• Lambda Sensor: Regulating Probe, Thread pre-greased
• Length [mm]: 642
• Number of circuits: 5
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-AU-012
• Manufacturer: NTY

• for OE number: 059 906 051 C, 076 906 051 B
• Number of pins: 3
• Connector Shape: D Shape
• Fabrication Number: ECS-AU-001
• Manufacturer: NTY

• General Information: pressure sensor
• Manufacturer: VIKA

• Number of connectors: 3
• Material: Plastic
• for OE number: 059 906 051 C
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: MAX

• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.03
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV333

• for OE number: 059906051C
• Quality: EQUIVALENT
• Manufacturer: MEAT&DORIA

• Exhaust System: before soot particulate filter
• Number of pins: 3
• Pressure [Pa] from: -14,000
• Pressure [Pa] to: 100,000
• for OE number: 03G906051G
• Name: Andur, heitgaasisurve
• Manufacturer: NRF

• for OE number: 076 906 051 B
• Manufacturer: TRUCKTEC

• General Information: pressure difference sender
• Manufacturer: BORSEHUNG

• Number of connectors: 3
• Manufacturer: FAST

• Engine Code: CFHF
• Exhaust System: before soot particulate filter
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Name: ANDUR, HEITGAASISURVE
• Manufacturer: EPS

• Number of connectors: 3
• Material: Plastic
• Sensor Type: Differential Pressure Sensor
• Weight [kg]: 0.02
• for OE number: 059 906 051 C
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of mounting bores: 1
• Number of pins: 3
• Connector Shape: D Shape
• Number of circuits: 2
• for OE number: 059906051C
• Weight [kg]: 0.022
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for article number: 076 906 051 B
• Weight [g]: 100
• Guarantee: 3 years guarantee
• Length 1 [mm]: 69
• Width 1 [mm]: 46
• Height 1 [mm]: 49
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Vehicle Identification Number (VIN) from: 1Z-9-000 001
• Engine Code: CLCA, CFHF
• Block Separation:
• Sensor Type: Differential Pressure Sensor
• Output Voltage, up to [V]: 5
• Measuring Range from [kPa]: -15
• Measuring Range to [kPa]: 100
• Number of pins: 3
• Number of mounting bores: 1
• Manufacturer: PIERBURG

• Name: ANDUR, HEITGAASISURVE
• Manufacturer: BOS

• Fitting Position: after soot particulate filter
• Manufacturer: FAE

Manufacturer: MAGNETI MARELLI

• Spanner Size: 17
• Number of pins: 2
• Fabrication Number: EGT-SK-002
• Cable Length [mm]: 730
• Manufacturer: NTY

• Exhaust System: before soot particulate filter
• Number of pins: 3
• Opening pressure [kPa]: 14
• Name: DE DPS00001
• Manufacturer: DELPHI

• Guarantee: 3 years guarantee
• Weight [kg]: 0.09
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV316

• Fitting Position: after soot particulate filter
• Component Number: G 527, G 648
• Number of pins: 2
• Mounting Type: Bolted
• Socket colour: Orange
• Cable Length [mm]: 730
• Sensor Type: NTC Sensor
• Overall Length [mm]: 865
• Thread Pitch [mm]: 1.5
• Thread Size: M 14
• Connector Shape: D Shape
• Spanner Size: 17
• Supplementary Article/Info 2: with cable
• Housing material: Stainless Steel
• Bolt Head-/Nut Design: Hexagon
• Shape: straight
• Line insulation design: with silicone-coated woven-fibre insulation
• Manufacturer: TOPRAN

Exhaust System: for vehicles with factory fitted soot -/particulate filter General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year to: 03.2013
• Exhaust System: before turbocharger
• Number of circuits: 2
• Length [mm]: 860
• Manufacturer: ASHIKA

• Exhaust System: before soot particulate filter
• Mounting Type: Bolted
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PP009409251
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Supplementary Article/Info 2: with cable
• Cable Length [mm]: 730
• Overall Length [mm]: 860
• Number of pins: 2
• Connector Shape: oval
• Socket colour: Orange
• Thread Size: M14 x 1,5
• Spanner Size: 17
• Sensor Type: NTC Sensor
• Manufacturer: VALEO

• Number of pins: 3
• Manufacturer: METZGER

• Construction Year to: 03.2013
• Exhaust System: before soot particulate filter
• Length [mm]: 730
• Manufacturer: ASHIKA

• Construction Year to: 03.2013
• Exhaust System: after soot particulate filter
• Manufacturer: ASHIKA

• for OE number: 03L 906 088 JG
• Thread Size: M14 x 1,5
• Sensor Type: NTC Sensor
• Number of pins: 2
• Connector Shape: D Shape
• Temperature range from [°C]: -40
• Temperature range to [°C]: 900
• Socket colour: black
• Line insulation design: with thermal protection flexible insulating tubing
• Fabrication Number: EGT-VW-026
• Cable Length [mm]: 630
• Manufacturer: NTY
• Name: NTY EGT-VW-026

• Cable Length [mm]: 700
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.1
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV445

Fitting Position: before exhaust turbocharger, before soot particulate filter

• Supplementary Article/Info 2: with cable
• Cable Length [mm]: 635
• Overall Length [mm]: 770
• Number of pins: 2
• Connector Shape: oval
• Socket colour: black
• Thread Size: M14 x 1,5
• Spanner Size: 17
• Sensor Type: NTC Sensor
• Manufacturer: VALEO

• Pressure hose connector diameter [mm]: 5, 6.5
• Length [m]: 1
• Material: Silicone
• Chemical Properties: Oil resistant
• Temperature range from [°C]: -40
• Temperature range to [°C]: +350
• Clamping Range from [mm]: 10, 11, 11.5, 12.5
• Clamping Range to [mm]: 12.5, 13.5, 14, 15
• SVHC: No SVHC present!
• Manufacturer: HBE

Exhaust System: for vehicles with factory fitted soot -/particulate filter Supplementary Article/Info 2: with connection line, with protection hose, with marten protection, with clamps Technical Information: Using this repair kit, defective connecting hoses between the diesel particle filter (DPF) and the differential pressure sensor can be quickly and simply replaced. Pine marten bites may also be responsible for damage, and not just mechanical and thermic influences. That's why this set is supplied with protective hoses that are resistant to both high temperatures and pine marten bites. They protect the silicone pressure lines from external influences. The spring band clamps included in the scope of supply ensure that the hoses are held securely. Name: Remondikomplekt, survetorustik (tahma-/partiklifilter)

• Engine Code: CFHF, CLCA
• Exhaust System: after soot particulate filter
• Voltage [V]: 12
• Cable Length [mm]: 725
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.08
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Fitting Position: after soot particulate filter
• Number of pins: 2
• Cable Length [mm]: 880
• Sensor Type: NTC Sensor
• Name: Andur, heitgaasitemperatuur
• Manufacturer: MEY

• Length [mm]: 750
• Conductor Number: 5
• Number of circuits: 5
• Cable Length [mm]: 750
• Lambda Sensor: Heated
• Manufacturer: MAGNETI MARELLI
• Name: MM OSM149

• Lambda Sensor: Regulating Probe
• Exhaust System: before catalytic converter
• Fitting Position: Front
• Engine Code: CFHF
• Length [mm]: 900
• Number of connectors: 5
• Manufacturer: VERNET

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Colour: red
• Guarantee: 3 years guarantee
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Exhaust System: after soot particulate filter
• Cable Length [mm]: 710
• Number of pins: 2
• Manufacturer: DLP

Name: CZUJNIK TEMP. SPALIN VW ARTEON, CADDY, GOLF, JETTA, PASSAT, SCIROCCO, TIGUAN, TOURAN, T-ROC 03-

• Exhaust System: before soot particulate filter
• Cable Length [mm]: 675
• Number of pins: 2
• Name: DE TS30349-12B1
• Manufacturer: DELPHI

• Engine Code: CLCA
• Lambda Sensor: Regulating Probe, Lambda Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Overall Length [mm]: 750
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Fitting Position: before exhaust turbocharger
• Cable Length [mm]: 802
• Number of pins: 2
• Version: AM
• Manufacturer: METZGER

• Engine Code: CFHF
• Fitting Position: before catalytic converter
• Cable Length [mm]: 735
• Conductor Number: 5
• Supplementary Article/Info 2: with fastening material
• Number of circuits: 5
• Name: EP 1.998.374
• Manufacturer: EPS

Lambda Sensor: Regulating Probe, Heated, Planar probe, Broadband lambda sensor, Thread pre-greased

• Engine Code: CFHF
• Fitting Position: before catalytic converter
• Lambda Sensor: Regulating Probe, Heated
• Model Year from: 2011
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 6
• Cable Length [mm]: 805
• Weight [kg]: 0.121
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CFHF, CLCA
• Number of pins: 2
• Connector Shape: D Shape
• Cable Length [mm]: 725
• for OE number: 03L 906 088 BJ
• Manufacturer: MEAT&DORIA

• Lambda Sensor: Regulating Probe, Broadband lambda sensor, Heated
• Fitting Position: before catalytic converter
• Engine Code: CFHF
• Block Separation:
• Exhaust System: for pre-catalytic converter
• Cable Length [mm]: 720
• Manufacturer: DELPHI
• Name: DE ES20541-12B1

• Fitting Position: before catalytic converter
• Engine Code: CFHF
• Lambda Sensor: Broadband lambda sensor
• Cable Length [mm]: 800
• Number of pins: 6
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: Lambda andur
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: before exhaust turbocharger
• Line insulation design: with thermal protection flexible insulating tubing
• Length [mm]: 680
• Socket colour: black
• Thread Size: M14 x 1,5
• for OE number: 03L 906 088 JG
• Weight [kg]: 0.1
• Shape: Bent
• Tightening Torque [Nm]: 45
• Sensor Type: NTC Sensor
• Number of pins: 2
• Connector Shape: D Shape
• Temperature range from [°C]: -40
• Temperature range to [°C]: 900
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: CLCA
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Guarantee: 5 years guarantee
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Engine Code: CFHF
• Construction Year from: 02.2011
• Lambda Sensor: Regulating Probe, Broadband lambda sensor
• Number of pins: 5
• Cable Length [mm]: 570
• Manufacturer: MEAT&DORIA

• Lambda Sensor: Lambda Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.15
• Always compare old and new part (in particular OE No.):
• Technical Information: Universal
• Manufacturer: SKV GERMANY
• Name: CE 09SKV915

• Lambda Sensor: Regulating Probe, Lambda Sensor
• Construction Year from: 02.2011
• Construction Year to: 05.2013
• Exhaust System: before catalytic converter
• Voltage [V]: 12
• Guarantee: 3 years guarantee
• Weight [kg]: 0.14
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV910

• Engine Code: CLCA
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Overall Length [mm]: 750
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Exhaust System: before turbocharger
• Cable Length [mm]: 730
• Number of pins: 2
• Name: DE TS30344-12B1
• Manufacturer: DELPHI

• Fitting Position: before exhaust turbocharger
• Number of pins: 2
• Cable Length [mm]: 780
• Sensor Type: NTC Sensor
• Name: Andur, heitgaasitemperatuur
• Manufacturer: MEY

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Engine Code: CLCA
• Length [mm]: 800
• Number of pins: 6
• Socket colour: black
• Manufacturer: FAE

• Engine Code: CFHF
• Exhaust System: before turbocharger
• External Thread Size: M14 x 1,5
• Cable Length [mm]: 680
• Line insulation design: with thermal protection flexible insulating tubing
• Number of pins: 2
• Socket colour: black
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: before soot particulate filter
• Sensor Type: Closed-type Sensor, PTC
• Cable Length [mm]: 620
• Number of pins: 2
• Alternative Repair Kit: 0894549, 0894494
• Manufacturer: METZGER

• Construction Year from: 02.2011
• Construction Year to: 04.2013
• Engine Code: CFHF
• Fitting Position: before catalytic converter
• Number of pins: 6
• Cable Length [mm]: 735
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Connector Shape: oval
• Manufacturer: VALEO
• Name: VA 368403

Lambda Sensor: Planar probe, Broadband lambda sensor, Thread pre-greased, Heated

• Fitting Position: before soot particulate filter
• Supplementary Article/Supplementary Info: with synthetic grease

• Fitting Position: before exhaust turbocharger
• Connector Shape: D Shape
• Cable Length [mm]: 630
• Supplementary Article/Supplementary Info: with synthetic grease