• Manufacturer: JP GROUP A/S
• Lisainfo: Sender Unit, coolant temperature
• Additional information: Sender Unit, coolant temperature

• Spanner Size: 13
• Material: Brass
• Number of pins: 1
• Thread Size: 1/8" - 28
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• for OE number: 8342087703
• Spanner Size: 13
• Manufacturer: KAMOKA

• Country Specific Design: Great Britain
• not for vehicle production country: Great Britain
• Manufactured in: Great Britain
• quality-tested in: Great Britain
• not for country specific design: Great Britain
• developed in: Great Britain
• Vehicle Production Country: Great Britain
• not manufactured in: Great Britain
• Engine Production Country: Great Britain
• Manufacturer: JPN

• Length [mm]: 60
• Spanner Size: 19
• Manufacturer: KAMOKA

• Fabrication Number: ECT-TY-002
• Manufacturer: NTY
• Name: NTY ECT-TY-002

• External Thread Size: 1/8" - 28
• Spanner Size: 13
• Number of connectors: 1
• Material: Brass
• Weight [kg]: 0.01
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: MD 091056
• Number of pins: 1
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• External Thread [mm]: 3/8-GAS
• Spanner Size: 19 MM
• Manufacturer: JPN

• External Thread Size: 1/8" - 28
• Spanner Size: 13
• Number of connectors: 1
• Material: Brass
• Weight [kg]: 0.01
• Name: SW 81 92 8265
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: 4A-FE
• Number of pins: 2
• Manufacturer: KAVO PARTS

• Sensor Type: NTC Sensor
• Number of pins: 2
• Manufacturer: ERA
• Additional information: 550860A ERA
• Lisainfo: 550860A ERA

• Length [mm]: 60
• Spanner Size: 19
• Colour: green
• Number of pins: 2
• Thread Size: M12x1,5
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: oval
• Number of pins: 1
• Socket colour: black
• Spanner Size: 12
• Thread Size: 1/8
• for OE number: 94854974
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Supplementary Article/Info 2: with plug
• Number of wires (repair kit, cable set): 2
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABA

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product. Name: Kaabli remondikomplekt, jahutusvedeliku temperatuuri andur

• Engine Code: 4A-FE
• Number of pins: 2
• Manufacturer: KAVO PARTS

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: 195321101000
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• for OE number: 89424-87703-000
• Colour: black
• Sensor Type: NTC Sensor
• Number of pins: 2
• Connector Shape: oval
• Fabrication Number: ECT-MZ-000
• Manufacturer: NTY
• Name: NTY ECT-MZ-000

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Spanner Size: 19
• Thread Size: M12x1.5
• for OE number: J8942220010
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Engine Code: 4A-FE
• Thread Size: 1/8 GAS
• Spanner Size: 13
• Corresponds to the original part in colour: black
• Name: EP 1.830.184
• Manufacturer: EPS

• Engine Code: 4A-FE
• Thread Size: 1/8 GAS
• Spanner Size: 13
• Corresponds to the original part in colour: black
• Manufacturer: FACET

• Engine Code: 4A-FE
• Supplementary Article/Info 2: without connector parts
• Name: Andur,sisendohu temperatuur
• Manufacturer: MAX

• Connector Shape: oval
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: S19
• Thread Size: M12*1,5
• Manufacturer: NISSENS

• Connector Shape: rectangular
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: S19
• Thread Size: M12*1,5
• Name: NI 207076
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Engine Code: 4A-FE
• Sensor Type: NTC Sensor
• Thread Size: M12x1,5
• Spanner Size: 19
• Colour: blue
• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Engine Code: 4A-FE
• Housing Colour: green
• Thread Size: M12x1,5
• Spanner Size: 19
• for article number: 1.880.113, 1.880.114, 1.880.149, 1.880.151
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Engine Code: 4A-FE
• Housing Colour: green
• Thread Size: M12x1,5
• Spanner Size: 19
• for article number: 7.8113, 7.8114, 7.8149, 7.8151
• Manufacturer: FACET

• Colour: blue
• Housing Colour: blue
• Number of pins: 2
• Thread Size: M12X1.5-6g
• Spanner Size: 19
• Manufacturer: DELPHI
• Name: DE TS10250

• Construction Year to: 09.1999
• Mounting Type: Bolted
• Voltage [V]: 12
• Resistor [Ohm]: 2,080, 280
• Supplementary Article/Supplementary Info: with gasket/seal
• Temperature range from [°C]: 25
• Temperature range to [°C]: +80
• Thread Size: M12x1,5
• Colour: green
• Sensor Type: NTC Sensor
• Number of pins: 2
• Colour Coding: grey
• Corresponds to the original part in colour: green
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT009107481

Brief Information: *** HELLA Electronics OE competence for over 60 years.

Manufacturer: FAE

• Housing Colour: green
• Number of pins: 2
• Thread Size: M 12x1,5
• Manufacturer: FAE

• Length [mm]: 60
• External Thread Size: M12 x 1,5
• Spanner Size: 19
• Number of connectors: 2
• Colour: green
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 2
• Connector Shape: oval
• Colour: black
• Sensor Type: NTC Sensor
• for OE number: BP4W18845
• Manufacturer: MEAT&DORIA

Manufacturer: MAGNETI MARELLI

• Fitting Position: Front, Rear
• Supplementary Article/Info 2: with cable
• Sensor Type: Ultrasonic Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• for OE number: 8 318 112 020
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Connector Shape: oval
• Fabrication Number: ECP-TY-020
• Manufacturer: NTY
• Name: NTY ECP-TY-020

• for OE number: 9 091 905 011
• Cable Length [mm]: 230
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Fabrication Number: ECP-TY-000
• Manufacturer: NTY

• Manufacturer: FAE
• Additional information: 33235 NRF
• Lisainfo: 33235 NRF

• Number of pins: 2
• Supplementary Article/Supplementary Info: with gasket/seal
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Colour: green
• Number of pins: 2
• Supplementary Article/Supplementary Info: with gasket/seal
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Engine Code: 4A-FE
• Supplementary Article/Info 2: without fastening clamp
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: EPS

• Operating voltage [V]: 12
• Sensor Type: NTC Sensor
• Number of pins: 2
• Name: Andur,sisendohu temperatuur
• Manufacturer: MEY

• Engine Code: 4A-FE
• Supplementary Article/Info 2: without fastening clamp
• Manufacturer: FACET

• Number of pins: 2
• Thread Size: M 12x1,5, M12x1,5
• Supplementary Article/Supplementary Info: with gasket/seal
• Housing Colour: green
• Power [W]: 0.06
• Manufacturer: METZGER

• Engine Code: 4A-FE
• Alternatively:
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Connector Shape: rectangular
• Weight [kg]: 0.024
• Alternative Repair Kit: 550144
• Manufacturer: ERA

• Vehicle Production Country: Japan
• Fitting Position: Front Axle Left
• Length [mm]: 850
• Fabrication Number: HCA-TY-087
• paired article number: HCA-TY-086
• Manufacturer: NTY

• Vehicle Production Country: Japan
• Fitting Position: Front Axle Right
• Fabrication Number: HCA-TY-086
• paired article number: HCA-TY-087
• Manufacturer: NTY

• Engine Code: 4A-FE
• Number of pins: 2
• Manufacturer: JPN

• Fitting Position: Rear
• Manufacturer: YSPARTS

• Fitting Position: Front, Rear
• Voltage [V]: 12
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 28SKV083

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV

• Vehicle Production Country: Japan
• Fitting Position: Front Axle Right
• Sensor Type: Passive sensor
• Length [mm]: 870
• Socket colour: grey

• Vehicle Production Country: Japan
• Fitting Position: Front Axle Left
• Sensor Type: Passive sensor
• Length [mm]: 870
• Socket colour: grey

• Number of pins: 3
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle Right
• Manufacturer: ASHIKA

• Engine Code: 4A-FE
• Alternatively:
• Number of pins: 2
• Alternative Repair Kit: 550777
• Manufacturer: ERA

• Fitting Position: Rear Axle Left
• Manufacturer: ASHIKA

• Fitting Position: Rear Axle Right
• Manufacturer: JAPKO

• Vehicle Production Country: Japan
• Fitting Position: Rear Axle Right
• Fabrication Number: HCA-TY-088
• paired article number: HCA-TY-089
• Manufacturer: NTY

• Vehicle Production Country: Japan
• Fitting Position: Rear Axle Left
• Fabrication Number: HCA-TY-089
• paired article number: HCA-TY-088
• Manufacturer: NTY

• Fitting Position: Rear Axle Left
• Manufacturer: JAPKO

• Fitting Position: Front Axle Right
• Quantity: 1
• Vehicle Production Country: Japan
• paired article number: 294509
• Net weight [kg]: 0.14
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: NK

• Fitting Position: Front Axle Left
• Cable Length [mm]: 850
• Number of pins: 2
• Sensor Type: Passive sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle, Rear Axle Right
• paired article number: GH-714588V
• Manufacturer: AUTO-GH

Manufacturer: NRF

• Fitting Position: Front Axle Right
• Cable Length [mm]: 860
• Number of pins: 2
• Sensor Type: Passive sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front Axle
• Length [mm]: 870
• Number of pins: 2
• Plug Type: Male
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Weight [kg]: 0.16
• Colour: grey
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 06SKV189

• Fitting Position: Rear
• Colour: black
• Manufacturer: MAGNETI MARELLI
• Name: MM SDP090

• Fitting Position: Front Axle
• Length [mm]: 870
• Number of pins: 2
• Plug Type: Male
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Weight [kg]: 0.16
• Colour: grey
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 06SKV190

• Fitting Position: Front Axle Left
• Vehicle Production Country: Japan
• Overall Length [mm]: 950
• Length [mm]: 21
• Sensor Type: Passive sensor
• Socket colour: grey
• Cable Length [mm]: 870
• paired article number: 31030
• Weight [kg]: 0.2
• Manufacturer: ABS

• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• for OE number: 8318112020
• Manufacturer: MEAT&DORIA

• Fitting Position: Front Axle Left
• Manufacturer: ASHIKA

• Engine Code: 4A-FE
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA ELEKTRYKA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 09.1999
• Manufacturer: VALEO

• Fitting Position: Front Axle Left
• Manufacturer: JAPKO

• Fitting Position: Front Axle Right
• Cable Length [mm]: 915
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Manufacturer: FAE

• Cable Length [mm]: 400
• Alternatively:
• Number of pins: 2
• Fitting Depth [mm]: 30
• Total Length [mm]: 460
• Manufacturer: ERA

• Fitting Position: Rear Axle Right
• Cable Length [mm]: 1,100
• Sensor Type: Passive sensor
• paired article number: 06-S381
• Manufacturer: OPTIMAL ZAWIESZENIE

• Fitting Position: Rear Axle Left
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: JPA

• Engine Code: 4A-FE
• Name: ANDUR, VŽNTVOLL
• Manufacturer: EPS

• Fitting Position: Front Axle Left
• Cable Length [mm]: 870
• paired article number: 06-S373
• Manufacturer: OPTIMAL ZAWIESZENIE

• Fitting Position: Front Axle Right
• Cable Length [mm]: 870
• paired article number: 06-S376
• Manufacturer: OPTIMAL ZAWIESZENIE

• Oxygen Sensor: Regulating Sensor
• Manufacturer: ASHIKA

• Fitting Position: Front Axle, Front Axle Left
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 910
• Name: DE SS20288
• Manufacturer: DELPHI

• Oxygen Sensor: Regulating Sensor
• Manufacturer: JAPKO

• Fitting Position: Rear Axle Right
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: JPA

• Fitting Position: Front Axle Right
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 910
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE SS20289

• Number of connectors: 3
• Weight [kg]: 0.03
• Manufacturer: BLUE PRINT ELEKTRYKA

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Right
• Number of pins: 2
• paired article number: 54024
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear
• Sensor Type: Ultrasonic Sensor
• Chemical Properties: Paintable
• Supplementary Article/Info 2: with cable
• Manufacturer: METZGER

• Construction Year to: 09.1999
• Transmission Type: Manual Transmission
• Exhaust System: for pre-catalytic converter
• Thread Size: Flange 54
• Cable Length [mm]: 750
• Number of pins: 4
• Quality: OE
• Weight [g]: 156
• Gross Weight [g]: 228
• Manufacturer: DENSO
• Name: DN DOX-0111
• Quality class: Q

Oxygen Sensor: Regulating Sensor, Heated, Finger-type Sensor, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
COROLLA COMPACT (/E1
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
COROLLA COMPACT (/E1
(kvaliteediklass: Q)"

• Required quantity: 1
• Cable Length [mm]: 230
• Number of pins: 2
• Country Specific Design: Japan
• not for country specific design: Japan
• Weight [g]: 49
• Gross Weight [g]: 95
• Manufacturer: DENSO
• Name: DN DCPS0102