Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Transmission Type: Automatic Transmission
-
Material: GRP
(Glass fibre Reinforced Plastic) - for OE number: N 906 929 01
- Name: Jahutusvedeliku flants
- Manufacturer: MAX
- Transmission Type: Automatic Transmission
-
Shape: T Shape
(T Piece) - Number of inlets/outlets: 3
- Angle [°]: 90
-
Material: GRP
(Glass fibre Reinforced Plastic) -
for pipe diameter [mm]: 32,
20 - for OE number: N 906 929 01
-
Name: HENDUS-
/ JAGAJALLI, TORUSTIKUD - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Supplementary Article/Supplementary Info: with gaskets/
seals -
Material: Plastic,
GRP (Glass fibre Reinforced Plastic) - Name: Jahutusvedeliku flants
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- for OE number: 6H121131C
- Supplementary Article/Info 2: without thermostat
- Name: Jahutusvedeliku flants
- Manufacturer: MAX
- General Information: pipe union
- Manufacturer: VIKA
- Material: Plastic
- Shape: straight
- Manufacturer: DELLO AUTOMEGA
- for OE number: 1K0 122 291 C
- Name: Jahutusvedeliku flants
- Manufacturer: MAX
- Transmission Type: Manual Transmission
- Weight [kg]: 0.03
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Transmission Type: Manual Transmission
- Fitting Position: Radiator
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: MAX
- Transmission Type: Manual Transmission
- Weight [kg]: 0.055
- Supplementary Article/Supplementary Info: with quick coupling
- for OE number: 6Q0 122 291 E
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Supplementary Article/Supplementary Info: with seal
- Material: Plastic
- Heating/Cooling: with thermal switch connector
- Name: Jahutusvedeliku flants
- Manufacturer: MAX
- Transmission Type: Manual Transmission
- Weight [kg]: 0.055
- Supplementary Article/Supplementary Info: with quick coupling
- for OE number: 6Q0 122 291 E
- Name: SW 30 94 5984
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Weight [kg]: 0.031
- Inner Diameter [mm]: 15
- Outer Diameter [mm]: 20
- Outer Diameter 1 [mm]: 8
- Inner Diameter 1 [mm]: 4
- General Information: pipe union
- Manufacturer: VIKA
- for OE number: 6Q0122291E
- Supplementary Article/Supplementary Info: with seal
- Weight [g]: 55
- Supplementary Article/Info 2: without thermostat
- Name: IM 90570
- Manufacturer: ORIGINAL IMPERIUM
- for OE number: 1K0122291C
- Manufacturer: NRF
-
Fitting Position: Radiator,
Lower - Manufacturer: JP GROUP
- Lisainfo: Coolant Flange
- Additional information: Coolant Flange
- Transmission Type: Automatic Transmission
-
Fitting Position: Radiator,
Upper - Manufacturer: JP GROUP
- Lisainfo: Coolant Flange
- Additional information: Coolant Flange
- Material: Aluminium
- General Information: pipe union;plastic to aluminum
- Manufacturer: VIKA
- for OE number: 3B0122291B
- Supplementary Article/Supplementary Info: with seal
- Weight [g]: 29
- Supplementary Article/Info 2: without thermostat
- Name: IM 90582
- Manufacturer: ORIGINAL IMPERIUM
- Fitting Position: Upper
- for OE number: 6Q0122291E
- Manufacturer: NRF
- Supplementary Article/Supplementary Info: with seal
- Material: Plastic
- Heating/Cooling: with thermal switch connector
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- for OE number: 6H121131C
- Supplementary Article/Supplementary Info: with seal
- Weight [g]: 10
- Supplementary Article/Info 2: without thermostat
- Name: Jahutusvedeliku flants
- Manufacturer: IMP
- Weight [kg]: 0.05
- Manufacturer: METALCAUCHO
- General Information: pipe union
- Manufacturer: VIKA
- General Information: pipe union
- Manufacturer: VIKA
- Transmission Type: Automatic Transmission
- Material: Plastic
- Weight [kg]: 0.05
- for OE number: 3C0 122 291
- Supplementary Article/Supplementary Info: with quick coupling
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 59.2
- Inner Diameter [mm]: 29
- Weight [kg]: 0.025
- Supplementary Article/Supplementary Info: with quick coupling
- for OE number: 3B0 122 291 B
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Inner Diameter [mm]: 15
- Outer Diameter [mm]: 20
- Outer Diameter 1 [mm]: 8
- Inner Diameter 1 [mm]: 4
- Weight [kg]: 0.031
- for OE number: 1K0 122 291 C
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- General Information: pipe union
- Manufacturer: VIKA
- Length [mm]: 59.2
- Inner Diameter [mm]: 29
- Weight [kg]: 0.025
- Supplementary Article/Supplementary Info: with quick coupling
- for OE number: 3B0 122 291 B
- Name: SW 30 10 3334
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: 3B0 122 291 B
- Weight [kg]: 0.036
- Cooling Hose: from waterpump to connecting pipe
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Transmission Type: Automatic Transmission
-
Fitting Position: Radiator,
Upper Left - Supplementary Article/Supplementary Info: with seal
- Supplementary Article/Info 2: with fastening clamp
- Material: Plastic
- Manufacturer: METZGER
- Weight [kg]: 0.05
- Supplementary Article/Supplementary Info: with seal
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Supplementary Article/Supplementary Info: with seal
- for OE number: 06J121132G
- Manufacturer: METZGER
- General Information: pipe union
- Manufacturer: BORSEHUNG
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks