Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: Lower
- Manufacturer: JP GROUP
- Lisainfo: Quick coupling piece
- Additional information: Quick coupling piece
- for manufacturer number: 7920091
- Manufacturer: KAMOKA
-
Fitting Position: Lower,
Radiator -
Supplementary Article/Supplementary Info: with gasket/
seal -
Supplementary Article/Info 2: with clip,
with breather valve - for OE number: 6Q0 122 291F
- Consult accessories list for recommended additional repairs:
- Number of inlets/outlets: 2
-
Material: GRP
(Glass fibre Reinforced Plastic) - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Material: Plastic
- Manufacturer: DELLO AUTOMEGA
- Weight [kg]: 0.082
- Fitting Position: Lower
- Required quantity: 1
- General Information: Coolant flange
- Manufacturer: VIKA
- Fitting Position: Lower
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: MAX
- Material: Plastic
-
Fitting Position: transmission sided,
Cylinder Head - Heating/Cooling: with thermal switch connector
- Supplementary Article/Info 2: with seal ring
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: HAN
- Lisainfo: 110 361 HP
- Additional information: 110 361 HP
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- for manufacturer number: 7920096
- Manufacturer: KAMOKA
- Fitting Position: Left
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
-
Supplementary Article/Supplementary Info: with gasket/
seal - Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: MAX
- Fitting Position: Lower
-
Fabrication Number: CTM-
VW- 022 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Colour: black
- Fitting Position: Lower
- Weight [kg]: 0.082
- Supplementary Article/Supplementary Info: with quick coupling
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: 1J0121100
- Fitting Position: Lower
-
Supplementary Article/Supplementary Info: without gasket/
seal - Weight [g]: 88
- Supplementary Article/Info 2: without thermostat
- Name: IM 90361
- Manufacturer: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
-
Supplementary Article/Supplementary Info: with gasket/
seal - for OE number: 1C0 122 291
- Consult accessories list for recommended additional repairs:
- Number of inlets/outlets: 2
-
Material: GRP
(Glass fibre Reinforced Plastic) - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Cylinder Head
- Heating/Cooling: with thermal switch connector
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Fitting Position: Front
- Material: Plastic
- Name: Jahutusvedeliku flants
- Manufacturer: MAX
- Quantity: 1
- Material: Plastic
-
Fitting Position: Front,
Longitudinal - General Information: Thermostat cover
- Manufacturer: VIKA
- Colour: black
- Fitting Position: Lower
- Supplementary Article/Supplementary Info: with quick coupling
- Name: SW 30 94 6154
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: BNM
- Construction Year to: 04.2007
- Manufacturer: FACET
- for manufacturer number: 7920061
- Manufacturer: KAMOKA
- Weight [kg]: 0.153
-
Supplementary Article/Supplementary Info: with gasket/
seal - Required quantity: 1
- General Information: Coolant flange
- Manufacturer: VIKA
- General Information: Coolant flange
- Manufacturer: VIKA
- Quantity: 1
- Material: Plastic
- Opening Temperature [°C]: 92
- Manufacturer: 3RG
- Number of inlets/outlets: 3
-
Material: GRP
(Glass fibre Reinforced Plastic) -
for pipe diameter [mm]: 8,
32 - for OE number: 1C0 121 438A
- Consult accessories list for recommended additional repairs:
- Name: Jahutusvedeliku flants
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Diameter 1 [mm]: 32
- Diameter 2 [mm]: 16
- Diameter 3 [mm]: 20
- for OE number: 038121132D
- Manufacturer: MEAT&DORIA
-
Supplementary Article/Supplementary Info: with gasket/
seal - Supplementary Article/Info 2: without engine temperature sensor
-
Fitting Position: Cylinder Head,
Flywheel side - Manufacturer: VERNET
Cooling Hose: from EGR cooler to flange, from engine to engine cooler
- Construction Year to: 04.2007
- Supplementary Article/Info 2: without thermostat
- Weight [g]: 156
- Fitting Position: Cylinder Head
-
Supplementary Article/Supplementary Info: with gasket/
seal - Material: Plastic
- for OE number: 038121132D
- Colour: grey
- Number of mounting bores: 2
- Packaging length [cm]: 15.9
- Packaging width [cm]: 15
- Packaging height [cm]: 11
- Manufacturer: MOTORAD
- Material: Plastic
- Manufacturer: VIEROL
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Weight [kg]: 0.153
-
Supplementary Article/Supplementary Info: with gasket/
seal - for OE number: 038 121 132 D
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Material: Plastic
- Fitting Position: Front
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Supplementary Article/Supplementary Info: with gasket/
seal - Fitting Position: Cylinder Head
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- for OE number: 038 121 132 D
-
Supplementary Article/Supplementary Info: with gasket/
seal - Name: SW 30 94 6298
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: BNM
- Construction Year to: 04.2007
- Name: EP 1.660.002
- Manufacturer: EPS
- for OE number: 3M218B011AA
-
Supplementary Article/Supplementary Info: with gasket/
seal - Weight [g]: 152
- Supplementary Article/Info 2: without thermostat
- Name: IM 90573
- Manufacturer: ORIGINAL IMPERIUM
General Information: The installation of this product can be performed only in a workshop environment by trained professionals
-
Fitting Position: Cylinder Head,
transmission sided - Cooling Hose: from engine to engine cooler
- for OE number: 038121132D
- Manufacturer: NRF
- Length [mm]: 185
- Height [mm]: 65
-
Supplementary Article/Supplementary Info: with gasket/
seal - Width [mm]: 90
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Cylinder Head,
transmission sided - Material: Plastic
- Heating/Cooling: with thermal switch connector
- Supplementary Article/Info 2: with seal ring
-
Fabrication Number: CTM-
VW- 030 - Manufacturer: NTY
-
Name: NTY CTM-
VW- 030
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Weight [kg]: 0.15
- Supplementary Article/Info 2: without thermostat
- Manufacturer: METALCAUCHO
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks