• Quantity per packing unit: 10
• Inner Diameter [mm]: 28.5
• Sealing Ring Diameter [mm]: 28.5
• Thickness [mm]: 3.8
• Shape: O-Ring
• Manufacturer: TOPRAN

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Equipment: for vehicles with air conditioning
• Transmission Type: Manual Transmission
• Core Length [mm]: 629
• Core Width [mm]: 399
• Core Depth [mm]: 22
• Cooling fins material: Aluminium
• Water Tank Material (radiator): Plastic
• Lisainfo: Radiator, 630x413 mm, PL/ALU
• Additional information: Radiator, 630x413 mm, PL/ALU

• Quantity per packing unit: 10
• Thickness [mm]: 3.8
• Outer Diameter [mm]: 28.5
• Material: Rubber
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pressure [bar]: 1.5
• Manufacturer: ASHIKA

• Colour: blue
• Pressure [bar]: 1.4
• Material: Plastic
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Netopikkus [mm]: 430
• Netolaius [mm]: 415
• Netosügavus [mm]: 23
• Jahutusribi materjal: Alumiinium
• Piirangutega toode/piirangu info 2: ilma raamita
• Materjal veekamber (radiaator): Plastik
• Radiaatori tüüp: Jahutusribid mehaaniliselt ühendatud
• Lisainfo: VOLKSWAGEN POLO IV (9N) (01-) 1.4 i 16V
• Additional information: VOLKSWAGEN POLO IV (9N) (01-) 1.4 i 16V

• Core Length [mm]: 430
• Core Width [mm]: 416
• Core Depth [mm]: 23
• Transmission Type: Manual Transmission
• Vehicle Equipment: for vehicles without air conditioning
• Water Tank Material (radiator): Plastic
• Cooling fins material: Aluminium
• Assy./disassy. by qualified personnel required!:
• Name: AB 053-017-0039
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Vehicle Equipment: for vehicles without air conditioning
• Core Length [mm]: 430
• Core Width [mm]: 415
• Core Depth [mm]: 23
• Inlet Ø [mm]: 32
• Outlet Ø [mm]: 32
• Radiator type: Mechanically jointed cooling fins
• Packaging length [cm]: 59.5
• Packaging width [cm]: 44
• Packaging height [cm]: 11.5
• Weight [kg]: 2.2
• Manufacturer: AKSDASIS

• Vehicle Equipment: for vehicles without air conditioning
• Transmission Type: Manual Transmission
• Cooling fins material: Aluminium
• Core Depth [mm]: 23
• Core Length [mm]: 430
• Core Width [mm]: 414
• Radiator type: Mechanically jointed cooling fins
• Water Tank Material (radiator): Plastic
• Manufacturer: AVA

• Radiator type: Mechanically jointed cooling fins
• Cooling fins material: Aluminium
• Water Tank Material (radiator): Plastic
• Core Depth [mm]: 22
• Core Length [mm]: 430
• Core Width [mm]: 415
• Manufacturer: KAMOKA
• Additional information: 7705117 KAMOKA
• Lisainfo: 7705117 KAMOKA

• Vehicle Equipment: for vehicles with air conditioning
• Material: Aluminium
• Core Length [mm]: 635
• Core Width [mm]: 415
• Core Depth [mm]: 23
• Radiator type: Mechanically jointed cooling fins
• Lisainfo: 632*389*26
• Additional information: 632*389*26

• Construction Year to: 08.2002
• Vehicle Equipment: for vehicles without air conditioning
• Vehicle Identification Number (VIN) to: 6Y3647001
• Material: Aluminium
• Heating/Cooling: excl. Radiator Fan
• Core Length [mm]: 430
• Core Width [mm]: 415
• Core Depth [mm]: 23
• Version: Alternative
• Radiator type: Mechanically jointed cooling fins
• Manufacturer: NRF
• Lisainfo: 430*414*23
• Additional information: 430*414*23

• Radiator type: Mechanically jointed cooling fins
• Core Length [mm]: 416
• Core Width [mm]: 430
• Core Depth [mm]: 23
• Manufacturer: JPN

• Core Length [mm]: 630
• Core Width [mm]: 415
• Core Depth [mm]: 23
• Transmission Type: Manual Transmission
• Vehicle Equipment: for vehicles with air conditioning
• Water Tank Material (radiator): Plastic
• Cooling fins material: Aluminium
• Assy./disassy. by qualified personnel required!:
• Name: AB 053-017-0040
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Vehicle Equipment: for vehicles with air conditioning
• Radiator type: Mechanically jointed cooling fins
• Core Length [mm]: 416
• Core Width [mm]: 630
• Core Depth [mm]: 23
• Manufacturer: JPN

• Vehicle Equipment: for vehicles with air conditioning
• Transmission Type: Manual Transmission
• Cooling fins material: Aluminium
• Core Depth [mm]: 23
• Core Length [mm]: 630
• Core Width [mm]: 414
• Radiator type: Mechanically jointed cooling fins
• Water Tank Material (radiator): Plastic

• Vehicle Equipment: for vehicles with air conditioning
• Transmission Type: Manual Transmission
• Cooling fins material: Aluminium
• Core Depth [mm]: 23
• Core Length [mm]: 630
• Core Width [mm]: 414
• Inlet Ø [mm]: 32
• Outlet Ø [mm]: 32
• Radiator type: Mechanically jointed cooling fins
• Supplementary Article/Info 2: without expansion tank, with thermostat
• Water Tank Material (radiator): Plastic
• Manufacturer: AVA

• Core Length [mm]: 430
• Core Width [mm]: 416
• Core Depth [mm]: 23
• Transmission Type: Manual Transmission
• Vehicle Equipment: for vehicles without air conditioning
• Water Tank Material (radiator): Plastic
• Cooling fins material: Aluminium
• Article number of recommended accessories: 053-014-0014
• Assy./disassy. by qualified personnel required!:
• Name: AB 053-017-0038
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Material: Aluminium, Plastic
• Transmission Type: Manual Transmission
• Vehicle Equipment: for vehicles without air conditioning
• Core Length [mm]: 430
• Core Width [mm]: 414
• Core Depth [mm]: 23
• Lisainfo: Radiator, 430x414 mm, PL/ALU
• Additional information: Radiator, 430x414 mm, PL/ALU

• Core Depth [mm]: 0
• Core Length [mm]: 0
• Core Width [mm]: 0
• General Information: radiator; pipe enlarging
• Manufacturer: VIKA

• Engine Code: AUB, BBZ
• Core Depth [mm]: 23
• Core Length [mm]: 630
• Core Width [mm]: 414
• Radiator type: Mechanically jointed cooling fins
• Technical Information: Aluminium core with plastyic tanks
• Name: MM BM841
• Manufacturer: MAGNETI MARELLI

• Transmission Type: Automatic Transmission
• Cooling fins material: Aluminium
• Core Depth [mm]: 26
• Core Length [mm]: 630
• Core Width [mm]: 399
• Radiator type: Mechanically jointed cooling fins
• Water Tank Material (radiator): Plastic

• Vehicle Equipment: for vehicles with air conditioning
• Transmission Type: Manual Transmission
• Cooling fins material: Aluminium
• Core Depth [mm]: 23
• Core Length [mm]: 630
• Core Width [mm]: 416
• Inlet Ø [mm]: 32
• Outlet Ø [mm]: 32
• Radiator type: Mechanically jointed cooling fins
• Supplementary Article/Info 2: without expansion tank
• Supplementary Article/Supplementary Info: with gaskets/seals
• Water Tank Material (radiator): Plastic
• Manufacturer: NISSENS
• Name: NI 652711
• Lisainfo: VOLKSWAGEN POLO IV (9N) (01-) 1.4 i 16V
• Additional information: VOLKSWAGEN POLO IV (9N) (01-) 1.4 i 16V

Installation Information: FIRST FIT - a time-saving installation! Find all additional parts such as caps, gaskets, nuts, clamps, plugs, bolts, fittings, screws and other parts in the box

• Vehicle Equipment: for vehicles without air conditioning
• Transmission Type: Manual Transmission
• Cooling fins material: Aluminium
• Core Depth [mm]: 23
• Core Length [mm]: 430
• Core Width [mm]: 415
• Inlet Ø [mm]: 32.5
• Outlet Ø [mm]: 32.5
• Radiator type: Mechanically jointed cooling fins
• Supplementary Article/Info 2: without expansion tank
• Supplementary Article/Supplementary Info: without gasket/seal
• Water Tank Material (radiator): Plastic
• Manufacturer: NISSENS
• Name: NI 652691
• Lisainfo: VOLKSWAGEN POLO IV (9N) (01-) 1.4 i 16V
• Additional information: VOLKSWAGEN POLO IV (9N) (01-) 1.4 i 16V

• Transmission Type: Manual Transmission
• Core Length [mm]: 633
• Core Width [mm]: 415
• Core Depth [mm]: 30
• Inlet Ø [mm]: 32
• Outlet Ø [mm]: 32
• Radiator type: Mechanically jointed cooling fins
• Packaging length [cm]: 82.6
• Packaging width [cm]: 44.3
• Packaging height [cm]: 11.2
• Weight [kg]: 2.52
• Manufacturer: AKSDASIS

• Radiator type: Mechanically jointed cooling fins
• Cooling fins material: Aluminium
• Water Tank Material (radiator): Plastic
• Core Depth [mm]: 23
• Core Length [mm]: 635
• Core Width [mm]: 415
• Manufacturer: KAMOKA

• Construction Year from: 03.2001
• Transmission Type: Manual Transmission
• Vehicle Equipment: for vehicles without air conditioning
• Core Length [mm]: 430
• Core Width [mm]: 415
• Core Depth [mm]: 23
• Inlet Ø [mm]: 32
• Outlet Ø [mm]: 32
• Radiator type: Mechanically jointed cooling fins
• Packaging length [cm]: 63
• Packaging width [cm]: 47
• Packaging height [cm]: 16.5
• Weight [kg]: 1.84
• Manufacturer: AKSDASIS

• Radiator type: Mechanically jointed cooling fins
• Core Length [mm]: 630
• Core Width [mm]: 415
• Core Depth [mm]: 23
• Water Tank Material (radiator): Plastic
• Transmission Type: Automatic Transmission, Manual Transmission
• Packaging width [cm]: 12
• Net Weight [g]: 3,274
• Packaging height [cm]: 46.5
• Packaging length [cm]: 79
• Name: MH CR505000S
• Manufacturer: MAHLE

General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.

• Transmission Type: Manual Transmission
• Core Length [mm]: 632
• Core Width [mm]: 389
• Core Depth [mm]: 26
• Inlet Ø [mm]: 32
• Outlet Ø [mm]: 32
• Radiator type: Mechanically jointed cooling fins
• Water Tank Material (radiator): Plastic
• Cooling fins material: Aluminium
• Packaging length [cm]: 76
• Packaging width [cm]: 46
• Packaging height [cm]: 14
• Weight [kg]: 2.382
• Manufacturer: AKSDASIS

• Vehicle Identification Number (VIN) to: 6Y3647001, 6Y_3_647001
• Radiator type: Mechanically jointed cooling fins
• Core Length [mm]: 430
• Core Width [mm]: 413
• Core Depth [mm]: 26
• Water Tank Material (radiator): Plastic
• Supplementary Article/Info 2: with seal ring
• Vehicle Equipment: for vehicles without air conditioning
• Transmission Type: Manual Transmission
• Packaging height [cm]: 10.5
• Net Weight [g]: 1,840
• Packaging width [cm]: 44
• Packaging length [cm]: 62.5
• Name: MH CR454000S
• Manufacturer: MAHLE

General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.

• Transmission Type: Manual Transmission, Automatic Transmission
• Vehicle Equipment: for vehicles with automatic climate control
• Core Length [mm]: 632
• Core Width [mm]: 395
• Core Depth [mm]: 24
• Inlet Ø [mm]: 32
• Outlet Ø [mm]: 32
• Radiator type: Mechanically jointed cooling fins
• Water Tank Material (radiator): Plastic
• Cooling fins material: Aluminium
• Packaging length [cm]: 79.5
• Packaging width [cm]: 47
• Packaging height [cm]: 11.5
• Weight [kg]: 2.42
• for OE number: 6Q0121253M
• Manufacturer: AKSDASIS

• Vehicle Equipment: for vehicles without air conditioning
• Transmission Type: Manual Transmission
• Cooling fins material: Aluminium
• Core Depth [mm]: 23
• Core Length [mm]: 430
• Core Width [mm]: 415
• Inlet Ø [mm]: 32.5
• Outlet Ø [mm]: 32.5
• Radiator type: Mechanically jointed cooling fins
• Supplementary Article/Info 2: without expansion tank
• Supplementary Article/Supplementary Info: without gasket/seal
• Water Tank Material (radiator): Plastic
• Manufacturer: NISSENS
• Lisainfo: VOLKSWAGEN POLO IV (9N) (01-) 1.2 i 12V
• Additional information: VOLKSWAGEN POLO IV (9N) (01-) 1.2 i 12V

Installation Information: FIRST FIT - a time-saving installation! Find all additional parts such as caps, gaskets, nuts, clamps, plugs, bolts, fittings, screws and other parts in the box

• Vehicle Identification Number (VIN) from: 6Y_3_647002
• Vehicle Identification Number (VIN) to: 6Y_3_647001
• Vehicle Equipment: for vehicles without air conditioning
• Core Width [mm]: 415
• Core Length [mm]: 430
• Core Depth [mm]: 23
• Material: Aluminium
• Inlet Ø [mm]: 32
• Outlet Ø [mm]: 32
• Heating/Cooling: for vehicles without oil cooler
• Supplementary Article/Info 2: with coolant regulator
• Radiator type: Mechanically jointed cooling fins
• Weight [kg]: 3
• Name: VA 733062
• Manufacturer: VALEO

• Construction Year from: 09.2002
• Vehicle Equipment: for vehicles without air conditioning
• Vehicle Identification Number (VIN) from: 6Y_3_647002
• Material: Aluminium
• Heating/Cooling: incl. fan
• Core Length [mm]: 430
• Core Width [mm]: 415
• Core Depth [mm]: 23
• Radiator type: Mechanically jointed cooling fins
• Manufacturer: NRF
• Lisainfo: 430*413*23
• Additional information: 430*413*23

• Construction Year to: 04.2007
• Engine Code: AUB, BBZ
• Vehicle Equipment: for vehicles without air conditioning
• Transmission Type: 5-Speed Manual Transmission
• Core Length [mm]: 430
• Core Width [mm]: 415
• Core Depth [mm]: 23
• Radiator type: Mechanically jointed cooling fins
• Technical Information: Aluminium core with plastyic tanks
• Name: MM BM851
• Manufacturer: MAGNETI MARELLI

• Vehicle Equipment: for vehicles without air conditioning
• Transmission Type: Manual Transmission
• Cooling fins material: Aluminium
• Core Depth [mm]: 23
• Core Length [mm]: 430
• Core Width [mm]: 415
• Radiator type: Mechanically jointed cooling fins
• Water Tank Material (radiator): Plastic

• Radiator type: Mechanically jointed cooling fins
• Heating/Cooling: incl. fan
• Core Length [mm]: 430
• Core Width [mm]: 415
• Core Depth [mm]: 20
• Water Tank Material (radiator): Plastic
• Vehicle Equipment: for vehicles without air conditioning
• Transmission Type: Manual Transmission
• Packaging width [cm]: 15.5
• Net Weight [g]: 2,590
• Packaging height [cm]: 61.5
• Packaging length [cm]: 90
• Name: MH CR123000S
• Manufacturer: MAHLE

General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.