• Construction Year to: 05.2012
• Fitting Position: Rear Axle Right, Wheel Side
• Length [mm]: 95.5
• Thread Size: M16X1,5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Sealing Ring Diameter [mm]: 59.5
• Technical Information Number: Groove Type Inner
• Manufacturer: GSP

Transmission Type: 6-Speed Automatic Transmission, 6-Speed Manual Transmission

• Fabrication Number: NPW-VW-005
• Internal Toothing differential side, conn. to transmission: 33
• Manufacturer: NTY
• Name: NTY NPW-VW-005

Fitting Position: Front Axle Left, Front Axle Right, transmission sided, Rear Axle Left, Rear Axle Right Transmission Type: 6-Speed Manual Transmission, 5-Speed Manual Transmission, Manual Transmission, 4-Speed Automatic Transmission, Automatic Transmission, 7-Speed Dual-Clutch Transmission, Dual-Clutch Transmission

• Fitting Position: Wheel Side
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 59.5
• Fabrication Number: NPZ-SK-009
• Manufacturer: NTY
• Name: NTY NPZ-SK-009

• Fitting Position: Rear Axle, Wheel Side
• External Toothing wheel side: 36
• Internal Toothing wheel side: 33
• Sealing Ring Diameter [mm]: 59
• Outer Diameter [mm]: 82
• Joint Type: CV Joint
• Fabrication Number: NPZ-VW-043
• Manufacturer: NTY

• Fitting Position: transmission sided
• Joint Type: Flexible Joint Disc
• Length [mm]: 34
• Internal Toothing differential side, conn. to transmission: 33
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Construction Year to: 05.2012
• Fitting Position: Wheel Side
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Thread Size: M16X1,5
• Length [mm]: 96
• Sealing Ring Diameter [mm]: 59.5
• Lubrication: with grease lubrication
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Supplementary Article/Info 2: with bellow
• Assy./disassy. by qualified personnel required!:
• Name: AB 141-04-001
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Wheel Side
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Thread Size: M16X1,5
• Length [mm]: 106
• Sealing Ring Diameter [mm]: 59.5
• Lubrication: with grease lubrication
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Supplementary Article/Info 2: with bellow
• Assy./disassy. by qualified personnel required!:
• Name: AB 141-04-008
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fabrication Number: NPW-VW-002
• Internal Toothing differential side, conn. to transmission: 33
• Manufacturer: NTY
• Name: NTY NPW-VW-002

Fitting Position: Front Axle Left, Front Axle Right, transmission sided, Rear Axle Left, Rear Axle Right Transmission Type: 6-Speed Manual Transmission, 5-Speed Manual Transmission, Manual Transmission, Automatic Transmission, 6-Speed Automatic Transmission, 7-Speed Dual-Clutch Transmission, Dual-Clutch Transmission

• Internal Toothing wheel side: 28
• Internal Toothing differential side, conn. to transmission: 28
• Diameter 1 [mm]: 108
• Outer Diameter 2 [mm]: 108
• Manufacturer: BGA

Fitting Position: transmission sided, Front Axle Left, Front Axle Right

• Internal Toothing differential side, conn. to transmission: 33
• Length [mm]: 32
• Diameter 1 [mm]: 100
• Manufacturer: BGA

Fitting Position: transmission sided, Front Axle Left, Front Axle Right

• Fitting Position: Wheel Side
• Joint Type: CV Joint
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Sealing Ring Diameter [mm]: 59
• Diameter 1 [mm]: 22
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: transmission sided
• Outer Diameter [mm]: 100
• Internal Toothing differential side, conn. to conn. shaft: 33
• Manufacturer: LPR

• Fitting Position: Wheel Side
• Joint Type: CV Joint
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 59
• Diameter 1 [mm]: 28
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY
• Additional information: 7274 KAMOKA
• Lisainfo: 7274 KAMOKA

• Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
• Length [mm]: 106
• Thread Size: M16X1,5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 59.5
• Technical Information Number: Groove Type Inner
• Manufacturer: GSP

Transmission Type: 6-Speed Manual Transmission, 6-Speed Automatic Transmission

• Fitting Position: Wheel Side
• Length [mm]: 106
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 59.5
• Manufacturer: DENCKERMANN PRZEGUBY POLOSI

• Fitting Position: Front Axle, transmission sided
• Length [mm]: 34
• Internal Toothing differential side, conn. to conn. shaft: 33
• Outer Diameter [mm]: 99.9
• Joint Type: Flexible Joint Disc
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MAX

• Length [mm]: 32
• Internal Toothing differential side, conn. to transmission: 28
• for OE number: 7H0498103
• Manufacturer: GSP

Fitting Position: Front Axle Left, Front Axle Right, transmission sided Transmission Type: 6-Speed Automatic Transmission, 6-Speed Manual Transmission

• Fitting Position: Front Axle, Wheel Side
• Joint Type: CV Joint
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 59.5
• Outer Diameter [mm]: 98
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MAX

• Length [mm]: 34
• Internal Toothing differential side, conn. to transmission: 33
• for OE number: 377498103E
• Supplementary Article/Info 2: with bolts/screws, with lock tab
• Manufacturer: GSP

Fitting Position: Rear Axle Left, Rear Axle Right, transmission sided Transmission Type: 6-Speed Automatic Transmission, 6-Speed Manual Transmission

• Length [mm]: 34
• Bore Diameter [mm]: 8.2
• Internal Toothing differential side, conn. to conn. shaft: 33
• Number of bores: 6
• Bolt Hole Circle Ø [mm]: 86
• Joint Diameter [mm]: 100
• Manufacturer: JPN

Fitting Position: transmission sided, Rear Axle Left, Rear Axle Right

• Fitting Position: Wheel Side, Front Axle
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Outer Diameter 1 [mm]: 98
• Outer Diameter 2 [mm]: 59.6
• Manufacturer: JPN

• Fabrication Number: NPW-VW-013
• Internal Toothing differential side, conn. to transmission: 28
• Manufacturer: NTY
• Name: NTY NPW-VW-013

Fitting Position: Front Axle Left, Front Axle Right, transmission sided, Rear Axle Left, Rear Axle Right Transmission Type: 7-Speed Dual-Clutch Transmission, 6-Speed Manual Transmission, Manual Transmission, Dual-Clutch Transmission, Automatic Transmission, 5-Speed Manual Transmission, 6-Speed Dual-Clutch Transmission

• Length [mm]: 32
• Internal Toothing differential side, conn. to transmission: 28
• for OE number: 1K0407331
• Manufacturer: GSP

Fitting Position: Front Axle Left, Front Axle Right, transmission sided Transmission Type: 6-Speed Automatic Transmission, 6-Speed Manual Transmission

• Construction Year to: 05.2012
• Fitting Position: Rear Axle Right, Wheel Side
• Pikkus (mm): 96
• Keermemõõt: M16X1,5
• Välishambumine ratta pool: 36
• Sisehambumus rattapool: 30
• Rõngastihendi läbimõõt (mm): 59,5
• Manufacturer: DRIVE

Transmission Type: 6-Speed Automatic Transmission, 6-Speed Manual Transmission

• Fitting Position: Rear Axle Left, Rear Axle Right
• Fabrication Number: NPZ-VW-047
• Length [mm]: 80
• External Toothing differential side: 36
• Internal Toothing differential side, conn. to conn. shaft: 33
• Sealing Ring Diameter [mm]: 59.5
• Manufacturer: NTY

• Fitting Position: transmission sided
• Inner Diameter [mm]: 33
• General Information: Inner joint; Inner tooth33mm
• Manufacturer: VIKA

• Fitting Position: Wheel Side, Front Axle
• Engine Code: CDAB
• Thread Size: M16x1.5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 59.5
• Outer Diameter [mm]: 98
• Joint Type: CV Joint
• Name: Outer CV-joint
• Quality class: PJ

Transmission Type: 6-Speed Manual Transmission, 6-Speed Automatic Transmission Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Fitting Position: Wheel Side
• Välishambumine ratta pool: 36
• Sisehambumus rattapool: 27
• Rõngastihendi läbimõõt (mm): 59,5
• Välisläbimõõt [mm]: 98
• Name: IBS 01K532
• Manufacturer: SAMKO

• Fitting Position: Front Axle, transmission sided
• Internal Toothing differential side, conn. to conn. shaft: 28
• Outer Diameter [mm]: 108
• Joint Type: Flexible Joint Disc
• Length [mm]: 64
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MAX

• Fitting Position: Front Axle, Wheel Side
• Thread Size: M16x1.5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 59.5
• Outer Diameter [mm]: 97.9
• Bellows Material: Rubber
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MEP
• Additional information: 15-1463MET
• Lisainfo: 15-1463MET

• Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
• Pikkus (mm): 106
• Keermemõõt: M16X1,5
• Välishambumine ratta pool: 36
• Sisehambumus rattapool: 27
• Rõngastihendi läbimõõt (mm): 59,5
• Manufacturer: DRIVE

Transmission Type: 6-Speed Manual Transmission, 6-Speed Automatic Transmission

• Fitting Position: Front Axle, Wheel Side
• Joint Type: CV Joint
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 59.5
• Outer Diameter [mm]: 98
• Bellows Material: Thermoplast
• SVHC: No SVHC present!
• Name: Liigendlaager, veovoll
• Manufacturer: FAG

• Thread Size: M20x1,5
• Bellows Material: Thermoplast
• Drive Shaft: without ABS ring
• Manufacturer: VAICO

Fitting Position: Front Axle Left, Front Axle Right, Wheel Side, Front Axle General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle Right, Wheel Side, Rear Axle Left
• Construction Year from: 06.2012
• Block Separation:
• Length [mm]: 79
• External Toothing differential side: 36
• Internal Toothing differential side, conn. to transmission: 33
• Sealing Ring Diameter [mm]: 59.5
• Manufacturer: GSP

Transmission Type: 6-Speed Manual Transmission, 6-Speed Automatic Transmission

• Fitting Position: Front Axle
• Transmission Type: Manual Transmission
• Number of Teeth: 33
• Diameter [mm]: 100
• Internal Toothing wheel side: 33
• Manufacturer: VIKA

General Information: Inner joint; inner; 33teeth; MT; 100mm; Inner tooth33mm

• Fitting Position: Rear Axle, transmission sided
• Joint Type: CV Joint
• Drive Shaft: without ABS ring
• Length [mm]: 34
• Internal Toothing differential side, conn. to conn. shaft: 33
• Outer Diameter [mm]: 100
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MEY

• Fitting Position: Wheel Side
• External Toothing wheel side: 36
• Internal Toothing wheel side: 33
• Sealing Ring Diameter [mm]: 59.5
• Joint Type: CV Joint
• Length [mm]: 79
• Outer Diameter [mm]: 82.4
• Joint Diameter [mm]: 82.4
• Surface: Powder coated
• Name: Liigendlaager, veovoll
• Manufacturer: MEY

• Fitting Position: Front Axle
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• General Information: Outer joint; Inner tooth27mm; outer tooth36mm
• Manufacturer: VIKA

• Fitting Position: Front Axle, Wheel Side
• Internal Toothing wheel side: 27
• External Toothing wheel side: 36
• Joint Type: CV Joint
• Manufacturer: JP GROUP
• Lisainfo: CV joint kit, front, outer
• Additional information: CV joint kit, front, outer

• Inner Diameter 2 [mm]: 100
• External Toothing differential side: 33
• Length 2 [mm]: 34
• Manufacturer: SNR /NTN-SNR/
• Name: SN IJK54.003

Vehicle Identification Number (VIN): [6K-X-081153;], [6K-X-524 122;], [8C-R-000001;], [;8L-X-001445], [8L-X-001446;] Fitting Position: Front Axle Left, transmission sided, Front Axle Right

• Length [mm]: 32
• Internal Toothing differential side, conn. to transmission: 28
• Manufacturer: JPN

Fitting Position: Front Axle Left, Front Axle Right, transmission sided

• Fitting Position: Front Axle
• External Toothing wheel side: 26
• Internal Toothing wheel side: 32
• General Information: Inner joint; Inner tooth32mm; outer tooth26mm
• Manufacturer: VIKA

• Fitting Position: Front Axle
• Length [mm]: 101
• External Toothing wheel side: 36
• Internal Toothing wheel side: 33
• Manufacturer: VIKA

General Information: Outer joint; Inner tooth33mm; outer tooth36mm; total length100.5mm

• Fitting Position: Wheel Side
• Outer Diameter [mm]: 98
• External Toothing wheel side: 36
• Sealing Ring Diameter [mm]: 59.5
• Internal Toothing wheel side: 27
• Manufacturer: LPR

• Fitting Position: transmission sided, Front Axle
• Length [mm]: 34
• Outer Diameter [mm]: 100
• Internal Toothing wheel side: 33
• Weight [kg]: 1.7
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pikkus (mm): 32
• Manufacturer: DRIVE

Fitting Position: Front Axle Left, Front Axle Right, transmission sided Transmission Type: 6-Speed Automatic Transmission, 6-Speed Manual Transmission

• Fitting Position: transmission sided, Rear Axle
• Length [mm]: 34
• Internal Toothing differential side, conn. to conn. shaft: 33
• Outer Diameter [mm]: 99.9
• Number of Holes: 6
• Joint Type: Flexible Joint Disc
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: SKF

• Length [mm]: 32
• Manufacturer: DRIVE

Fitting Position: Front Axle Left, Front Axle Right, transmission sided Transmission Type: 6-Speed Automatic Transmission, 6-Speed Manual Transmission

• Thread Size: M16x1,5
• Sealing Ring Diameter [mm]: 59.5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Version: 6 balls
• Length 2 [mm]: 106
• Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
• Name: SN OJK54.004
• Manufacturer: SNR

• Vehicle Identification Number (VIN): [1M-3-109 001;], [1M-3-109001;], [8L-X-098488;]
• External Toothing differential side: 28
• Inner Diameter 2 [mm]: 108
• Length 2 [mm]: 32
• Manufacturer: SNR /NTN-SNR/

Fitting Position: Front Axle Left, transmission sided, Front Axle Right

• Fitting Position: Wheel Side, Front Axle
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 59
• Outer Diameter [mm]: 97
• Joint Type: CV Joint
• Manufacturer: FEBEST

• Fitting Position: Front Axle Right, Front Axle Left
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• General Information: Outer joint; Inner tooth27mm; outer tooth36mm
• Manufacturer: VIKA

• Model Year from: 2010
• Fitting Position: transmission sided, Front Axle
• Internal Toothing differential side, conn. to transmission: 33
• Sealing Ring Diameter [mm]: 100
• Outer Diameter [mm]: 99
• Joint Type: Flexible Joint Disc
• Manufacturer: FEBEST

• New Part:
• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Joint Type: CV Joint
• Thread Size: M16x1,5
• Bellows Material: Thermoplast
• Supplementary Article/Info 2: with bellow
• Lubrication: with grease lubrication
• Length [mm]: 106
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 59.5
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle, Wheel Side
• External Toothing wheel side: 36
• Internal Toothing wheel side: 33
• Sealing Ring Diameter [mm]: 59
• Outer Diameter [mm]: 82
• Joint Type: CV Joint
• Manufacturer: FEBEST

• Model Year from: 2014
• Fitting Position: Front Axle, Wheel Side
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 59
• Outer Diameter [mm]: 100
• Joint Type: CV Joint
• Manufacturer: FEBEST

• Engine Code: CDAB
• Fitting Position: Wheel Side, Front Axle
• Thread Size: M16x1.5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 59.5
• Outer Diameter [mm]: 98
• Joint Type: CV Joint
• Machined: with groove in inner part (inside)
• Technical Information: Pre-greased joint
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: SKF

Transmission Type: 6-Speed Manual Transmission, 6-Speed Automatic Transmission

• Engine Code: CDAB
• Fitting Position: transmission sided, Front Axle
• Length [mm]: 64.1
• Internal Toothing differential side, conn. to conn. shaft: 28
• Outer Diameter [mm]: 108
• Joint Type: Flexible Joint Disc
• Machined: with groove in inner part (inside)
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: SKF

Transmission Type: 6-Speed Manual Transmission, 6-Speed Automatic Transmission

• Joint Type: Flexible Joint Disc
• Internal Toothing differential side, conn. to conn. shaft: 33
• Machined: without groove in internal component
• Joint Diameter [mm]: 100
• Length [mm]: 34
• Supplementary Article/Info 2: with top
• Bore Diameter [mm]: 8
• Number of bores: 6
• Bolt Hole Circle Ø [mm]: 86
• Bellows Material: NBR (nitrile butadiene rubber)
• New Part:
• Supplementary Article/Supplementary Info: with grease
• Name: Liigendlaager, veovoll
• Manufacturer: GKN

Fitting Position: transmission sided, Rear Axle Left, Rear Axle Right General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.

• Fitting Position: Front Axle, transmission sided
• Internal Toothing differential side, conn. to transmission: 28
• Sealing Ring Diameter [mm]: 108
• Outer Diameter [mm]: 107
• Joint Type: Flexible Joint Disc
• Manufacturer: FEBEST

• Fitting Position: Wheel Side, Front Axle
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Outer Diameter 1 [mm]: 98
• Outer Diameter 2 [mm]: 59.6
• Weight [kg]: 2.41
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
• Joint Type: CV Joint
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 60
• Machined: with groove in internal component
• Joint Diameter [mm]: 98
• Length [mm]: 100
• Thread Size: M16x1.5x77
• Bellows Material: TPE (thermoplastic elastomer)
• New Part:
• Supplementary Article/Info 2: with screw
• Supplementary Article/Supplementary Info: with grease
• Name: Liigendlaager, veovoll
• Manufacturer: GKN

Technical Information: Please observe the specific technical specifications for the joint. Here, a bending angle greater than 50° is required! General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.

• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Joint Type: CV Joint
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 60
• Machined: with groove in internal component
• Joint Diameter [mm]: 98
• Length [mm]: 106
• Thread Size: M16x1.5
• Bellows Material: TPE (thermoplastic elastomer)
• New Part:
• Supplementary Article/Supplementary Info: with grease
• Name: Liigendlaager, veovoll
• Manufacturer: GKN

Technical Information: Please observe the specific technical specifications for the joint. Here, a bending angle greater than 50° is required! General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.