Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Material: Plastic
-
Manufacturer: JP GROUP A/
S - Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Thickness [mm]: 3.5
- Inner Diameter [mm]: 19.5
-
Material: NBR
(nitrile butadiene rubber) - Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Quantity per packing unit: 100
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Material: Plastic
- for OE number: 032121142
- Manufacturer: DELLO AUTOMEGA
-
Material: NBR
(nitrile butadiene rubber) - Weight [kg]: 0.003
- Thickness [mm]: 3.5
- Inner Diameter [mm]: 19.5
- Required quantity: 1
- General Information: O ring
- Manufacturer: VIKA
- Weight [kg]: 0.015
- Material: Plastic
- Required quantity: 1
- General Information: Stop spring
- Manufacturer: VIKA
- Thickness [mm]: 3.5
- Inner Diameter [mm]: 19.5
-
Material: NBR
(nitrile butadiene rubber) - Weight [kg]: 0.003
-
Name: TIHEND,
JAHUTUSVEDEDELIKUFLANTS - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Material: Plastic
- Name: STOPPER
- Manufacturer: MAX
- Material: Plastic
- Weight [kg]: 0.015
-
Name: KINNITUSVEDRU,
JAHUTUSVEDELIKUFLANTS- SULGURKORK - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Width [mm]: 32
- Thickness [mm]: 1.98
- Material: Steel
- Weight [kg]: 0.001
-
Name: KINNITUSVEDRU,
JAHUTUSVEDELIKUFLANTS- SULGURKORK - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Supplementary Article/Supplementary Info: with accessories
-
Name: SULGURKORK,
JAHUTUSVEDELIKUFLANTS - Manufacturer: MAX
- Housing material: Plastic
- for OE number: 032121121K
- Manufacturer: DELLO AUTOMEGA
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Temperature range from [°C]: 87
- Temperature range to [°C]: 102
- Material: Plastic
-
Supplementary Article/Supplementary Info: with gasket/
seal - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Vehicle Identification Number (VIN) from: 6Y-
Y- 021592 -
Fitting Position: Radiator,
Upper - Supplementary Article/Info 2: with clip
-
Supplementary Article/Supplementary Info: with gasket/
seal - for OE number: 6Q0 122 291E
- Consult accessories list for recommended additional repairs:
- Number of inlets/outlets: 3
-
Material: GRP
(Glass fibre Reinforced Plastic) - Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Lower
- Manufacturer: JP GROUP
- Lisainfo: Quick coupling piece
- Additional information: Quick coupling piece
- for manufacturer number: 7920079
- Manufacturer: KAMOKA
-
Vehicle Identification Number (VIN) from: 6Y-
Y- 021592 - Cooling Hose: from connecting pipe to engine cooler
-
Fitting Position: Radiator,
Upper - Lisainfo: Quick coupling piece
- Additional information: Quick coupling piece
-
Engine Code: AUB,
BBZ -
Vehicle Identification Number (VIN) from: 6Y-
Y- 021592 - Block Separation:
- Fitting Position: Radiator
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: MAX
- for manufacturer number: 7920091
- Manufacturer: KAMOKA
- for manufacturer number: 7920022
- Manufacturer: KAMOKA
-
Fitting Position: Lower,
Radiator -
Supplementary Article/Supplementary Info: with gasket/
seal -
Supplementary Article/Info 2: with clip,
with breather valve - for OE number: 6Q0 122 291F
- Consult accessories list for recommended additional repairs:
- Number of inlets/outlets: 2
-
Material: GRP
(Glass fibre Reinforced Plastic) - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Material: Plastic
- Manufacturer: DELLO AUTOMEGA
- for manufacturer number: 7920121
- Manufacturer: KAMOKA
-
Engine Code: AUB,
BBZ -
Vehicle Identification Number (VIN) from: 6Y-
Y- 021 592 - Block Separation:
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Weight [kg]: 0.082
- Fitting Position: Lower
- Required quantity: 1
- General Information: Coolant flange
- Manufacturer: VIKA
- Fitting Position: Lower
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: MAX
- for manufacturer number: 7920204
- Manufacturer: KAMOKA
- Weight [kg]: 0.055
- Required quantity: 1
- General Information: Coolant flange
- Manufacturer: VIKA
- Diameter 1 [mm]: 32
- Diameter 2 [mm]: 57
- for OE number: 032121121G
- Manufacturer: MEAT & DORIA
- Temperature range from [°C]: 87
- Temperature range to [°C]: 102
- for OE number: 032 121 121 K
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Engine Code: AUB,
BBZ - Vehicle Identification Number (VIN) from: ******6Y*Y*021592
- Block Separation:
- Weight [kg]: 0.055
- Supplementary Article/Supplementary Info: with quick coupling
- for OE number: 6Q0 122 291 E
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Colour: black
- Fitting Position: Lower
- Weight [kg]: 0.082
- Supplementary Article/Supplementary Info: with quick coupling
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: 6Q0122291E
-
Supplementary Article/Supplementary Info: with gasket/
seal - Weight [g]: 55
- Supplementary Article/Info 2: without thermostat
- Name: IM 90570
- Manufacturer: ORIGINAL IMPERIUM
- Fitting Position: Lower
-
Fabrication Number: CTM-
VW- 022 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Engine Code: AUB,
BBZ - Vehicle Identification Number (VIN) from: ******6Y*Y*021592
- Block Separation:
- Weight [kg]: 0.055
- Supplementary Article/Supplementary Info: with quick coupling
- for OE number: 6Q0 122 291 E
- Name: SW 30 94 5984
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Supplementary Article/Supplementary Info: with gasket/
seal - Material: Plastic
- Name: Jahutusvedeliku flants
- Manufacturer: MAX
-
Supplementary Article/Supplementary Info: with gasket/
seal - Cooling Hose: from connecting pipe to engine cooler
- Forward- /Backflow: for foreflow
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: MEY
- for OE number: 1J0121100
- Fitting Position: Lower
-
Supplementary Article/Supplementary Info: without gasket/
seal - Weight [g]: 88
- Supplementary Article/Info 2: without thermostat
- Name: IM 90361
- Manufacturer: ORIGINAL IMPERIUM
-
Vehicle Identification Number (VIN) to: 6Y-
Y- 021592 -
Supplementary Article/Supplementary Info: with gasket/
seal - for OE number: 1C0 122 291
- Consult accessories list for recommended additional repairs:
- Number of inlets/outlets: 2
-
Material: GRP
(Glass fibre Reinforced Plastic) - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty. Name: KRàCIEC UKADU CHODZENIA AUDI A3 SEAT ALHAMBRA, CORDOBA, IBIZA III, LEON, TOLEDO II SKODA FABIA I, FABIA II, OCTAVIA II, ROOMSTER
- Engine Code: AUB
- Construction Year to: 04.2007
- Name: EP 1.660.020
- Manufacturer: EPS
- Engine Code: AUB
- Construction Year to: 04.2007
- Manufacturer: FACET
- Colour: black
- Fitting Position: Lower
- Supplementary Article/Supplementary Info: with quick coupling
- Name: SW 30 94 6154
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Diameter 1 [mm]: 32
- for OE number: 1J0121619A
- Manufacturer: MEAT & DORIA
- General Information: Coolant flange
- Manufacturer: VIKA
- Cooling Hose: from thermostat to radiator
- Manufacturer: NRF
- Weight [kg]: 0.055
- Manufacturer: METALCAUCHO
- Temperature range from [°C]: 83
- Temperature range to [°C]: 98
- Material: Plastic
- Name: Jahutusvedeliku flants
- Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Upper
- for OE number: 6Q0122291E
- Manufacturer: NRF
- Manufacturer Restriction: HENSCHEL
- Fitting Position: Thermostat
- Cooling Hose: from thermostat to radiator
- Manufacturer: VERNET
-
Fitting Position: Radiator,
Upper - for OE number: 1J0121619A
- Manufacturer: NRF
- General Information: Coolant pipe
- Manufacturer: VIKA
- General Information: Coolant pipe
- Manufacturer: VIKA
- Opening Temperature [°C]: 87
- Weight [kg]: 0.12
-
Supplementary Article/Supplementary Info: with gasket/
seal - Weight [g]: 120
- Supplementary Article/Info 2: without sensor
- Manufacturer: METALCAUCHO
- Opening Temperature [°C]: 83
- Weight [kg]: 0.2
- Weight [g]: 200
-
Supplementary Article/Info 2: with sensor,
with thermostat - Manufacturer: METALCAUCHO
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks