Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- General Information: Round head screw
- Manufacturer: BORSEHUNG
- Outer Diameter [mm]: 26
-
Name: Sulgurkate,
nukkvoll - Manufacturer: ELR
- Fitting Position: frontal sided
- Engine Code: CDAB
- Height [mm]: 10
- Outer Diameter [mm]: 47
- Inner Diameter [mm]: 32
-
Material: PTFE
(polytetrafluoroethylene) - for OE number: MN980030
- Rotation Direction: Clockwise rotation
- Manufacturer: FAI
- Thickness [mm]: 8.5
- Width [mm]: 26
- Length [mm]: 26
-
Name: Sulgurkate,
nukkvoll - Manufacturer: AJU
- Fitting Position: Intake Side
-
Name: Juhtklapp,
nukkvolli asend - Manufacturer: DRM
- Outer Diameter [mm]: 88
- Inner Diameter [mm]: 52
- Thickness [mm]: 28
- Manufacturer: BGA
- Additional information: BGAOCV0116
- Lisainfo: BGAOCV0116
- Engine Code: CDAB
- Operating Mode: Electric
- Voltage [V]: 12
-
Name: Tsentraalmagnet,
nukkvolliasend - Manufacturer: MAX
-
Operating Mode: Electric-
hydraulic -
Fabrication Number: EFR-
AU- 006 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- General Information: Oil control valve for VVT
- Manufacturer: VIKA
- for OE number: 03G 105 021 C
- Thickness [mm]: 10
- Inner Diameter [mm]: 35
- Fitting Position: frontal sided
- Outer Diameter [mm]: 48
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: CDAB
- Manufacturer: MAGNETI MARELLI
-
Fitting Position: Exhaust Side,
Intake Side - Operating Mode: electronically controlled
- Number of pins: 2
- Guarantee: 3 years guarantee
- Always compare old and new part (in particular OE No.):
- Weight [kg]: 0.31
- Manufacturer: SKV GERMANY
- Operating Mode: Electric
- Number of pins: 2
- Connector Shape: oval
-
Housing material: GRP
(Glass fibre Reinforced Plastic), Polyamid 6.6 - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Cylinder Head,
lateral installation - Material: Aluminium
- Supplementary Article/Info 2: with seal ring
- Consult accessories list for recommended additional repairs:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Valve Type: Solenoid Valve
- Number of pins: 2
- Manufacturer: DR MOTOR
- Name: DRM 02216
- Width [mm]: 14.2
- Thickness [mm]: 28
- Inner Diameter [mm]: 52
- Outer Diameter [mm]: 88
- Number of connectors: 2
- Weight [kg]: 0.3
-
Name: TSENTRAALMAGNET,
NUKKVOLLIASEND - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Operating Mode: Hydraulic
- Valve Type: Control Valve
- Fitting Position: Intake Side
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Engine Code: CDAB
-
Name: Laagripukk,
nukkvoll - Manufacturer: FRE
- General Information: Camshaft bearing seat
- Manufacturer: VIKA
- Additional information: 11031425201
- Lisainfo: 11031425201
- General Information: Oil pressure valve
- Manufacturer: VIKA
- Number of connectors: 1
- Valve Type: Control Valve
- Weight [kg]: 0.071
- for OE number: 06H 109 257 C
-
Name: TSENTRAALKLAPP,
NUKKVOLLIASEND - Manufacturer: FEB
- Lisainfo: 40201 FEBI
- Additional information: 40201 FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- General Information: Magnet for VVT
- Manufacturer: VIKA
- for OE number: 06H 109 257 C
- Guarantee: 3 years guarantee
- Manufacturer: AT AUTOTEILE GERMANY
General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.
- Operating Mode: Hydraulic
- Fitting Position: Intake Side
- Manufacturer: HEPU
-
Fitting Position: Cylinder Head,
Inlet - Plug Type: Female
- Material: Metal
- Length [mm]: 44
- Width [mm]: 30
- Height [mm]: 30
- Manufacturer: GATES
- Engine Code: CDAB
- Manufacturer: MAGNETI MARELLI
- Observe the vehicle manufacturer specifications:
-
Supplementary Article/Info 2: Control Unit/
Software must be trained/ updated - Always compare old and new part (in particular OE No.):
- Manufacturer: VDO
- Valve Type: Solenoid Valve
- Outer Diameter [mm]: 88
- Version: IAM
- Manufacturer: METZGER
- Engine Code: CDAB
- Operating Mode: Electric
- Voltage [V]: 12
-
Name: TSENTRAALMAGNET,
NUKKVOLLIASEND - Manufacturer: PIE
- Operating Mode: Hydraulic
- Valve Type: Control Valve
- Fitting Position: Intake Side
- Manufacturer: METZGER
- Fitting Position: Cylinder Head
- Weight [kg]: 0.64
-
for OE number: 06H103144J,
06H103144K -
for article number: 120-
09- 056 - Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Fitting Position: Lower
- Engine Code: CDAB
-
Name: Juhtklapp,
nukkvolli asend - Manufacturer: MVE
- Always compare old and new part (in particular OE No.):
-
Name: Laagripukk,
nukkvoll - Manufacturer: DRM
Brief Information: Always compare old and new part (in particular OE No.)
- Supplementary Article/Supplementary Info: without accessories
-
Fitting Position: Cylinder Head,
lateral installation - Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Supplementary Article/Supplementary Info: without accessories
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: CDAB
- Supplementary Article/Info 3: with bearing bracket
- Name: Nukkvoll
- Manufacturer: KS
- Weight [kg]: 0.64
- Supplementary Article/Info 2: with seal ring
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Material: Aluminium
- Supplementary Article/Info 2: with seal ring
- Manufacturer: METZGER
- Weight [kg]: 1.049
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Supplementary Article/Info 2: with valves
- Observe service information:
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Intake Side
- Manufacturer: JPN
- Engine Code: CDAB
- Fitting Position: Exhaust Side
- Material: Cast Iron
- Manufacturer: FEDERAL MOGUL
- Fitting Position: Intake Side
- Weight [kg]: 2.441
- for OE number: 06H 109 021 J
- Manufacturer: FEBI BILSTEIN
- Lisainfo: 175101 FEBI
- Additional information: 175101 FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Exhaust Side
- General Information: Camshaft; exhaust; EA888 GEN2; 1.8T
- Manufacturer: BORSEHUNG
- Engine Code: CDAB
-
Installatsiooni pool: Väljalaskepool,
Sisselaskepool - Vedavad seadmed: Balansiirvõll
- Manufacturer: KOLBENSCHMIDT
- Engine Code: CDAB
- Fitting Position: Exhaust Side
- Name: NUKKVOLL
- Manufacturer: KS
- Fitting Position: Intake Side
- General Information: Camshaft; intake; EA888 GEN2; 2.0T
- Manufacturer: BORSEHUNG
- Fitting Position: Intake Side
- General Information: Camshaft; intake; EA888 GEN2; 1.8T
- Manufacturer: BORSEHUNG
- Engine Code: CDAB
- Fitting Position: Intake Side
- Name: NUKKVOLL
- Manufacturer: KS
- Engine Code: CDAB
- Fitting Position: Intake Side
- Material: Steel
- Manufacturer: FEDERAL MOGUL
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks