• Supplementary Article/Info 2: without cable
• Number of pins: 3
• for OE number: 33220-63J10
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

Manufacturer: MAGNETI MARELLI

• Colour: brown
• Thread Size: M12x125
• Number of pins: 2
• Manufacturer: JPN

• Thread Size: M12x125
• Sensor Type: NTC Sensor
• Number of pins: 2
• Housing Colour: brown
• Manufacturer: FAE

• Engine Code: M16A
• Thread Size: M12x1,5
• Spanner Size: 19
• Corresponds to the original part in colour: brown
• Name: EP 1.830.351
• Manufacturer: EPS

• Engine Code: M16A
• Thread Size: M12x1,5
• Spanner Size: 19
• Corresponds to the original part in colour: brown
• Manufacturer: FACET

• Fabrication Number: ESS-SU-000
• Manufacturer: NTY
• Name: NTY ESS-SU-000

• Engine Code: M16A
• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11461

• Fabrication Number: ECP-CT-014
• Manufacturer: NTY

• Engine Code: M16A
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Connector Shape: oval
• Fabrication Number: ECM-SU-001
• Manufacturer: NTY

• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Outer Diameter [mm]: 18
• Number of connectors: 3
• Weight [kg]: 0.02
• for OE number: 33220-63J10
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: M16A
• Number of pins: 3
• Manufacturer: KAVO

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Fitting Position: Front, before catalytic converter
• Oxygen Sensor: Regulating Sensor, Thread pre-greased
• Fabrication Number: ESL-SU-000
• Manufacturer: NTY

• Required quantity: 1
• Manufacturer: BREMI

• Outer Diameter [mm]: 18.4
• Number of connectors: 3
• Weight [kg]: 0.02
• for OE number: 33220-63J10
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Housing Type: without housing
• Fabrication Number: EPP-MZ-001
• Manufacturer: NTY
• Name: NTY EPP-MZ-001

• Number of pins: 5
• Connector Shape: rectangular
• Assy./disassy. by qualified personnel required!:
• Name: AB 120-08-085
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of pins: 3
• Manufacturer: JPN

• Voltage [V]: 12
• Housing Type: without housing
• Number of pins: 5
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.07
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Oxygen Sensor: Regulating Sensor
• Number of circuits: 4
• Manufacturer: KAMOKA

• Fitting Position: Front, after catalytic converter
• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-FT-003
• Manufacturer: NTY

• Fitting Position: Front, after catalytic converter
• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-FT-002
• Manufacturer: NTY

• Oxygen Sensor: Diagnostic Probe
• Cable Length [mm]: 900
• Manufacturer: NTY

• Housing Type: with housing, without housing
• Fabrication Number: EPP-TY-006
• Manufacturer: NTY

• Engine Code: M16A
• Number of pins: 3
• Fitting Depth [mm]: 27
• Supplementary Article/Info 2: with seal ring
• Connector Shape: oval
• Rated Voltage [V]: 12
• Manufacturer: ERA

• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.06
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 07SKV193

• Engine Code: M16A
• Required quantity: 1
• Name: EP 1.953.585
• Manufacturer: EPS

• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• for OE number: 3322063J10000
• Manufacturer: MEAT&DORIA

• for OE number: 13800-63J00
• Number of pins: 5
• Quality class: PJ
• Name: Air flow sensor

• Engine Code: M16A
• Required quantity: 1
• Manufacturer: FACET

• Number of pins: 5
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Oxygen Sensor: Switching-type Oxygen Sensor
• Voltage [V]: 12
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 13
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV913

• Number of pins: 3
• Manufacturer: JPN

• Required quantity: 1
• Number of pins: 3
• Number of connectors: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 27
• Housing Colour: black
• Connector Shape: oval
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 5
• Housing Type: without housing
• Manufacturer: JP GROUP
• Lisainfo: Air Mass Sensor
• Additional information: Air Mass Sensor

• Number of pins: 5
• Housing Type: without housing
• Manufacturer: JP GROUP
• Lisainfo: Air Mass Sensor
• Additional information: Air Mass Sensor

• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Quality: OE
• Weight [g]: 103
• Gross Weight [g]: 147
• Manufacturer: DENSO
• Name: DN DOX-0109
• Lisainfo: DOX-0109 DENSO
• Additional information: DOX-0109 DENSO

Oxygen Sensor: Diagnostic Probe, Heated, Finger-type Sensor, Switching-type Oxygen Sensor

• Number of pins: 3
• Pressure from [kPA]: 13
• Manufacturer: DELPHI ELEKTRONIKA

• Construction Year to: 12.2015
• Required quantity: 1
• Engine Code: M16A
• Mounting Type: Bolted
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PP358152231

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Conductor Number: 4
• Length [mm]: 500
• Resistor [Ohm]: 6
• Number of circuits: 4
• Cable Length [mm]: 500
• Oxygen Sensor: Heated
• Manufacturer: MAGNETI MARELLI
• Name: MM OSM029

• Length [mm]: 635
• Resistor [Ohm]: 13
• Number of circuits: 4
• Conductor Number: 4
• Cable Length [mm]: 635
• Oxygen Sensor: Heated
• Manufacturer: MAGNETI MARELLI
• Name: MM OSM120

• Exhaust System: for pre-catalytic converter
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Quality: OE
• Weight [g]: 95
• Gross Weight [g]: 144
• Manufacturer: DENSO
• Name: DN DOX-0113
• Quality class: Q

Oxygen Sensor: Regulating Sensor, Heated, Finger-type Sensor, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
SPACE WAGON (N5/W),
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
SPACE WAGON (N5/W),
(kvaliteediklass: Q)"

• Voltage [V]: 12
• Number of pins: 5
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.07
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 07SKV102

• Vehicle Identification Number (VIN) to: 00300000
• Oxygen Sensor: Diagnostic Probe, Heated
• Number of pins: 4
• Cable Length [mm]: 570
• for OE number: 71747242
• Manufacturer: MEAT&DORIA

• Cable Length [mm]: 151
• Number of pins: 1
• Manufacturer: DELPHI
• Name: DE AS10252

• Number of pins: 3
• Colour: black
• Supplementary Article/Info 2: with seal ring
• Connector Shape: oval
• Number of mounting bores: 2
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Oxygen Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 635
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.14
• Resistor [Ohm]: 13
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV623

• Voltage [V]: 12
• Number of pins: 5
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.11
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 07SKV107

• Engine Code: M16A
• Vehicle Identification Number (VIN) to: JSAGYA21S00150001
• Fitting Position: after catalytic converter
• Required quantity: 1
• Cable Length [mm]: 650
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.998.235
• Number of circuits: 4
• Name: EP 1.998.563
• Manufacturer: EPS

Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased

• Vehicle Identification Number (VIN) to: JSA********300000, TSM********450000
• Block Separation:
• Oxygen Sensor: Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 370
• Weight [kg]: 0.001
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Pressure from [kPA]: 10
• Pressure to [kPA]: 120
• for OE number: 71742176
• Manufacturer: MEAT&DORIA

• Engine Code: M16A
• Vehicle Identification Number (VIN) to: JSAGYA21S00150001
• Fitting Position: after catalytic converter
• Required quantity: 1
• Cable Length [mm]: 650
• Conductor Number: 4
• Available as universal article as well, see article no.: 10.8235
• Number of circuits: 4
• Manufacturer: FACET

Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased

• Oxygen Sensor: Regulating Sensor, Planar Sensor, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 500
• Name: DE ES21352-12B1
• Manufacturer: DELPHI

• Fitting Position: Front, after catalytic converter
• Length [mm]: 640
• Thread Size: M18x1.5mm
• Number of pins: 4
• Oxygen Sensor: Heated
• Manufacturer: KAVO

• Construction Year from: 12.2007
• Construction Year to: 12.2015
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Vehicle Identification Number (VIN) to: 00300000
• Block Separation:
• Vehicle Identification Number (VIN) from: 00300001
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH

• Oxygen Sensor: Switching-type Oxygen Sensor
• Cable Length [mm]: 290
• Alternatively:
• Number of circuits: 4
• Alternative Repair Kit: 570112
• Manufacturer: ERA

• Vehicle Identification Number (VIN) to: JSA********300000, TSM********450000
• Block Separation:
• Oxygen Sensor: Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 370
• Weight [kg]: 0.001
• Observe service information:
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: M16A
• Fitting Position: before catalytic converter
• Vehicle Production Country: Russia
• Required quantity: 1
• Cable Length [mm]: 500
• Conductor Number: 4
• Available as universal article as well, see article no.: 1.998.235
• Number of circuits: 4
• Name: EP 1.998.316
• Manufacturer: EPS

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Thread pre-greased

• Voltage [V]: 12
• Number of pins: 5
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.11
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 07SKV151

• Number of pins: 5
• Manufacturer: JPN

Manufacturer: MAGNETI MARELLI

Manufacturer: MAGNETI MARELLI

• Oxygen Sensor: Diagnostic Probe, Planar Sensor, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 635
• Name: DE ES20111-12B1
• Manufacturer: DELPHI

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Housing Type: without housing
• Manufacturer: BREMI

• Engine Code: M16A
• Required quantity: 1
• Pressure from [kPA]: 10
• Pressure to [kPA]: 120
• Output Voltage, from [V]: 0.39
• Output Voltage, up to [V]: 4.74
• Manufacturer: EPS

Manufacturer: JAPKO

• Oxygen Sensor: Switching-type Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.15
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV427

• Engine Code: M16A
• Vehicle Identification Number (VIN) to: JSAGYA21S00150001
• Required quantity: 1
• Housing Type: without housing
• Name: EP 1.991.163
• Manufacturer: EPS

• for OE number: 1380084E00000
• Manufacturer: MEAT&DORIA

• Engine Code: M16A
• Vehicle Identification Number (VIN) to: JSAGYA21S00150001
• Required quantity: 1
• Housing Type: without housing
• Manufacturer: FACET

• Number of connectors: 5
• Manufacturer: JPN

• Engine Code: M16A
• Vehicle Identification Number (VIN) from: JSAGYA21S00150002
• Fitting Position: after catalytic converter
• Required quantity: 1
• Cable Length [mm]: 650
• Conductor Number: 4
• Supplementary Article/Info 2: with fastening material
• Available as universal article as well, see article no.: 1.998.235
• Number of circuits: 4
• Name: EP 1.998.373
• Manufacturer: EPS

Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased

• Construction Year from: 12.2007
• Construction Year to: 12.2015
• Length [mm]: 514
• Conductor Number: 5
• Number of circuits: 5
• Cable Length [mm]: 514
• Oxygen Sensor: Heated
• Manufacturer: MAGNETI MARELLI

• Number of pins: 5
• Supplementary Article/Info 2: with seal ring
• Number of Holes: 2
• Manufacturer: ERA

• Alternatively:
• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Housing Type: without housing
• Manufacturer: BREMI

• Exhaust System: for pre-catalytic converter
• Thread Size: M18x1.5
• Cable Length [mm]: 485
• Number of pins: 4
• Manufacturer Restriction: DENSO
• for OE number: 1821370H02
• Quality: OE
• Weight [g]: 93
• Gross Weight [g]: 126
• Manufacturer: DENSO
• Name: DN DOX-0351
• Quality class: Q

Oxygen Sensor: Regulating Sensor, Heated, Finger-type Sensor, Thread pre-greased, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
LIANA (ER), 10.01-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
LIANA (ER), 10.01-
(kvaliteediklass: Q)"

• Construction Year from: 12.2007
• Construction Year to: 12.2015
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Vehicle Identification Number (VIN) from: 00300001
• Number of circuits: 4
• Overall Length [mm]: 640
• Available as universal article as well, see article no.: 0258986602
• Recommended change interval [km]: 250,000
• Manufacturer: BOSCH

• Thread Size: M18x1.5
• Cable Length [mm]: 630
• Number of pins: 4
• Manufacturer Restriction: DENSO
• for OE number: 1821360J00
• Quality: OE
• Weight [g]: 103
• Gross Weight [g]: 132
• Manufacturer: DENSO
• Name: DN DOX-0326
• Quality class: Q

Oxygen Sensor: Diagnostic Probe, Heated, Finger-type Sensor, Thread pre-greased, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
SWIFT II SEDAN (AH,
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
SWIFT II SEDAN (AH,
(kvaliteediklass: Q)"

• Oxygen Sensor: Switching-type Oxygen Sensor
• Voltage [V]: 12
• Colour: red
• Guarantee: 3 years guarantee
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Alternatively:
• Number of pins: 5
• Manufacturer: ERA

• Construction Year to: 12.2015
• Required quantity: 1
• Vehicle Identification Number (VIN) to: JSAGYA21S00150001
• Engine Code: M16A
• Mounting Type: Bolted
• Number of pins: 5
• Housing Colour: black
• Plug Type: Male
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 8ET009142891

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: M16A
• Operating Mode: Electric
• Voltage [V]: 12
• Manufacturer: PIERBURG

• Engine Code: M16A
• Vehicle Identification Number (VIN) from: JSAGYA21S00150002
• Fitting Position: before catalytic converter
• Required quantity: 1
• Cable Length [mm]: 500
• Conductor Number: 5
• Supplementary Article/Info 2: with fastening material
• Number of circuits: 5
• Name: EP 1.998.435
• Manufacturer: EPS

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased

• Housing Type: without housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Manufacturer: DELPHI
• Name: DE AF10135-12B1

• Construction Year to: 12.2015
• Required quantity: 1
• Vehicle Identification Number (VIN) from: JSAGYA21S00150002
• Engine Code: M16A
• Mounting Type: Plugged
• Number of pins: 5
• Supplementary Article/Supplementary Info: without suction pipe
• Assy./disassy. by qualified personnel required!:
• Name: HE 8ET009142961
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Oxygen Sensor: Switching-type Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.15
• Always compare old and new part (in particular OE No.):
• Technical Information: Universal
• Name: CE 09SKV915
• Manufacturer: ESEN SKV

• Construction Year from: 12.2007
• Construction Year to: 12.2015
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Vehicle Identification Number (VIN) from: 00300001
• Number of circuits: 5
• Overall Length [mm]: 570
• Recommended change interval [km]: 250,000
• Manufacturer: BOSCH

• for OE number: 13800-54L00, 22204-28010
• Number of pins: 5
• Quality: OE
• Operating Mode: Electric
• Gross Weight [g]: 58
• alternative item: -
• Manufacturer: DENSO
• Name: DN DMA-0111

Additional information: "Tootja: DENSO
NOAH (ZRR7/), 12.01-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
NOAH (ZRR7/), 12.01-
(kvaliteediklass: Q)"

• for OE number: 13800-63J00, 22204-21010
• Number of pins: 5
• Quality: OE
• Operating Mode: Electric
• Gross Weight [g]: 79
• alternative item: -
• Name: DN DMA-0113
• Manufacturer: DENSO

Additional information: "Tootja: DENSO
HILUX SAMOCHÓD TEREN
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
HILUX SAMOCHÓD TEREN
(kvaliteediklass: Q)"

• Operating Mode: Electric
• Manufacturer: MAGNETI MARELLI

• Line insulation design: with silicone-coated woven-fibre insulation
• Thread Size: M18 x 1,5
• Number of circuits: 4
• Connector Shape: angular
• Socket colour: black
• for OE number: 18213-57KA0-000
• Number of pins: 4
• Length [mm]: 400
• Cable Length [mm]: 350
• Oxygen Sensor: Regulating Sensor, Thread pre-greased
• Fitting Position: before catalytic converter
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: M16A
• Operating Mode: Electric
• Voltage [V]: 12
• Manufacturer: PIERBURG

• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Fitting Depth [mm]: 26.8
• Supplementary Article/Info 2: with seal ring