• Engine Code: BSW
• Operating Mode: Pneumatic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Manufacturer: JP GROUP
• Lisainfo: EGR Valve
• Additional information: EGR Valve

• Material: Stainless Steel
• Name: TIHEND, EGR-KLAPP
• Manufacturer: FIS

• Vehicle Identification Number (VIN) to: 5J-83046501
• Shape: O-Ring, round
• Inner Diameter [mm]: 55
• Outer Diameter [mm]: 61
• Thickness [mm]: 3
• Material: MVQ (silicone rubber)
• Name: TIHEND, EGR-KLAPP
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Identification Number (VIN) to: 5J-83046501
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: BSW, BLS
• Thickness [mm]: 1
• Width [mm]: 46
• Length [mm]: 76
• Name: TIHEND, EGR-KLAPP
• Manufacturer: AJU

• Fitting Position: Lower
• Gasket Design: Fibre Composite
• Chemical Properties: Asbestos Free
• Mounting Type: Flange mounting
• Number of flange connections: 2
• Name: TIHEND, EGR-KLAPP
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: BLS
• Vehicle Identification Number (VIN) to: 5J-83046501
• Shape: round
• Material: Rubber
• Name: Tihend, EGR-klapp
• Manufacturer: MAX
• Lisainfo: 70-0130
• Additional information: 70-0130

• Engine Code: BLS
• Manufacturer: ELRING

• Inner Diameter [mm]: 32
• Name: TIHEND, EGR-KLAPP
• Manufacturer: FIS

• Weight [kg]: 0.01
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY

• Gasket Design: Steel
• Mounting Type: Flange mounting
• Flange Hole Diameter [mm]: 25
• Number of flange connections: 2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Inner Diameter [mm]: 32
• Manufacturer: ELRING
• Lisainfo: 729.970 ELR
• Additional information: 729.970 ELR

• Engine Code: BSW, BLS
• Thickness [mm]: 0.4
• Inner Diameter [mm]: 46
• Outer Diameter [mm]: 76
• Name: TIHEND, EGR-KLAPP
• Manufacturer: AJU
• Additional information: AJU01112700
• Lisainfo: AJU01112700

Inner Diameter [mm]: 32

• Fitting Position: Intake Manifold
• Inner Diameter [mm]: 60
• Outer Diameter [mm]: 66
• Thickness [mm]: 3
• Material: FPM (fluoride rubber)
• Shape: O-Ring
• Manufacturer: ELRING

• Weight [kg]: 0.007
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: BLS
• Fitting Position: Throttle Valve at EGR valve, Throttle Housing
• Manufacturer: WAHLER

• Engine Code: BLS
• Vehicle Identification Number (VIN) from: 5J-83046 502
• Fitting Position: Throttle Housing
• Inner Diameter [mm]: 55
• Outer Diameter [mm]: 59
• Thickness [mm]: 4.6
• Material: FPM (fluoride rubber)
• Shape: A Shape
• Colour: red
• Manufacturer: ELRING

for OE number: 03G 128 063 G, 03G 128 063 M, 03G 128 063 Q, 03L 128 063 AC, 03L 128 063 E, 03L 128 063 G, 03L 128 063 J, 03L 128 063 L, 03L 128 063 M, 03L 128 063 Q, 03L 128 063 R, A2C59512935, A2C59514304

• Engine Code: BLS
• Vehicle Identification Number (VIN) from: 5J83046502
• Fitting Position: Throttle Housing, Throttle Valve at EGR valve
• Material: Rubber
• Colour: black
• Lisainfo: Seal, EGR valve
• Additional information: Seal, EGR valve

• Engine Code: BLS
• Fitting Position: EGR valve at manifold
• Inner Diameter [mm]: 44
• Thickness [mm]: 2.6
• Material: FPM (fluoride rubber)
• Shape: O-Ring
• Alternatively:

• Engine Code: BLS
• Vehicle Identification Number (VIN) from: 5J-83046 502
• Fitting Position: Throttle Housing
• Thickness [mm]: 4.6
• Inner Diameter [mm]: 55
• Outer Diameter [mm]: 59
• Name: Tihend, EGR-klapp
• Manufacturer: DRM

• Vehicle Identification Number (VIN) from: 5J-83046502
• Weight [kg]: 0.004
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Weight [kg]: 0.05
• Weight [g]: 50
• Manufacturer: METALCAUCHO

• Engine Code: BSW
• Fitting Position: Pipe at manifold
• Manufacturer: WAHLER

• Voltage [V]: 12
• Number of pins: 2
• Operating Mode: Electric
• Valve type: Solenoid Valve
• for OE number: 1J0906283B, 1J0906283C, 1K0906283A, 1K0906283
• Weight [kg]: 1.1
• Packaging length [cm]: 21
• Packaging width [cm]: 21
• Packaging height [cm]: 17

Manufacturer: MAGNETI MARELLI

• Operating Mode: Pneumatic
• Fabrication Number: EGR-SK-000
• Manufacturer: NTY
• Name: NTY EGR-SK-000

• Supplementary Article/Supplementary Info: without EGR cooler, with gaskets/seals
• Operating Mode: Pneumatic
• Fabrication Number: EGR-CH-011

• Engine Code: BSW
• Valve type: Diaphragm Valve
• Operating Mode: Pneumatic
• Supplementary Article/Supplementary Info: with seal
• Name: EGR-KLAPP
• Manufacturer: MAX

• Fitting Position: Pipe at EGR valve
• Supplementary Article/Supplementary Info: with gaskets/seals
• Fabrication Number: EGR-VW-044

• Name: EGR-klapp
• Manufacturer: MAG

• Fitting Position: after EGR cooler
• Fabrication Number: EGR-VW-045
• Manufacturer: NTY
• Name: NTY EGR-VW-045

• Engine Code: BSW
• Operating Mode: Pneumatic
• for OE number: 038131501AN
• Supplementary Article/Supplementary Info: with gaskets/seals
• Name: EGR-KLAPP
• Manufacturer: NRF

• Supplementary Article/Supplementary Info: with gaskets/seals
• Operating Mode: Pneumatic
• Weight [kg]: 0.5
• Required quantity: 1
• General Information: EGR Valve
• Manufacturer: VIKA

• Engine Code: BSW
• Operating Mode: Pneumatic
• Weight [kg]: 0.58
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 14SKV019

• Engine Code: BSW
• Operating Mode: Pneumatic
• Valve type: Diaphragm Valve
• Supplementary Article/Supplementary Info: with seal
• Quality class: PJ
• Name: Exhaust gas recirculation valve

• Operating Mode: Pneumatic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Packaging length [cm]: 13
• Packaging width [cm]: 11
• Packaging height [cm]: 9
• Weight [kg]: 0.442
• Valve type: Diaphragm Valve

• Engine Code: BSW
• Operating Mode: Pneumatic
• Supplementary Article/Supplementary Info: with seal
• Name: DRM 211104
• Manufacturer: DR.MOTOR AUTOMOTIVE

• Engine Code: BSW
• Weight [kg]: 0.37
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 14SKV702

• Operating Mode: Pneumatic
• New Part:
• Used part return not required:
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of Gaskets/Seals/Seal Rings: 3
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: BSW
• Operating Mode: Pneumatic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Manufacturer: WAHLER
• Name: WA 7496D/1

• Engine Code: BSW
• Manufacturer: DR MOTOR PRZEWODY PRZELEWOWE
• Name: DRM 211150

• Weight [kg]: 0.36
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 14SKV713

• Engine Code: BSW
• Operating Mode: Pneumatic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Manufacturer: WAHLER ZAWORY EGR

• Engine Code: BSW
• Supplementary Article/Supplementary Info: with gaskets/seals
• Name: EGR-klapp
• Manufacturer: NIS
• Lisainfo: JEEP PATRIOT(MK) (07-) 2.0 CRDi
• Additional information: JEEP PATRIOT(MK) (07-) 2.0 CRDi

Technical Information: FIRST FIT - Includes gaskets and O-rings when needed

• Name: EGR-KLAPP
• Manufacturer: MAG

• Engine Code: BLS
• Name: Toruhendus, EGR-klapp
• Manufacturer: DRM

• Engine Code: BSW
• Operating Mode: Pneumatic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Net weight [kg]: 0.48
• Name: EGR-KLAPP
• Manufacturer: ELS

• Supplementary Article/Supplementary Info: with seal
• Operating Mode: Pneumatic
• Quality: OE EQUIVALENT
• Name: EGR-klapp
• Manufacturer: MD

• Engine Code: BSW
• Manufacturer: DELPHI
• Name: DE EG10421-12B1

• Engine Code: BSW
• Name: EP 1.963.029
• Manufacturer: EPS

• Name: Toruhendus, EGR-klapp
• Manufacturer: MD

• Engine Code: BSW
• Number of connectors: 1
• Operating Mode: Pneumatic
• Weight [kg]: 0.5
• Supplementary Article/Supplementary Info: with gaskets/seals
• Name: EGR-KLAPP
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: BSW
• Supplementary Article/Supplementary Info: with gaskets/seals
• Operating Mode: Vacuum-controlled
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6NU010171301

• Engine Code: BLS
• Supplementary Article/Supplementary Info: without EGR cooler
• Name: ZAWàR EGR VW 1,4TDI/1,9TDI/2,0TDI
• Manufacturer: NIS

• New Part:
• Engine Code: BSW
• Housing Type: Aluminium Housing
• Operating Mode: Pneumatic
• Cooling Type: Air cooled
• Supplementary Article/Supplementary Info: with gaskets/seals
• Name: EGR-KLAPP
• Manufacturer: TRI

• Supplementary Article/Supplementary Info: without EGR cooler, with gaskets/seals
• Operating Mode: Electric
• Number of pins: 5
• Fabrication Number: EGR-AU-007
• Manufacturer: NTY
• Name: NTY EGR-AU-007

• Engine Code: BLS
• Fitting Position: EGR valve at manifold
• Inner Diameter [mm]: 44
• Thickness [mm]: 2.6
• Material: FPM (fluoride rubber)
• Shape: O-Ring

• Engine Code: BLS
• Operating Mode: Electric
• Supplementary Article/Supplementary Info: with gaskets/seals
• Manufacturer: JP GROUP
• Lisainfo: EGR Valve
• Additional information: EGR Valve

• Engine Code: BSW
• Operating Mode: Pneumatic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Version: AM
• Manufacturer: METZGER

• Engine Code: BLS
• Valve type: Control Valve
• Operating Mode: Electric
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: with seal
• Name: EGR-klapp
• Manufacturer: MAX

• Engine Code: BLS
• Voltage [V]: 12
• Connector Shape: oval
• Number of pins: 5
• Operating Mode: Electric
• Supplementary Article/Supplementary Info: with gaskets/seals
• Name: EGR-klapp
• Manufacturer: NRF

• Engine Code: BLS
• Operating Mode: Electric
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of connectors: 5
• Net weight [kg]: 0.7
• Name: EGR-KLAPP
• Manufacturer: ELS

• Operating Mode: Electric
• Manufacturer: ASHIKA

• Operating Mode: Electric
• Manufacturer: JAPKO

• Engine Code: BSW
• Valve type: Diaphragm Valve
• Operating Mode: Pneumatic
• Supplementary Article/Supplementary Info: with seal
• Name: EGR-KLAPP
• Manufacturer: PIE

• for article number: 03G 131 521R
• Name: Toruhendus, EGR-klapp
• Manufacturer: MD

• Engine Code: BLS
• Operating Mode: Electric
• Supplementary Article/Supplementary Info: with seal
• Quality class: PJ
• Name: Exhaust gas recirculation valve

• Engine Code: BLS
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Engine Code: BLS
• Operating Mode: Electric
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: DR MOTOR PRZEWODY PRZELEWOWE
• Name: DRM 211121

• Name: EGR-klapp
• Manufacturer: MAG

• Engine Code: BLS
• Voltage [V]: 12
• Operating Mode: Electric
• Number of pins: 5
• Weight [kg]: 0.9
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 14SKV170

• Operating Mode: Electric
• Number of pins: 5
• Connector Shape: oval
• Observe the vehicle manufacturer specifications:
• New Part:
• Used part return not required:
• Supplementary Article/Supplementary Info: with seal
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: BLS
• Manufacturer: DELPHI
• Name: DE EG10427-12B1

• Engine Code: BLS
• Number of connectors: 5
• Operating Mode: Electric
• Weight [kg]: 0.66
• Name: EGR-KLAPP
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 5J-7-000 001
• Engine Code: BLS
• Valve type: Control Valve
• Operating Mode: Electric
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: with seal
• Name: EGR-KLAPP
• Manufacturer: PIE

• Voltage [V]: 12
• Operating Mode: Electric
• Alternatively:
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of connectors: 5
• Weight [kg]: 0.74
• Alternative Repair Kit: 555192
• Number of Gaskets/Seals/Seal Rings: 1
• Manufacturer: ERA

• Engine Code: BLS
• Operating Mode: Pneumatic
• Weight [kg]: 2.44
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 14SKV118

• Engine Code: BLS
• Supplementary Article/Supplementary Info: with seal
• Operating Mode: Electric
• Manufacturer: METZGER

• Engine Code: BSW, BLS
• Inner Diameter [mm]: 61
• Thickness [mm]: 3
• Material: NBR (nitrile butadiene rubber)
• Shape: O-Ring
• Fitting Position: EGR valve at manifold
• Alternatively:

• Engine Code: BSW, BLS
• Inner Diameter [mm]: 61
• Thickness [mm]: 3
• Material: NBR (nitrile butadiene rubber)
• Shape: O-Ring
• Fitting Position: EGR valve at manifold