Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Inner Diameter [mm]: 23
- Outer Diameter [mm]: 35
- Dust Cover: with dust lip
-
Swirl Type: Left-
hand Twist - Thickness [mm]: 7
- Manufacturer: DELLO AUTOMEGA
- Height [mm]: 7
- Inner Diameter [mm]: 48
- Outer Diameter [mm]: 62
- Weight [kg]: 0.02
-
Thickness [mm]: 7,
6.5 - General Information: Oil seal for differential shaft; 48x62x7mm
- Manufacturer: VIKA
-
Transmission Type: 5-
Speed Manual Transmission - Inner Diameter [mm]: 15
- Outer Diameter [mm]: 24
- Height [mm]: 6
-
Material: ACM
(Polyacrylate) - Manufacturer: TOPRAN
- Lisainfo: 100 355 HP
- Additional information: 100 355 HP
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Height [mm]: 10
- Inner Diameter [mm]: 50
- Outer Diameter [mm]: 65
- General Information: Oil seal for differential shaft; 50x65x10mm
- Manufacturer: VIKA
-
Transmission Type: 5-
Speed Manual Transmission -
Fitting Position: Left,
Centre -
Thickness [mm]: 7,
6.5 - Inner Diameter [mm]: 48
- Weight [kg]: 0.02
-
Name: VOLLI RONGASTIHEND,
MANUAALK.KASTI FLANTS - Manufacturer: FEB
- Additional information: FE15263
- Lisainfo: FE15263
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Transmission Type: 5-
Speed Manual Transmission - Vehicle Equipment: for vehicles with manual transmission
- Thickness [mm]: 6
- Outer Diameter [mm]: 24
- Inner Diameter [mm]: 15
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Inner Diameter [mm]: 48
- Outer Diameter [mm]: 62
-
Fabrication Number: NUP-
VW- 032 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Weight [kg]: 0.02
- Inner Diameter [mm]: 21.8
- Outer Diameter [mm]: 35
-
Material: ACM
(Polyacrylate) - Thickness [mm]: 7
- General Information: Oil seal for transmission; for first shaft
- Manufacturer: VIKA
- Engine Code: AHF
- Fitting Position: Front
- Height 1 [mm]: 10
- Outer Diameter 1 [mm]: 47
- Inner Diameter 1 [mm]: 32
-
Material: FPM
(fluoride rubber) - for OE number: 026103085D
- Swirl Type: Alternating Twist
- Dust Cover: with dust lip
-
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: COT
- Additional information: 12012709
- Lisainfo: 12012709
- Model Year from: 2001
- Inner Diameter [mm]: 48.4
- Outer Diameter [mm]: 65.2
- Manufacturer: FEBEST
- General Information: Oil seal for differential shaft; 50*65*8
- Manufacturer: VIKA
- Thickness [mm]: 7
- Inner Diameter [mm]: 21.8
- Outer Diameter [mm]: 35
-
Material: ACM
(Polyacrylate) - Weight [kg]: 0.02
-
Name: VOLLI RONGASTIHEND,
KIGUKAST - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Transmission Type: 5-
Speed Manual Transmission - Inner Diameter [mm]: 21.8
- Outer Diameter [mm]: 35
- Height [mm]: 7
- Radial Shaft Seal Design: ASW
-
Swirl Type: Right-
hand Twist -
Material: ACM
(Polyacrylate) - Dust Cover: with dust lip
- Manufacturer: ELRING
- Fitting Position: Inlet
-
Transmission Code: DEA,
EBF, EGS - Height 1 [mm]: 7
- Outer Diameter 1 [mm]: 35
- Inner Diameter 1 [mm]: 21.8
-
Material: ACM
(Polyacrylate) -
Swirl Type: Right-
hand Twist - Dust Cover: with dust lip
-
Name: VOLLI RONGASTIHEND,
KIGUKAST - Manufacturer: COT
- Inner Diameter [mm]: 15
- Outer Diameter [mm]: 24
- Height [mm]: 6.5
- Radial Shaft Seal Design: ASW OF
-
Material: HNBR
(hydrogenated nitrile butadiene rubber) - Dust Cover: with dust lip
- Manufacturer: ELRING
- Lisainfo: 886.780 ELRING
- Additional information: 886.780 ELRING
-
Fitting Position: Inlet,
frontal sided, Front - Inner Diameter 1 [mm]: 28
-
Material: FPM
(fluoride rubber) - for OE number: 02M311113
- Outer Diameter 1 [mm]: 42
- Dust Cover: with dust lip
- Height 1 [mm]: 7
-
Swirl Type: Right-
hand Twist -
Name: VOLLI RONGASTIHEND,
KIGUKAST - Manufacturer: COT
-
Transmission Type: 5-
Speed Manual Transmission -
Transmission ID: DLP/
CZE/ DRZ/ DRY, DUU/ DUS/ DUT/ CZB, DUW - Thickness [mm]: 8
- Inner Diameter [mm]: 23.9
- Outer Diameter [mm]: 40
-
Material: ACM
(Polyacrylate) - Weight [kg]: 0.01
-
Name: VOLLI RONGASTIHEND,
KIGUKAST - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- General Information: Oil seal for differential shaft
- Manufacturer: BORSEHUNG
- Housing material: Sheet Steel
- Supplementary Article/Info 2: with shaft seal
-
Sealing lip material: ACM
(Polyacrylate) - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Weight [g]: 77
- Supplementary Article/Info 2: with shaft seal
- Manufacturer: IMP
General Information: The installation of this product can be performed only in a workshop environment by trained professionals Name: TULEJA PROWADZ¤CA SPRZ. AUDI A1/A2/A3/Q2/TT 1,4-2,0 96-
- Fitting Position: Inlet
-
Transmission Code: DEA,
EBF, EGS - Supplementary Article/Info 2: with shaft seal
- Height 1 [mm]: 49.1
- Outer Diameter 1 [mm]: 31
- Outer Diameter 2 [mm]: 47
- Inner Diameter 1 [mm]: 21.8
-
Material: ACM
(Polyacrylate) - Version: Clutch Guide Tube
- Manufacturer: CORTECO
- Name: CO 01036165
- Outer Diameter [mm]: 47
- Thickness [mm]: 10
- Inner Diameter [mm]: 32
- Fitting Position: transmission sided
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks