• Colour Coding: grey
• Number of pins: 2
• Manufacturer: JP GROUP
• Lisainfo: Sender for water temperature gauge, 2 pins
• Additional information: Sender for water temperature gauge, 2 pins

• Fitting Position: Front
• Vehicle Equipment: for vehicles with air conditioning
• Colour: black
• Number of pins: 2
• Lisainfo: Sensor, exterior temperature
• Additional information: Sensor, exterior temperature

• Number of pins: 2
• Connector Shape: D Shape
• Manufacturer: JP GROUP
• Lisainfo: Coolant Temperature Sensor
• Additional information: Coolant Temperature Sensor

• Number of connectors: 2
• Material: Plastic
• Manufacturer: JP GROUP
• Lisainfo: Water level switch, washer
• Additional information: Water level switch, washer

• Number of pins: 2
• Connector Shape: D Shape
• Consult accessories list for recommended additional repairs:
• Name: NIVOOLšLITI, PESUVEEKOGUS
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Weight [kg]: 0.013
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front
• Colour: black
• Vehicle Equipment: for vehicles with air conditioning
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Connector Shape: D Shape
• Fabrication Number: ECT-AU-001
• Manufacturer: NTY
• Name: NTY ECT-AU-001

• Fitting Depth [mm]: 29
• Housing Colour: black
• Manufacturer: KAMOKA

• Colour: black
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 2
• Fabrication Number: ECT-VW-002
• Manufacturer: NTY
• Name: NTY ECT-VW-002

• Number of connectors: 2
• Material: Plastic
• Weight [kg]: 0.01
• Name: ANDUR,PESUVEETASE
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 2
• Connector Shape: rectangular
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: D Shape
• Number of pins: 2
• for OE number: 06A919501
• Supplementary Article/Info 2: with mounting parts
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Weight [g]: 15
• Name: IM 5309
• Manufacturer: ORIGINAL IMPERIUM

• Number of pins: 2
• Weight [kg]: 0.01
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV703
• Manufacturer: ESEN SKV

• Quantity: 1
• Construction Year to: 09.2011
• Construction Year from: 09.2011
• Connector Shape: D Shape, oval
• Supplementary Article/Info 2: with seal ring
• Housing Colour: black
• Colour Coding: green
• Number of pins: 2
• Fitted Diameter [mm]: 9
• Number of mounting bores: 1
• General Information: temperature sensor
• Manufacturer: VIKA

• Number of pins: 2
• Connector Shape: rectangular
• Weight [kg]: 0.007
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 03F 919 501 B
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: TRU

• Thread Size: M20
• Number of pins: 2
• Housing Colour: grey
• Connector Shape: oval
• Manufacturer: ERA

• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Connector Shape: D Shape
• Fabrication Number: ECP-AU-028
• Manufacturer: NTY

• Quantity: 1
• General Information: ambient air temperature sensor
• Manufacturer: BORSEHUNG

• Transmission Type: 5-Speed Manual Transmission
• for PR number: 0EJ
• Number of pins: 3
• Connector Shape: D Shape
• Sensor Type: Inductive Sensor
• Mounting Type: Bolted
• Colour: black
• for OE number: 191919149E
• Manufacturer: DELLO AUTOMEGA

• Number of pins: 2
• Colour Coding: grey
• Supplementary Article/Info 2: with seal ring
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Number of pins: 3
• Weight [kg]: 0.04
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV551
• Manufacturer: ESEN SKV

• for OE number: 6Q0 919 149 A
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Connector Shape: D Shape
• Fabrication Number: ECP-VW-001
• Manufacturer: NTY

Lisainfo: AUDI A2, SEAT CORDOBA, IBIZA IV, SKODA FABIA I, FABIA II, ROOMSTER, VW BORA, GOLF IV, LUPO, POLO 1.0-2.0 99-15 Additional information: AUDI A2, SEAT CORDOBA, IBIZA IV, SKODA FABIA I, FABIA II, ROOMSTER, VW BORA, GOLF IV, LUPO, POLO 1.0-2.0 99-15

• Number of pins: 3
• Name: Andur,vahemaa
• Manufacturer: MAX

• for PR number: 0EM
• Transmission Type: Manual Transmission
• Number of pins: 3
• Connector Shape: D Shape
• Supplementary Article/Supplementary Info: with seal
• Mounting Type: Bolted
• Colour: black
• for OE number: 6Q0919149A
• Manufacturer: DELLO AUTOMEGA

• Sensor Type: NTC Sensor
• Mounting Type: Screw Connection
• Connector Shape: D Shape
• Number of pins: 2
• Socket colour: black
• for OE number: 03F919501A
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Connector Shape: rectangular, angled
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Component Number: G 191, G 192
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: CBZA
• Housing Colour: black
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Number of pins: 2
• Colour: black
• Manufacturer: METZGER

• Vehicle Equipment: for vehicles with start-stop function
• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS12317-12B1

• Sensor Type: Hall Sensor
• Number of pins: 3
• Component Number: 120-04-005
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Transmission Type: Manual Transmission
• Number of pins: 3
• Weight [kg]: 0.03
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV553

• for PR number: 7L6
• Colour: grey
• Sensor Type: Hall Sensor
• Fitting Position: Engine Block
• Number of pins: 3
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Connector Shape: D Shape
• Shape: Off-set
• Number of mounting bores: 1
• Supplementary Article/Info 2: with screw
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Quantity: 1
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Connector Shape: D Shape
• General Information: coolant temperature sensor
• Manufacturer: BORSEHUNG

• Model Year to: 2011
• Voltage [V]: 12
• Vehicle Equipment: for vehicles with air conditioning
• Weight [kg]: 0.02
• Operating Mode: Electric
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV411

• Version: 1
• Connector Shape: D Shape
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: not have
• Thread Size: not have
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Supplementary Article/Info 2: with plug
• Conductor Number: 2
• Name: Kaabli paranduskomplekt, v„listemperatuuri andur
• Manufacturer: ABA

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• for OE number: 03C 906 433 E
• Length [mm]: 69
• Supplementary Article/Info 2: with screw
• Fabrication Number: ECP-AU-011
• Manufacturer: NTY

• Length [mm]: 36
• Width [mm]: 17
• Height [mm]: 13
• Weight [kg]: 0.035
• Vehicle Equipment: for vehicles with air conditioning
• Number of pins: 2
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.011
• for OE number: 03F 919 501 B
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity: 1
• Construction Year from: 05.2011, 05.2013
• Construction Year to: 05.2011, 05.2013
• Sensor Type: Inductive Sensor
• Resistor [Ohm]: 540
• Cable Length [mm]: 1,000
• Number of pins: 3
• General Information: distance sensor
• Manufacturer: VIKA

• Number of connectors: 3
• Weight [kg]: 0.024
• for OE number: 191 919 149 E
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Equipment: for vehicles without start-stop function
• Number of pins: 3
• Weight [kg]: 0.03
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV507

• Engine Code: CBZA
• Vehicle Equipment: for vehicles without start-stop function
• Number of pins: 3
• Name: Andur, v„ntvoll
• Manufacturer: MAX
• Lisainfo: 24-0244
• Additional information: 24-0244

• Transmission Type: Manual Transmission
• for PR number: 0EM
• Sensor Type: Active sensor
• Supplementary Article/Info 2: without cable, with seal ring
• Number of pins: 3
• Name: Andur,kiirus/p””rded
• Manufacturer: MAX

• Number of connectors: 2
• Colour: black
• Weight [kg]: 0.011
• for OE number: 03F 919 501 B
• Manufacturer: SWAG
• Name: SW 30 10 6571

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Equipment: for vehicles with manual transmission
• Number of pins: 3
• Colour: black
• Material: Plastic
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Number of pins: 2
• Connector Shape: D Shape
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Equipment: for vehicles without start-stop function
• Height [mm]: 20
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• for PR number: 0EJ
• Number of pins: 3
• Connector Shape: D Shape
• Supplementary Article/Info 2: without cable
• Name: ANDUR,VAHEMAA
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Colour: black
• Number of pins: 3
• Material: Plastic
• Manufacturer: ERA

• Number of pins: 2
• Housing Colour: grey
• Manufacturer: FAE

• Number of pins: 2
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6
• for OE number: 03F919501B, 04E919501C

• Engine Code: CBZA
• for PR number: 7L3
• Name: ANDUR, VŽNTVOLL
• Manufacturer: EPS

Vehicle Equipment: for vehicles without brake energy recovery, for vehicles without start-stop function

• Vehicle Equipment: for vehicles without start-stop function
• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: grey
• Name: CZUJNIK POO½ENIA WAU KORB. VW GOLF 1,6TDI 09-
• Manufacturer: BRM

• Quantity: 1
• Supplementary Article/Info 2: with screw
• Colour: black
• Length [mm]: 69
• Width [mm]: 31
• Weight [kg]: 0.02
• Required quantity: 1
• Number of connectors: 3
• General Information: impulse sender; crackshaft; black
• Manufacturer: VIKA

• for PR number: OEM
• Number of pins: 3
• Supplementary Article/Supplementary Info: with seal
• Colour: black
• Material: Plastic
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Number of pins: 2
• Colour: black
• Material: Plastic
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Quantity: 1
• Construction Year from: 05.2011, 05.2013
• Construction Year to: 05.2011, 05.2013
• Number of pins: 3
• General Information: distance sensor
• Manufacturer: VIKA

• Vehicle Identification Number (VIN) from: 5J-B3008700, 5J-BD500016, 5J-BK500000
• Number of pins: 2
• Sensor Type: NTC Sensor
• Connector Shape: angled
• Fitting Position: Air duct, to interior blower
• Housing material: GRP (Glass fibre Reinforced Plastic), PA 6 GF 30
• Always compare old and new part (in particular OE No.):
• Vehicle Equipment: for vehicles with air conditioning
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for PR number: 9AK
• Model Year to: 2011
• Voltage [V]: 12
• Resistor [Ohm]: 2,700
• Rated Temperature [°C]: 25
• Number of sensors: 1
• Sensor Type: NTC Sensor
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR,SALONGITEMPERATUUR
• Manufacturer: HEL

Vehicle Equipment: for vehicles with automatic climate control, for vehicles with air conditioning Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Connector Shape: D Shape
• Supplementary Article/Info 2: without cable
• Clamping nut type: Threaded nut
• for OE number: 191 919 149E
• Manufacturer: MEAT&DORIA

• Fitting Position: Footwell
• Number of pins: 2
• Weight [kg]: 0.073
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: CBZA
• Transmission Type: Manual Transmission
• Name: ANDUR,P™™RDED
• Manufacturer: EPS

• for PR number: 7L3
• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: D Shape
• Supplementary Article/Info 2: with screw, without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for PR number: 0EM
• Connector Shape: D Shape
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Name: ANDUR,VAHEMAA
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Thread Size: 9 mm
• Manufacturer: VERNET

• Number of pins: 2
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Vehicle Equipment: for vehicles without start-stop function
• Number of pins: 3
• Manufacturer: DELPHI

• Number of pins: 3
• Fabrication Number: EPO-AU-004
• Manufacturer: NTY
• Name: NTY EPO-AU-004

• Vehicle Equipment: for vehicles without start-stop function
• for PR number: 7L3
• Length [mm]: 69
• Width [mm]: 31
• Number of connectors: 3
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with screw
• Name: ANDUR, VŽNTVOLL
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Equipment: for vehicles without start-stop function
• for OE number: 03C 906 433 E
• Width [mm]: 30
• Height [mm]: 28
• Length [mm]: 80
• Weight [kg]: 0.025
• Number of pins: 3
• Supplementary Article/Info 2: for crankshaft, with screw, without cable
• Required quantity: 1
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 20
• Connector Shape: D Shape
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Equipment: for vehicles without start-stop function
• for PR number: 7L3
• Length [mm]: 69
• Width [mm]: 31
• Number of connectors: 3
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with screw
• Manufacturer: SWAG
• Name: SW 30 93 7317

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CBZA
• for PR number: 7L3
• Vehicle type: Fabia
• Fitting Depth [mm]: 20
• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: with screw
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead, 872-50-4; 1-Methyl-2-pyrrolidone
• Name: Andur, v„ntvoll
• Manufacturer: HEL

Vehicle Equipment: for vehicles without brake energy recovery, for vehicles without start-stop function Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Sensor Type: Hall Sensor
• Connector Shape: D Shape
• Manufacturer: FAE