Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Spanner Size: 13
- Material: Brass
- Number of pins: 1
-
Thread Size: 1/
8" - 28 -
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MAX
- for OE number: 8342087703
- Spanner Size: 13
- Manufacturer: KAMOKA
- Engine Code: 2E
- Pressure [bar]: 0.2
-
Thread Size: 1/
8 GAS - Spanner Size: 24
- Manufacturer: FACET
- Engine Code: 2E
- Pressure [bar]: 0.2
-
Thread Size: 1/
8 GAS - Spanner Size: 24
- Name: OLISURVELLITUS
- Manufacturer: EPS
- Pressure [bar]: 0.4
- Manufacturer: JPN
- Number of pins: 1
- Plug Type: Blade Terminal
- Colour: black
- Pressure from [bar]: 0.3
-
Thread Size: 1/
8"x28 BSP - Spanner Size: 24
- for OE number: MC840219
- Manufacturer: MEAT&DORIA
- Colour: black
- Sensor Type: NTC Sensor
- Connector Shape: round
- Spanner Size: 12
- Number of pins: 1
- Manufacturer: JPN
- Switch Pressure [bar]: 0.3
-
Thread Size: 1/
8x28 BSPT -
Sensor Type: Closed-
type Sensor - Name: OLISURVELLITUS
- Manufacturer: VER
- Sensor Type: NTC Sensor
- Mounting Type: Bolted
- Number of pins: 1
- Spanner Size: 12
-
Thread Size: 1/
8 - for OE number: 4671065
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: NRF
- Pressure [bar]: 0.4
-
Thread Size: 1/
8- GAS - Spanner Size: 24 MM
- Manufacturer: JPN
-
External Thread Size: 1/
8" - 28 - Spanner Size: 13
- Number of connectors: 1
- Material: Brass
- Weight [kg]: 0.01
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: MD 091056
- Number of pins: 1
- Weight [kg]: 0.02
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Pressure [bar]: 0.3
-
Thread Size: 1/
8 GAS - Spanner Size: 27
- Technical Information Number: circuit N.C.
- Manufacturer: ERA
-
Thread Size: 1/
8 GAS - Spanner Size: 13
- Number of pins: 1
- Manufacturer: ERA
- Sensor Type: NTC Sensor
- Number of pins: 2
- Manufacturer: ERA
- Additional information: 550860A ERA
- Lisainfo: 550860A ERA
- Engine Code: 2E
-
Thread Size: 1/
8 GAS - Spanner Size: 13
- Manufacturer: FACET
- Engine Code: 2E
-
Thread Size: 1/
8 GAS - Spanner Size: 13
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
Manufacturer: MAGNETI MARELLI
-
Engine Code: 2E,
2EE - Construction Year to: 04.1992
- Plug Type: Blade Terminal
-
Manufacturer: BOSCH KOMFORT/
CZESCI ELEKTRYCZNE
- Supplementary Article/Info 2: with plug
- Number of wires (repair kit, cable set): 2
- Manufacturer: ABA
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product. Name: Kaabli remondikomplekt, jahutusvedeliku temperatuuri andur
- Engine Code: 2E
- Number of pins: 2
- Manufacturer: KAVO PARTS
-
for OE number: 89424-
87703- 000 - Colour: black
- Sensor Type: NTC Sensor
- Number of pins: 2
- Connector Shape: oval
-
Fabrication Number: ECT-
MZ- 000 - Manufacturer: NTY
-
Name: NTY ECT-
MZ- 000
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Thread Size: 1/
8x28 BSPT - Manufacturer: VERNET
- Sensor Type: NTC Sensor
- Mounting Type: Bolted
- Connector Shape: rectangular
- Number of pins: 2
- Spanner Size: 19
- Thread Size: M12x1.5
- for OE number: J8942220010
- Supplementary Article/Info 2: with seal ring
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: NRF
- Engine Code: 2E
- Sensor Type: NTC Sensor
-
Thread Size: M12x1,
5 - Spanner Size: 19
- Supplementary Article/Info 2: with seal ring
- Colour: green
- Number of pins: 2
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: MEY
- Engine Code: 2E
- Supplementary Article/Info 2: without connector parts
-
Name: Andur,
sisendohu temperatuur - Manufacturer: MAX
- Engine Code: 2E
-
Thread Size: M12x1,
5 - Spanner Size: 19
- Corresponds to the original part in colour: green
-
for article number: 7.8606,
7.8732, 7.8733 - Manufacturer: FACET
- Engine Code: 2E
-
Thread Size: M12x1,
5 - Spanner Size: 19
- Corresponds to the original part in colour: green
-
for article number: 1.880.606,
1.880.732, 1.880.733 -
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
-
Mounting Type: Flat Plug-
in Connector, Bolted - Voltage [V]: 12
-
Resistor [Ohm]: 628,
70 - Temperature range from [°C]: 25
- Temperature range to [°C]: 80
-
Thread Size: 1/
8 GAS - Spanner Size: 13
- Sensor Type: NTC Sensor
- Number of pins: 1
- Housing Colour: black
- Assy./disassy. by qualified personnel required!:
- Name: HE 6PT009107651
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Number of pins: 2
- Connector Shape: oval
- Colour: black
- Sensor Type: NTC Sensor
- for OE number: BP4W18845
- Manufacturer: MEAT&DORIA
- Engine Code: 2E
- Manufacturer: FAE
- Additional information: 33235 NRF
- Lisainfo: 33235 NRF
- Colour: green
- Number of pins: 2
-
Supplementary Article/Supplementary Info: with gasket/
seal - Weight [kg]: 0.3
- Packaging length [cm]: 12
- Packaging width [cm]: 8
- Packaging height [cm]: 6
- Operating voltage [V]: 12
- Sensor Type: NTC Sensor
- Number of pins: 2
-
Name: Andur,
sisendohu temperatuur - Manufacturer: MEY
- Engine Code: 2E
- Number of pins: 2
- Manufacturer: JPN
- Number of pins: 2
-
Thread Size: M 12x1,
5, M12x1, 5 -
Supplementary Article/Supplementary Info: with gasket/
seal - Housing Colour: green
- Power [W]: 0.06
- Manufacturer: METZGER
- Engine Code: 2E
- Supplementary Article/Info 2: without fastening clamp
- Manufacturer: FACET
- Engine Code: 2E
- Supplementary Article/Info 2: without fastening clamp
-
Name: ANDUR,
SISENDOHU TEMPERATUUR - Manufacturer: EPS
- Oxygen Sensor: Unheated
- Lisainfo: Lambda sensor
- Additional information: Lambda sensor
- Oxygen Sensor: Regulating Probe
- Voltage [V]: 12
- Length [mm]: 470
- Guarantee: 3 years guarantee
- Number of circuits: 1
- Weight [kg]: 0.12
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Oxygen Sensor: Regulating Probe
- Manufacturer: ASHIKA
- Oxygen Sensor: Regulating Probe
- Manufacturer: JAPKO
-
Oxygen Sensor: Regulating Probe,
Finger probe, Unheated - Engine Code: 2E
- Cable Length [mm]: 505
-
Name: DE ES10226-
12B1 - Manufacturer: DELPHI
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks