO

• Construction Year from: 08.2001
• Oxygen Sensor: Regulating Sensor, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 410
• Weight [kg]: 0.092
• Name: SW 33 10 6784
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Oxygen Sensor: Regulating Sensor, Thread pre-greased
• Fabrication Number: ESL-TY-028
• Manufacturer: NTY

• Number of pins: 2
• Resistor [Ohm]: 1,100
• Housing Colour: black
• Manufacturer: METZGER

• Construction Year to: 08.2001
• Exhaust System: for pre-catalytic converter
• Thread Size: Flange 44
• Cable Length [mm]: 750
• Number of pins: 4
• Quality: OE
• Weight [g]: 145
• Gross Weight [g]: 216
• Manufacturer: DENSO
• Name: DN DOX-0110
• Quality class: Q

Oxygen Sensor: Regulating Sensor, Heated, Finger-type Sensor, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
PREVIA (TCR2/, TCR1/
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
PREVIA (TCR2/, TCR1/
(kvaliteediklass: Q)"

• Oxygen Sensor: Heated
• Number of pins: 4
• Cable Length [mm]: 500
• Fitting Position: Exhaust Manifold
• for OE number: 8946512540
• Manufacturer: MEAT & DORIA

• Height [mm]: 30
• Resistor [Ohm]: 1,100
• Number of connectors: 2
• Manufacturer: VERNET

• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: FAE

• Fitting Position: before catalytic converter
• Oxygen Sensor: Regulating Sensor, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 500
• Weight [kg]: 0.089
• Observe service information:
• Name: LAMBDA ANDUR
• Manufacturer: BLP

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 1
• Cable Length [mm]: 230
• Number of pins: 3
• Country Specific Design: Japan
• not for country specific design: Japan
• Weight [g]: 70
• Gross Weight [g]: 116
• Manufacturer: DENSO

• Fitting Position: before catalytic converter
• Oxygen Sensor: Regulating Sensor, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 500
• Weight [kg]: 0.089
• Name: SW 33 10 6772
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: before catalytic converter
• Oxygen Sensor: Regulating Sensor, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 500
• Weight [kg]: 0.089
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Sensor Type: Inductive Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 2
• Fitting Depth [mm]: 30
• Supplementary Article/Info 2: with seal ring