• Engine Code: BKD
• Operating Mode: Pneumatic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Manufacturer: JP GROUP
• Lisainfo: EGR Valve
• Additional information: EGR Valve

• Engine Code: BKD
• Material: Stainless Steel
• Name: TIHEND, EGR-KLAPP
• Manufacturer: FIS

• Engine Code: BKD
• Construction Year to: 03.2010
• Thickness [mm]: 1
• Width [mm]: 46
• Length [mm]: 76
• Name: TIHEND, EGR-KLAPP
• Manufacturer: AJU

• Engine Code: BKD
• Inner Diameter [mm]: 32
• Name: TIHEND, EGR-KLAPP
• Manufacturer: FIS

• Weight [kg]: 0.01
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Gasket Design: Steel
• Mounting Type: Flange mounting
• Flange Hole Diameter [mm]: 25
• Number of flange connections: 2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: CFFB, CLJA
• Charge Type: Exhaust Turbocharger
• Material: Stainless Steel
• Fitting Position: Exhaust Turbocharger
• Manufacturer: FISCHER
• Name: FI 411560

• Engine Code: BKD
• Inner Diameter [mm]: 32
• Manufacturer: ELRING
• Lisainfo: 729.970 ELR
• Additional information: 729.970 ELR

• Engine Code: CLJA, CFFB
• Inner Diameter [mm]: 25
• Weight [kg]: 0.004
• Name: Tihend, EGR-klapp
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: BKD
• Construction Year to: 03.2010
• Thickness [mm]: 0.4
• Inner Diameter [mm]: 46
• Outer Diameter [mm]: 76
• Name: TIHEND, EGR-KLAPP
• Manufacturer: AJU
• Additional information: AJU01112700
• Lisainfo: AJU01112700

• Engine Code: CLJA, CFFB
• Manufacturer: JP GROUP
• Lisainfo: Gasket, EGR valve pipe
• Additional information: Gasket, EGR valve pipe

• Required quantity: 4
• Engine Code: CFFB, CLJA
• Material: Stainless Steel
• Name: TIHEND, EGR-KLAPP
• Manufacturer: FIS

• Engine Code: BKD
• Inner Diameter [mm]: 32

• Engine Code: CFFB, CLJA
• Block Separation:
• Outer Diameter [mm]: 75.5
• Manufacturer: METZGER

• Engine Code: BKD
• Fitting Position: Intake Manifold
• Inner Diameter [mm]: 60
• Outer Diameter [mm]: 66
• Thickness [mm]: 3
• Material: FPM (fluoride rubber)
• Shape: O-Ring
• Manufacturer: ELRING

• Mounting Type: Flange mounting
• Flange Hole Diameter [mm]: 24.8
• Gasket Design: Steel
• Material: Stainless Steel
• Number of flange connections: 2
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: CFFB
• Fitting Position: behind exhaust turbocharger
• Material: Stainless Steel
• Length [mm]: 64
• Name: TIHEND, EGR-KLAPP
• Manufacturer: FIS

• Engine Code: CFFB, CLJA
• Required quantity: 4
• Manufacturer: ELRING

• Engine Code: CFFB
• Fitting Position: behind exhaust turbocharger
• Manufacturer: ELRING

• Engine Code: BKD
• Weight [kg]: 0.007
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: BKD
• Inner Diameter [mm]: 22
• Manufacturer: ELRING

• Mounting Type: Flange mounting
• Flange Hole Diameter [mm]: 26.2
• Gasket Design: Steel
• Material: Stainless Steel
• Number of flange connections: 2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: CFFB, CLJA
• Fitting Position: Bypass Flap at EGR cooler
• Number of mounting bores: 6
• Manufacturer: ELRING

• Engine Code: CFFB, CLJA
• Block Separation:
• Inner Diameter [mm]: 24.8
• Manufacturer: METZGER

• Engine Code: CLJA, CFFB
• Construction Year from: 05.2013
• Inner Diameter [mm]: 26.4
• Material: Stainless Steel
• Weight [kg]: 0.004
• Name: Tihend, EGR-klapp
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CFFB, CLJA
• Fitting Position: Throttle Housing
• Thickness [mm]: 4.6
• Inner Diameter [mm]: 55
• Outer Diameter [mm]: 59
• Name: Tihend, EGR-klapp
• Manufacturer: DRM

• Weight [kg]: 0.004
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: CFFB, CLJA
• Plug Type: Blade Terminal Sleeve
• Plug housing design: Plug sleeve housing
• Number of pins: 2
• Manufacturer Restriction: Mercedes-Benz, VAG, Scania
• Socket Width [mm]: 2.8
• Cable Cross Section [mm²]: 0.75
• Protection Type (IP Code): IP X7
• Cable Length [mm]: 500
• for article number: 82710249, 82710380, 82710396
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals, with hose
• Supplementary Article/Info 2: with pipe
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, keskne elektrissteem
• Manufacturer: HBE
• Lisainfo: 50390266
• Additional information: 50390266

• Engine Code: BKD
• Fitting Position: Pipe at manifold
• Manufacturer: WAHLER

• Voltage [V]: 12
• Number of pins: 2
• Operating Mode: Electric
• Valve type: Solenoid Valve
• for OE number: 1J0906283B, 1J0906283C, 1K0906283A, 1K0906283
• Weight [kg]: 1.1
• Packaging length [cm]: 21
• Packaging width [cm]: 21
• Packaging height [cm]: 17
• Manufacturer: AKSDASIS

Manufacturer: MAGNETI MARELLI

• Operating Mode: Pneumatic
• Fabrication Number: EGR-SK-000
• Manufacturer: NTY
• Name: NTY EGR-SK-000

• Supplementary Article/Supplementary Info: with seal
• Operating Mode: Pneumatic
• Manufacturer: KAMOKA

• Supplementary Article/Supplementary Info: without EGR cooler, with gaskets/seals
• Operating Mode: Pneumatic
• Fabrication Number: EGR-CH-011

• Engine Code: BKD
• Valve type: Diaphragm Valve
• Operating Mode: Pneumatic
• Supplementary Article/Supplementary Info: with seal
• Name: EGR-KLAPP
• Manufacturer: MAX

• Operating Mode: Pneumatic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Packaging length [cm]: 13
• Packaging width [cm]: 11
• Packaging height [cm]: 9
• Weight [kg]: 0.442
• Valve type: Diaphragm Valve
• Manufacturer: AKSDASIS

• Engine Code: BKD
• Operating Mode: Pneumatic
• for OE number: 038131501AN
• Supplementary Article/Supplementary Info: with gaskets/seals
• Name: EGR-KLAPP
• Manufacturer: NRF

• Supplementary Article/Supplementary Info: with gaskets/seals
• Operating Mode: Pneumatic
• Weight [kg]: 0.5
• Required quantity: 1
• General Information: EGR Valve
• Manufacturer: VIKA

• Engine Code: BKD
• Operating Mode: Pneumatic
• Always compare old and new part (in particular OE No.):
• Weight [kg]: 0.58
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 14SKV019

• Engine Code: BKD
• Operating Mode: Pneumatic
• Supplementary Article/Supplementary Info: with seal
• Name: DRM 211104
• Manufacturer: DR.MOTOR AUTOMOTIVE

• Engine Code: BKD
• Operating Mode: Pneumatic
• Valve type: Diaphragm Valve
• Supplementary Article/Supplementary Info: with seal
• Quality class: PJ
• Name: Exhaust gas recirculation valve

• Engine Code: CFFB, CLJA
• Block Separation:
• Weight [kg]: 0.22
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 14SKV709

• Operating Mode: Pneumatic
• New Part:
• Used part return not required:
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of Gaskets/Seals/Seal Rings: 3
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Weight [kg]: 0.22
• Warranty: 3 years warranty
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Engine Code: BKD
• New part without deposit:
• Weight [kg]: 0.5
• Required quantity: 1
• Operating Mode: Pneumatic
• Valve type: Diaphragm Valve
• Alternatively:
• Supplementary Article/Supplementary Info: with gaskets/seals
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: BKD
• Operating Mode: Pneumatic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Manufacturer: WAHLER ZAWORY EGR

• Engine Code: CFFB, CLJA
• Block Separation:
• Supplementary Article/Supplementary Info: without gaskets/seals
• Article number of recommended accessories: 0899162
• Fitting Position: after EGR cooler, Engine Block
• Manufacturer: METZGER

• Engine Code: CFFB, CLJA
• Block Separation:
• Supplementary Article/Supplementary Info: without gaskets/seals
• Article number of recommended accessories: 0899162, 0899165
• Fitting Position: after EGR cooler, Lower
• Manufacturer: METZGER

• Engine Code: BKD
• Supplementary Article/Supplementary Info: with gaskets/seals
• Name: EGR-klapp
• Manufacturer: NIS
• Lisainfo: JEEP PATRIOT(MK) (07-) 2.0 CRDi
• Additional information: JEEP PATRIOT(MK) (07-) 2.0 CRDi

Technical Information: FIRST FIT - Includes gaskets and O-rings when needed

• Name: EGR-KLAPP
• Manufacturer: MAG

• Engine Code: BKD
• Operating Mode: Pneumatic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Net weight [kg]: 0.48
• Name: EGR-KLAPP
• Manufacturer: ELS

• Engine Code: BKD
• Operating Mode: Pneumatic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Manufacturer: WAHLER

• Name: Toruhendus, EGR-klapp
• Manufacturer: MD

• Engine Code: BKD
• Supplementary Article/Supplementary Info: with seal
• Operating Mode: Pneumatic
• Quality: OE EQUIVALENT
• Name: EGR-klapp
• Manufacturer: MD

• Engine Code: BKD
• Manufacturer: DELPHI
• Name: DE EG10421-12B1

• Engine Code: BKD
• Name: EP 1.963.029
• Manufacturer: EPS

• Engine Code: BKD
• Number of connectors: 1
• Operating Mode: Pneumatic
• Weight [kg]: 0.5
• Supplementary Article/Supplementary Info: with gaskets/seals
• Name: EGR-KLAPP
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• New Part:
• Engine Code: BKD
• Housing Type: Aluminium Housing
• Operating Mode: Pneumatic
• Cooling Type: Air cooled
• Supplementary Article/Supplementary Info: with gaskets/seals
• Name: EGR-KLAPP
• Manufacturer: TRI

• Engine Code: BKD
• Supplementary Article/Supplementary Info: with gaskets/seals
• Operating Mode: Vacuum-controlled
• Assy./disassy. by qualified personnel required!:
• Name: HE 6NU010171301
• Manufacturer: HELLA

• Engine Code: BKD
• Operating Mode: Pneumatic
• Supplementary Article/Supplementary Info: with seal
• Warranty: 5 years warranty
• Manufacturer: HITACHI

• Engine Code: BKD
• Operating Mode: Pneumatic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Version: AM
• Manufacturer: METZGER

• Engine Code: BKD
• Valve type: Diaphragm Valve
• Operating Mode: Pneumatic
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: PIERBURG

• Operating Mode: Electric
• Packaging length [cm]: 21
• Packaging width [cm]: 21
• Packaging height [cm]: 17
• Weight [kg]: 1.36
• Manufacturer: AKSDASIS

• Operating Mode: Electric
• Supplementary Article/Supplementary Info: with EGR cooler, with gaskets/seals
• Cooling Type: Water-cooled
• New Part:
• Used part return not required:
• Manufacturer: ABAKUS DEPO/LORO
• Additional information: 121-01-087 ABAK
• Lisainfo: 121-01-087 ABAK

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Engine Code: CFFB, CLJA
• Supplementary Article/Supplementary Info: with EGR cooler
• Name: EGR-klapp
• Manufacturer: NIS

Technical Information: FIRST FIT - Includes gaskets and O-rings when needed

• Engine Code: CFFB, CLJA
• Operating Mode: Electric
• Supplementary Article/Supplementary Info: with EGR cooler
• Manufacturer: DR MOTOR PRZEWODY PRZELEWOWE
• Name: DRM 211101S

• Engine Code: CFFB, CLJA
• Operating Mode: Electric
• Supplementary Article/Supplementary Info: with gaskets/seals, with EGR cooler
• Number of connectors: 5
• Cooling Type: Water-cooled
• Net weight [kg]: 2.26
• Name: EGR-KLAPP
• Manufacturer: ELS

• Engine Code: CFFB, CLJA
• Supplementary Article/Supplementary Info: with EGR cooler, with gaskets/seals
• Connector Shape: oval
• Number of pins: 5
• Operating Mode: Electric
• Name: EGR-MOODUL
• Manufacturer: NRF

• Engine Code: CFFB, CLJA
• Operating Mode: Electric
• Supplementary Article/Supplementary Info: with gaskets/seals
• Lisainfo: EGR Valve
• Additional information: EGR Valve

• Engine Code: CFFB, CLJA
• Operating Mode: Electric
• Supplementary Article/Supplementary Info: with EGR cooler, with gaskets/seals
• Quality class: PJ
• Name: Exhaust gas recirculation valve

• Engine Code: CFFB, CLJA
• New part without deposit:
• Operating Mode: Electric
• Supplementary Article/Supplementary Info: with gaskets/seals, with EGR cooler
• Number of pins: 5
• Cooling Type: Water-cooled
• Connector Shape: oval
• New Part:
• See accessories list for additionally required parts:
• Recommended additional repairs: Mounting Kit
• Article number of recommended accessories: V10-63-9083
• Weight [kg]: 3.2
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: CFFB, CLJA
• Operating Mode: Electric
• Supplementary Article/Supplementary Info: with seal, with EGR cooler
• Additionally required articles (article numbers): 138467
• Warranty: 5 years warranty
• Manufacturer: HUCO
• Name: HU 138469

• Engine Code: CFFB, CLJA
• Voltage [V]: 12
• Manufacturer: DELPHI
• Name: DE EG10472-12B1

• Engine Code: BKD
• Inner Diameter [mm]: 61
• Thickness [mm]: 3
• Material: NBR (nitrile butadiene rubber)
• Shape: O-Ring
• Fitting Position: EGR valve at manifold

• Engine Code: BKD
• Inner Diameter [mm]: 61
• Thickness [mm]: 3
• Material: NBR (nitrile butadiene rubber)
• Shape: O-Ring
• Fitting Position: EGR valve at manifold
• Alternatively: