• Fitting Position: Front Axle Left, Front Axle Right
• Lisainfo: Protective Cap/Bellow, shock absorber
• Additional information: Protective Cap/Bellow, shock absorber

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Lisainfo: Shock Absorber
• Additional information: Shock Absorber

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: AB-VW-009

• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle
• Bellows Material: Thermoplast
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Width [mm]: 59
• Thickness [mm]: 180
• Material: PP (Polypropylene)
• Fitting Position: Rear Axle
• Weight [kg]: 0.032
• Name: SW 30 92 2142
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 6N0413175A
• Fitting Position: Front Axle
• Height [mm]: 193
• Material: Thermoplast
• Weight [g]: 64
• Diameter 1 [mm]: 63.6
• Diameter 2 [mm]: 74
• Name: IM 37485
• Manufacturer: ORIGINAL IMPERIUM

Fitting Position: Front Axle

• Outer Diameter [mm]: 68, 80
• Material: Thermoplast
• Fitting Position: Front Axle
• Weight [kg]: 0.07
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Outer Diameter [mm]: 68, 80
• Material: Thermoplast
• Fitting Position: Front Axle
• Weight [kg]: 0.07
• Name: SW 30 93 6006
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Model Year to: 2013
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Bottom eye
• Weight [kg]: 0.144
• Packaging length [cm]: 4.2
• Packaging width [cm]: 4.2
• Packaging height [cm]: 3.7
• Manufacturer: FEBEST

• Fitting Position: Front Axle
• Weight [kg]: 0.108
• Packaging length [cm]: 19
• Packaging width [cm]: 7.8
• Packaging height [cm]: 7.8
• Manufacturer: FEBEST

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber Design: Suspension Strut
• Name: CFD 563401
• Manufacturer: DACO

Suspension: for vehicles without sports suspension, for vehicles without bad road version, for vehicles without increased ground clearance

• Fitting Position: Rear Axle
• Suspension: for vehicles with sports suspension
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Suspension Strut
• Manufacturer: DENCKERMANN AMORTYZATORY

for OE number: 3C0 513 049 AP, 3C0 513 049 AR, 3C0 513 049 BD, 3C0 513 049 BE, 3C0 513 049 BF, 3C0 513 049 BG, 3C0 513 049 BR, 3C0 513 049 CP, 3C0 513 049 CR

• Fitting Position: Rear Axle
• Article number of recommended accessories: MK203, PK137
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Max. Length [mm]: 593
• Shock Absorber Design: Spring-bearing Damper
• Name: CFD 564773
• Manufacturer: DACO

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Suspension Strut Insert
• Shock Absorber System: Twin-Tube
• Lisainfo: Shock Absorber
• Additional information: Shock Absorber

Suspension: for vehicles without sports suspension, for vehicles without bad road version

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• for PR number: G07
• Shock Absorber Design: Suspension Strut
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom Pin
• Housing Diameter in Clamping Area [mm]: 55
• Manufacturer: DENCKERMANN AMORTYZATORY

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Diameter 1/ Diameter 2 [mm]: 25/55
• Article number of recommended accessories: SMA0148
• Shock Absorber Mounting Type: Top pin
• Manufacturer: ASHIKA

• Suspension: for vehicles with standard suspension
• Shock Absorber Type: Gas Pressure
• Fitting Position: Front Axle
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Plate, Top pin
• Suspension Strut Outer Diameter [mm]: 55
• Shock Absorber System: Twin-Tube
• Quality class: PJ
• Name: Gas shock absorber

• Fitting Position: Rear Axle
• Article number of recommended accessories: PK137, MK203, PK078
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Weight [kg]: 1.7
• Bore Ø [mm]: 30
• Length 1 [mm]: 370
• Length 2 [mm]: 593
• Piston Rod Diameter [mm]: 12.4, 13
• Observe service information:
• Packaging length [cm]: 50.5
• Packaging width [cm]: 6.4
• Packaging height [cm]: 6.4
• Manufacturer: MONROE

Warranty: 5 years warranty with accessories when replaced in pairs

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• not for PR number: G07
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Housing Diameter [mm]: 55
• Shock Absorber Mounting Type: Bottom Pin
• Manufacturer: DENCKERMANN AMORTYZATORY

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• for PR number: G02
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Diameter [mm]: 54
• Length 1 [mm]: 560
• Length 2 [mm]: 367
• Piston Rod Diameter [mm]: 24
• Quantity per axle: 1
• Observe technical data:
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• for PR number: 1JA
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Diameter [mm]: 39
• Length 1 [mm]: 586
• Length 2 [mm]: 374
• Piston Rod Diameter [mm]: 12
• Quantity per axle: 1
• Observe technical data:
• Manufacturer: TRW
• Additional information: JGT1054T
• Lisainfo: JGT1054T

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Suspension: for vehicles with bad road version
• for PR number: G55, G56
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Diameter [mm]: 54
• Length 1 [mm]: 367
• Length 2 [mm]: 560
• Piston Rod Diameter [mm]: 24
• Quantity per axle: 1
• Observe technical data:
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Weight [kg]: 4
• Bore Ø [mm]: 32
• Observe technical data:
• Length 1 [mm]: 391
• Length 2 [mm]: 553
• Piston Rod Diameter [mm]: 22
• Article number of recommended accessories: MK194, PK163
• Packaging length [cm]: 51.5
• Packaging width [cm]: 16.2
• Packaging height [cm]: 16.2
• Housing Diameter in Clamping Area [mm]: 55
• Manufacturer: MONROE

Warranty: 5 years warranty with accessories when replaced in pairs

• not for vehicle type: Personal data
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber System: Twin-Tube
• Suspension Strut Outer Diameter [mm]: 55
• Piston Rod Diameter [mm]: 25
• Manufacturer: KAYABA
• Name: KY 335808
• Additional information: KYB335808
• Lisainfo: KYB335808

Suspension: for vehicles with bad road version, for vehicles without sports suspension, for vehicles without increased ground clearance, for vehicles with standard suspension Technical Information: Please refer to the technical drawing in "Documents"

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Bottom eye, Top pin
• General Information: gas shock absorber; rear
• Manufacturer: BORSEHUNG

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Check OE number:
• Shock Absorber Design: Telescopic Shock Absorber
• Parameter: SEOV30/13X222A
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Manufacturer: SACHS

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: KAYABA
• Name: KY 3440030

Suspension: for vehicles without bad road version, for vehicles without sports suspension, for vehicles without increased ground clearance

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• not for PR number: G07
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: SFE36/25X157A
• Housing Diameter [mm]: 55
• Shock Absorber Mounting Type: Top pin
• Manufacturer: SACHS

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• for PR number: G07
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Type: Gas Pressure
• Parameter: SFE36/25X164A
• Housing Diameter [mm]: 55
• Shock Absorber Mounting Type: Top pin
• Manufacturer: SACHS

SVHC: No information available, please contact the manufacturer!

• Suspension: for vehicles with sports suspension
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Vehicle Equipment: for vehicles without leveling control
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: Gas shock absorber
• Quality class: Q

Additional information: "Tootja: BILSTEIN
SKODA/VW
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
SKODA/VW
(kvaliteediklass: Q)"

• Suspension: for vehicles with standard suspension
• not for vehicle type: Scout
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Vehicle Equipment: for vehicles without leveling control
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: BI 19-151069
• Quality class: Q

Lisainfo: "Tootja: BILSTEIN
SKODA/VW
(kvaliteediklass: Q)"

• Housing Diameter [mm]: 55
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• General Information: gas-filled shock absorber; front
• Manufacturer: BORSEHUNG

• Suspension: for vehicles with standard suspension
• not for vehicle type: Scout
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Plate, Top pin
• Suspension Strut Outer Diameter [mm]: 55
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: BI 22-151056

Additional information: "Tootja: BILSTEINVW PASSAT 05->(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEINVW PASSAT 05->(kvaliteediklass: Q)"

• Suspension: for vehicles with sports suspension
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Bottom Plate, Top pin
• Suspension Strut Outer Diameter [mm]: 55
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: BI 22-151070

Additional information: "Tootja: BILSTEIN
VW PASSAT 05-
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
VW PASSAT 05-
(kvaliteediklass: Q)"

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Weight [kg]: 4.1
• Packaging length [cm]: 22
• Packaging width [cm]: 22
• Packaging height [cm]: 41
• Manufacturer: FEBEST

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Clamp
• Shock Absorber System: Twin-Tube
• Suspension Strut Outer Diameter [mm]: 55
• Piston Rod Diameter [mm]: 25
• Manufacturer: KYB
• Name: KY 325700

Suspension: for vehicles without bad road version, for vehicles without sports suspension, for vehicles without increased ground clearance Technical Information: Please refer to the technical drawing in "Documents"

• Suspension: for vehicles with sports suspension
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Absorber does not carry a spring
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Vehicle Equipment: for vehicles without leveling control
• Shock Absorber System: Monotube
• Manufacturer: BILSTEIN
• Name: BI 24-178006
• Quality class: Q

Additional information: "Tootja: BILSTEIN
AUDI/SEAT/VW
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
AUDI/SEAT/VW
(kvaliteediklass: Q)"

• Suspension: for vehicles with standard suspension
• not for vehicle type: Scout
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Suspension Strut Outer Diameter [mm]: 55
• Shock Absorber System: Single Tube Upside Down
• Manufacturer: BILSTEIN
• Name: BI 35-122074
• Quality class: Q

Additional information: "Tootja: BILSTEIN
PASSAT VI SDN/KOMBI
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
PASSAT VI SDN/KOMBI
(kvaliteediklass: Q)"

• Suspension: for vehicles with sports suspension
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Suspension Strut Outer Diameter [mm]: 55
• Shock Absorber System: Single Tube Upside Down
• Manufacturer: BILSTEIN

Additional information: "Tootja: BILSTEIN
PASSAT VI SDN/KOMBI
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
PASSAT VI SDN/KOMBI
(kvaliteediklass: Q)"