• Quantity per packing unit: 10
• Charge Type: Exhaust Turbocharger
• Thickness [mm]: 3.5
• Sealing Ring Diameter [mm]: 45.3
• Material: FPM (fluoride rubber)
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Charge Type: Exhaust Turbocharger
• Thickness [mm]: 3
• Width [mm]: 57
• Manufacturer: AJUSA

• Fabrication Number: GPP-VW-113
• Manufacturer: NTY

• for OE number: 1K0 145 838 AH
• Manufacturer: KAMOKA

• Materjal: kumm koos koekihiga
• Seerianumber: GPP-VW-014
• Manufacturer: NTY

• Fabrication Number: GPP-VW-071
• Manufacturer: NTY

• Turbocharger Line: Cold Side, Piping to engine block
• Hose Length [mm]: 150
• Inner Diameter 1 [mm]: 55
• Inner Diameter 2 [mm]: 55
• Manufacturer: DENCKERMANN FILTRY

• for OE number: 1K0145838AH
• Manufacturer: SASIC

• Fitting Position: Left, Upper
• for OE number: 1K0 145 828 T
• Name: Laadimisohu voolik
• Manufacturer: MAX

• Material: Rubber
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO
• Name: AB 053-028-045

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• for OE number: 1K0145838AH
• Name: Laadimisohu voolik
• Manufacturer: MAX

• General Information: Turbo charger air pipe
• Manufacturer: VIKA

• for OE number: 1K0145832AC
• Fitting Position: Charge Air Cooler, Left
• Length [mm]: 346
• Outer Diameter 1 [mm]: 62
• Outer Diameter 2 [mm]: 68
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: MAX

• Turbocharger Line: Turbocharger to piping, Hot Side
• Fitting Position: behind exhaust turbocharger
• Colour: black
• Material: Silicone
• Inner Diameter 1 [mm]: 49
• Inner Diameter 2 [mm]: 48
• Guarantee: 3 years guarantee
• Weight [kg]: 0.16
• Hose Length [mm]: 90
• Suitable for vehicle type: PC (passenger car)
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV ESEN

• Fitting Position: engine sided, Upper Right, Throttle Housing
• Material: Rubber with fabric lining
• Supplementary Article/Info 2: with clamp
• Hose Type: Moulded Hose
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for OE number: 1K0 145 832 AC
• Manufacturer: KAMOKA

• for OE number: 1K0 145 834 AP
• Manufacturer: KAMOKA

• Fitting Position: Charge Air Cooler, Upper Right
• Supplementary Article/Info 2: with clamps
• Manufacturer: NRF

• OE-numbri jaoks: 1K0145832AC
• Hulgaühik: Tükk
• Kaal (g): 530
• Materjali 1. kiht: MVQ (Silikon-Kautæuk)
• Materjali 2. kiht: Aramiid
• Materjali 3. kiht: MVQ (Silikon-Kautæuk)
• Name: Laadimisohu voolik
• Manufacturer: IBR

• General Information: Turbo charger air pipe
• Manufacturer: VIKA

• Length [mm]: 385
• Inner Diameter 1 [mm]: 60
• Inner Diameter 2 [mm]: 55
• Fitting Position: Charge Air Cooler, Outlet
• Supplementary Article/Info 2: with clamps
• Manufacturer: NRF

• Inner Diameter 1 [mm]: 48
• Inner Diameter 2 [mm]: 48
• Fitting Position: Charge Air Cooler, Outlet
• for OE number: 1K0145828T
• Supplementary Article/Info 2: with clamps
• Name: Laadimisohu voolik
• Manufacturer: NRF

• Length [mm]: 346
• for OE number: 1K0145832AC
• Fitting Position: Charge Air Cooler, Left
• Outer Diameter 1 [mm]: 62
• Outer Diameter 2 [mm]: 68
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: BUG

• Fitting Position: Left, Lower
• Lisainfo: Charger Intake Hose
• Additional information: Charger Intake Hose

• for OE number: 5N0145828E
• Material: Silicone
• Weight [g]: 134
• Length [mm]: 103
• Inner Diameter 1 [mm]: 49
• Inner Diameter 2 [mm]: 48
• Name: IM 223735
• Manufacturer: ORIGINAL IMPERIUM

General Information: The installation of this product can be performed only in a workshop environment by trained professionals

• Fitting Position: Outlet
• for OE number: 1K0145828T
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: SAS

• for OE number: 1K0145832AC
• Weight [g]: 391
• Length [mm]: 304
• Inner Diameter 1 [mm]: 60
• Inner Diameter 2 [mm]: 54
• Name: Laadimisohu voolik
• Manufacturer: IMP

General Information: The installation of this product can be performed only in a workshop environment by trained professionals

• Fitting Position: Right
• Length [mm]: 385
• Colour: black
• Material: PE (Polyethylene)
• Inner Diameter 1 [mm]: 55
• Inner Diameter 2 [mm]: 55
• Guarantee: 3 years guarantee
• Weight [kg]: 0.41
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Fitting Position: Charge Air Cooler, Inlet
• for OE number: 1K0145832AC
• Manufacturer: SASIC

• Fitting Position: Charge Air Cooler, Outlet
• for OE number: 1K0145834AP
• Manufacturer: SASIC

• Length [mm]: 385
• for OE number: 1K0145834AP
• Fitting Position: Charge Air Cooler, Right
• Outer Diameter 1 [mm]: 64
• Outer Diameter 2 [mm]: 70
• Manufacturer: BUGIAD

• Fitting Position: Left
• Name: Laadimisohu voolik
• Manufacturer: MEY

Material: Aramid, FKM (fluorocarbon rubber), FVMQ [fluorosilicone rubber)

• Turbocharger Line: Cold Side, Piping to engine block
• Material: PE (Polyethylene)
• Colour: black
• Hose Length [mm]: 150
• Inner Diameter 1 [mm]: 55
• Inner Diameter 2 [mm]: 55
• Observe broschure:
• Name: Laadimisohu voolik
• Manufacturer: GAT

• Fitting Position: Lower Left
• Manufacturer: YSPARTS

• Turbocharger Line: Cold Side, Charge air cooler to piping
• Material: PE (Polyethylene)
• Colour: black
• Hose Length [mm]: 345
• Inner Diameter 1 [mm]: 60
• Inner Diameter 2 [mm]: 55
• Observe broschure:
• Name: Laadimisohu voolik
• Manufacturer: GAT

• Fitting Position: Charge Air Cooler, Outlet
• for OE number: 1K0145834AP
• Name: Laadimisohu voolik
• Manufacturer: MAX

• Turbocharger Line: Hot Side, Turbocharger to piping
• Material: Silicone
• Colour: black
• Hose Length [mm]: 90
• Inner Diameter 1 [mm]: 49
• Inner Diameter 2 [mm]: 48
• Observe broschure:
• Name: Laadimisohu voolik
• Manufacturer: GAT

• for OE number: 1K0145834AP
• Weight [g]: 405
• Length [mm]: 289
• Inner Diameter 1 [mm]: 57
• Inner Diameter 2 [mm]: 54
• Name: IM 221924
• Manufacturer: ORIGINAL IMPERIUM

General Information: The installation of this product can be performed only in a workshop environment by trained professionals

• Fitting Position: Charge Air Cooler, Right
• Supplementary Article/Info 2: with clamp
• Hose Type: Moulded Hose
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Charge Air Cooler, Inlet
• Supplementary Article/Info 2: with clamps
• Name: Laadimisohu voolik
• Manufacturer: NRF

• for OE number: 1K0145838AH
• Name: Laadimisohu voolik
• Manufacturer: MD

• Fitting Position: Right, Lower, Charge Air Cooler
• Material: AEM (Ethylene Acrylate Rubber)
• Name: Laadimisohu voolik
• Manufacturer: MEY

• Fitting Position: Lower Left
• Supplementary Article/Info 2: with hose clip
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Left Front, Lower Left
• Supplementary Article/Info 2: with clamp
• Outer Diameter 1 [mm]: 68
• Outer Diameter 2 [mm]: 62
• Inner Diameter 1 [mm]: 59
• Inner Diameter 2 [mm]: 53
• Guarantee: 3 years guarantee
• Turbocharger Line: Piping to charge air cooler
• Weight [kg]: 0.38
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 24SKV048

• for OE number: 1K0906627B
• Name: Survemuundur,turbokompressor
• Manufacturer: MAX

• Weight [kg]: 0.15
• Weight [g]: 150
• Manufacturer: METALCAUCHO

• Engine Code: CAYC
• only in connection with: 70-41369-00
• Name: Montaa§ikomplekt, kompressor
• Manufacturer: REI

• Voltage [V]: 12
• Number of connectors: 2
• Weight [kg]: 0.189
• Name: Survemuundur,turbokompressor
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Turbocharger Line: Hot Side, Piping to charge air cooler
• Material: PE (Polyethylene)
• Colour: black
• Hose Length [mm]: 310
• Inner Diameter 1 [mm]: 60
• Inner Diameter 2 [mm]: 54
• Observe broschure:
• Name: Laadimisohu voolik
• Manufacturer: GAT

• Supplementary Article/Supplementary Info: with gaskets/seals
• Supplementary Article/Info 2: with bolts/screws
• Manufacturer: ELRING

for OE number: 03L 253 014 F, 03L 253 016 T, 829886-0001, 829886-5001S

• Colour: black
• Inner Diameter 1 [mm]: 54
• Inner Diameter 2 [mm]: 57
• Material: PE (Polyethylene)
• Manufacturer: BORG & BECK

• Fitting Position: Charge Air Cooler, Left, Lower
• Supplementary Article/Info 2: with clamps
• Article number of recommended accessories: 2400581
• Manufacturer: METZGER

• Operating Mode: Electric-pneumatic
• Valve Type: Solenoid Valve
• Voltage [V]: 12
• Number of pins: 2
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• for OE number: 1K0145770N
• Weight [g]: 508
• Name: IM 223863
• Manufacturer: ORIGINAL IMPERIUM

General Information: The installation of this product can be performed only in a workshop environment by trained professionals

• Engine Code: CAYC
• Supplementary Article/Supplementary Info: with gaskets/seals
• for OE number: 03L253016
• Name: MONTAA?IKOMPLEKT,KOMPRESSOR
• Manufacturer: AJU

• Operating Mode: Electric-pneumatic
• Voltage [V]: 12
• Version: IAM
• Manufacturer: METZGER

• for OE number: 1K0906627B
• Name: Survemuundur,turbokompressor
• Manufacturer: MD

• Voltage [V]: 12
• Operating Mode: Electric-pneumatic
• Valve Type: Solenoid Valve
• Number of pins: 2
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Manufacturer: 3RG

• OE-numbri jaoks: 431380055
• Manufacturer: MEAT&DORIA

• for OE number: 431370454
• Name: Turbolaadija, laadija
• Manufacturer: MD

• Charge Type: Exhaust Turbocharger
• Quality: OE Reman
• Guarantee: 2 years guarantee
• Manufacturer Restriction: GARRETT

• Charge Type: Exhaust Turbocharger
• Quality: OE Reman
• Guarantee: 2 years guarantee
• Supplementary Article/Supplementary Info: Incl. Gasket Set
• Manufacturer Restriction: GARRETT

• Charge Type: Exhaust Turbocharger
• Quality: OE Reman
• Guarantee: 2 years guarantee
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Manufacturer Restriction: GARRETT

• Charge Type: Exhaust Turbocharger
• Quality: New
• Guarantee: 2 years guarantee
• Supplementary Article/Supplementary Info: Incl. Gasket Set

• Charge Type: Exhaust Turbocharger
• Quality: New
• Guarantee: 2 years guarantee
• Supplementary Article/Supplementary Info: with fastening/mounting material

• Tootja piirang: Garrett/Honeywell
• Piirangutega toode/piirangu info: koos tihenditega
• Netokaal [kg]: 9,05
• Name: KOMPRESSOR,šLELAADIMINE
• Manufacturer: TMI

Laadimisviis: Heitgaaside turbokompressor, Pneumaatiliselt reguleeritav täiturseade (ajam)

• Laadimisviis: Heitgaaside turbokompressor
• Kvaliteet: OE Remanufactured
• OE-numbri jaoks: 03L253016T
• Hulk: 1
• Vana detaili tagastus vajalik:
• Garantii: 2 aastat garantii
• Komplekteerimisjuhist jälgida:
• Brutokaal [kg]: 9,9
• Netokaal [kg]: 9,1
• Manufacturer: OES PARTS

• Manufacturer Restriction: Garrett/Honeywell
• Supplementary Article/Supplementary Info: with gaskets/seals
• Net weight [kg]: 9.05
• Manufacturer: LUCAS TURBO

Charge Type: Exhaust Turbocharger, Pneumatically controlled actuator

• Engine Code: CAYC
• Charge Type: Exhaust Turbocharger
• Supplementary Article/Supplementary Info: with gaskets/seals
• New Part:
• Weight [kg]: 10
• Packaging length [cm]: 50
• Packaging width [cm]: 31
• Packaging height [cm]: 29
• for OE number: 03L253016, 03L253016T, 03L253016TV, 03L253016TX

• Engine Code: CAYC
• Operating Mode: pneumatic
• Cooling Type: oil-cooled
• Supplementary Article/Info 2: with exhaust manifold
• Supplementary Article/Supplementary Info: with gaskets/seals
• Name: Kompressor,lelaadimine
• Manufacturer: NIS
• Lisainfo: VOLKSWAGEN CADDY IV (SA) (15-) 1.6 TDI
• Additional information: VOLKSWAGEN CADDY IV (SA) (15-) 1.6 TDI

Charge Type: Exhaust Turbocharger, with linear position sensor (LPS) Technical Information: FIRST FIT - Includes gaskets, oil syringe and other parts when needed

• Charge Type: Exhaust Turbocharger
• Supplementary Article/Supplementary Info: Incl. Gasket Set
• Manufacturer: JP GROUP
• Lisainfo: Turbocharger
• Additional information: Turbocharger

• Forward- /Backflow: Return Line
• for OE number: 03L145535D
• Supplementary Article/Info 2: with mounting kit

• Forward- /Backflow: Return Line
• for OE number: 03L145535D
• Alternative Repair Kit: 611-950Z